Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Got it yesterday. It looks great. Thanks a bunch
|
Re: DBW pedal mounting bracket
Are these still available ? I would like to package one with the hood brackets if you do.
Thanks, Anthony |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Need one for a 05 truck pedal if you have one available.
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Ok,Thanks
|
Re: DBW pedal mounting bracket
Intestred in a bracket for my 86. I have a pedal from an 05 Cadillac Escalade EXT.
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
For all of the guys looking for a pedal bracket to work with the 73-87 trucks, here's a thread that has some great info in it:
http://67-72chevytrucks.com/vboard/s...d.php?t=692222 http://www.hotrodlane.cc/Streetstories/81%20swap.pdf Apparently a factory OEM gas pedal from a 94-02 CHEVY GMC 6.5L V8 DIESEL (PN 15984422) will bolt right in. You have to repin a few wires, but it's supposed to be pretty straight forward. The .pdf file has a complete discussion on the entire install, but here is a small snippet: "This is the installed Pedal Position Sensor AKA Drive by Wire pedal. I used one from a 1998 6.5 Diesel truck as it bolts right up and is a closer match than the later Silverado pedal. A couple of the wires do have to be moved as it is internally wired different. Basically, there are three different sensors in the pedal and the PCM compares all three of these to determine how much throttle opening the drivers is requiring. If these three sensors do not agree, a code will be set and the PCM takes a best guess at what the throttle opening should be. The gray wire was moved from location A to J, the Brown wire was moved from location E to A and the Yellow wire was moved from location J to E. I also had to add a slot in the connector plug so it would plug into the pedal." PLEASE NOTE I HAVEN'T TRIED THIS ON A TRUCK, I'M JUST PASSING THE INFORMATION. DO YOUR HOMEWORK BEFORE YOU PURCHASE ANY PARTS!!!! Good luck with your LS Swap!!! |
Re: DBW pedal mounting bracket
Rob, i would like one of your corvette pedal brackets, i have sent a Paypal payment to the email listed on page 1
Paypal: robhartley@aol.com, enter "CPB" in message block. Thank you! |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Rob, I received my bracket today, excellent service, Thank You!:metal:
|
Re: DBW pedal mounting bracket
Rob, just sent a Paypal payment for a Gen IV pedal bracket for a 72. Thank you.
|
Re: DBW pedal mounting bracket
Quote:
Quote:
Rob |
Re: DBW pedal mounting bracket
bump
|
Re: DBW pedal mounting bracket
Just wanted to say that interestingly enough I too had the same problem as "derotoreut" with my holes not lining up and my blazer is a '72 purchased in Texas. It wasn't a problem for me, I just lined up the bottom hole, drilled 2 new holes and welded up the old ones. I wonder if it would be location, mine was made in April of 72 in Flint.
|
Re: DBW pedal mounting bracket
Hi Rob,
I need one of the Corvette pedal brackets,I'm going to send you the payment in a few minutes. Thanks Brian |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Thanks Rob
Have a great new year !! Brian |
Re: DBW pedal mounting bracket
1 Attachment(s)
Hi Rob,
I am going to use a DBW truck pedal out of a 2008 Gen IV in my '71. Do you know if I need the bracket for the Corvette pedal or the bracket for the Gen III trucks? Here's a picture of my pedal for your reference. Thanks Rob. |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
HartR, do you have anymor in stock? I would like to order one if you do. Thanks
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Good deal for just 50 usd
|
Re: DBW pedal mounting bracket
I've got an 86 k10 with a 2006 Silverado 5.3 pedal. Do you have a bracket for this setup? Do I need to upload a pic of anything? Minor modifications not an issue.
I'll share this info over at GMSquarebody if it works out. Thanks Dude 'maro |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
3 Attachment(s)
Not sure if you need a pic of the full pedal.
|
Re: DBW pedal mounting bracket
The bottom pic tape measure has the 1" mark lined up with the center of the top hole if that helps.
|
Re: DBW pedal mounting bracket
I think you can probably make it work, but I can't guarantee it. Let me know what you want to do.
|
Re: DBW pedal mounting bracket
Do you have any of the Corvette pedal mounting brackets left?
|
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Just sent you paypal. The address attached is correct to send to.
Thanks! |
Re: DBW pedal mounting bracket
Quote:
|
Re: DBW pedal mounting bracket
Pay pal sent
|
All times are GMT -4. The time now is 03:53 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com