![]() |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Ok great just PM me on how much its gonna cost me :) ...lets see...if I sell the 58 ford wagon project and my recently acquired 51 ford coupe project...and and and...:crazy: Mark |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
That has to be one of the best documented and coolest jobs ever. I get started on something and forget to take half of the pictures!!! I had a thought for the top if someone does another one. If you left the back section a 1/2" long and flanged the front I bet it would come together with just small cuts on the rear section at the drip rail. My hat is off to you!!! Dave
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Mike |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Let me just say, "You are the Man", sweet project!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
:jdp: WWWWWWOOOOOOWWWWWW :jdp:
I knew that Iwould see some cool stuff when I joined this board, but I didn't think that it would be something THAT awesome!!!! That is absolutely incredible... And I am not sure what your occupation is.... but I noticed that you said that you do this as a hobby.... You could be the next Boyd Coddington!!! Great body work, motivation, and will to complete..... My hat is off to you!!!!!!!!!!!!! Frizzle Fry the Great ----- Master of the Tah-burban |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
An angle grinder?? I cant even draw a straight line period hats off to you bro only thing i would have done was find one with barn doors I always liked that look otherwise, its the most bad ass thing i have ever seen. ranks right up there with the 69 Daytona I saw. Talk about some amazing metal work every thing on those is steel & lead course all the lead workers are all dead. This is bad ass!!!!!!!!!!!!!!!!!!!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I love it. I wonder if 1 peice glass could be made to get rid of those small rear widows or would it not work in the door.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Awesome Work! You definetely follow the rule of the 5 P's: Proper Planning Prevents Poor Performance. You planned for a year, and your performance definetly shows. By your step by step procedure, I could see alot of people following suit and building their own Tahoe. Thanks and congrats!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
No the small door section is their so the large section can go up and down with out hitting the structure. So do you thing the welding up will take longer then the total chop job? I love doing this stuff but hate the slow weldind process. And what the heck do you mean about the 4th door and knowing your limits! Although your method is almost what has been done in my head over the last year (minus the 4th door) you pulled it off before me and my hats off to ya! Kevin LFD Inc. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
I have no doubts I could pull off the 4th door. Just not in the timeline I had available to get this thing back on the road. Maybe a future upgrade;) :hm: |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thanks for the link FizzleFry, now I can see why everyone was oh ing and ah ing, very nice. I had thoughts of doing this (No time and my skills are not up to you ability) so I have placed it into the when I retire file. I'll retire in about 18 years at 52yo so I'll hopefully have the gumption to tackle this type of chop.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
The windows on my 95 Tahoe dont go all the way down becuse of the doors have the cut out for the tires if you can live with form over function I would go for it. every one would think you had some rare concept from GM they cant even get the windows all the way down on the new Tohoes.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
That looks AWESOME!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
my God Man Are You Insane.excellent Craftsmenship.very Impressive.very Unique,very Talented.sweet Fancy Moses.[/b]
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Appreciatin the props guys. I love how it turned out.
I got the top all lined up and tacked the way I wanted it. Since the mis-match was high-front/low-back, I could have either brought the front down to match the back, brought the back up to match the front, or moved both to meet half way. Well, after looking at it and looking at the pictures I decided the back needed to come up to give it the roof line I wanted. So I made two relief cuts in the rear roof and added more high density foam under the rear most roof support. Those have this foam strip in the center of the ribs factory so I took the strip out of the one that got cut out along with the 20" of roof, and added it to this one. http://s6.photobucket.com/albums/y23...1886Medium.jpg Extra foam: http://s6.photobucket.com/albums/y23...1888Medium.jpg I also cut the upper trim and put in in place for a test fit (ya, a little ahead of myself, but I wanted so see it...). http://s6.photobucket.com/albums/y23...1884Medium.jpg All lined up... http://s6.photobucket.com/albums/y23...1890Medium.jpg http://s6.photobucket.com/albums/y23...1891Medium.jpg http://s6.photobucket.com/albums/y23...1892Medium.jpg http://s6.photobucket.com/albums/y23...1893Medium.jpg http://s6.photobucket.com/albums/y23...1898Medium.jpg http://s6.photobucket.com/albums/y23...1902Medium.jpg |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
More...
http://s6.photobucket.com/albums/y23...1903Medium.jpg http://s6.photobucket.com/albums/y23...1904Medium.jpg ...and some wide shots with the roof and upper trim done: http://i6.photobucket.com/albums/y23...g?t=1178767883 http://i6.photobucket.com/albums/y23...g?t=1178767883 http://i6.photobucket.com/albums/y23...g?t=1178767883 http://i6.photobucket.com/albums/y23...g?t=1178767883 |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
looking better and better....i love this thread...thanks for all the pics....
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Quote:
Just promise not to laugh, my 'burb won't measure up (well, it will in length, just not in mods:lol: ), but I work on it when I can. Motor swap coming soon. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Wow. I'm very impressed! I think it's time to start taking some welding classes.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
That is flat out the sickest thing I have seen. True talent.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
You are a master! :metal: Keep up the progress!
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
2 Attachment(s)
Mike,
Thanks buddy... I almost choked when I saw this. Absolutely amazing... Do you remember the photochop I did of one a while ago... Yours is pretty darn close! Can't wait to see it done. :) |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
looking very nice...what's the plan for the wheels? I think it needs larger rims with a little more meat on em...
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
3 Attachment(s)
Quote:
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Thats amazing. Sure to be on a magazine someday
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
2 Attachment(s)
More on the wheels: Here's a quick mspaint job stretching the current wheels to 20/22 and a little drop. I think we may have a verdict :)
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Are you going to do air suspension?
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
I have to say I like the daisy wheels, but the coy's should look good too. Here's a crappy MSpaint chop to make a quasi-Nomad from your now shorty burb...
This is by no means a Frizzle needs to do this to his, just a quick MS doodle to see what my mind was thinking of when I thought of a 69 Nomad. To make the porportions work better for a traditional 2dr nomad I had to stretch the front door, add the slanted b-pillar, eliminate the 3rd door and add the chrome window divider bar for the quarter glass. Hijack over... |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
Quote:
Quote:
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I like the chrome rims better (torque thrusts maybe?) to match the 69-70 chrome grille and bumpers....
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Awesome bro .... freekin' awesome! :metal:
You, sir, are my hero! |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
I’m speechless!
That is one sweet ride my man. Well done! :thumbs: s/t |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
Awesome is the only word I can say, and to do it in that amount of time is inspiring.
|
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
FF, I'm amazed at your creation! I would love to see it in person sometime.:metal:
Btw, I saw this several years ago on this board and kept a copy. I don't have a clue who it belongs to though. |
Re: Joined the Short Wheelbase Club *69 Tahoe Project*
1 Attachment(s)
'preciate it my brothas! I agree about the chrome wheels. I want the chrome versions of Gringoloco's (Coy C5).
Brad, that's a photochop of mine! :lol: Here's the original: |
All times are GMT -4. The time now is 02:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com