The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today.The 3rd chapter (https://67-72chevytrucks.com/vboard/showthread.php?t=773345)

FL71C10 11-11-2018 08:04 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Speedracer39 (Post 8382084)
I was wondering what brand of fans did you buy and how is the fit?

I bought the fans and the Shroud separately. My friend actually gave me the fans, they are 14 in cheap generic fans. I got the Shroud from ledfoot racing. It's designed to go on a replacement Champion radiator but it fit very nicely on my four row original radiator.

samkost 11-11-2018 08:42 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
I got a few things done.
Radiator overflow installed/plumbed.
Some new firewall grommets.
Cleaned up my small garage, tools and work bench.
Next on the to do list, wiper washer hoses.
Time for dinner and a brew:b69::b69::D

Jim70Chevy 11-11-2018 09:01 PM

Re: What did you do to your truck today.The 3rd chapter
 
5 Attachment(s)
This weekend I tackled the drip guard. I started by removing the old seam sealer. I used a chisel for much of it and then based on a tip from this board I finished it with a wire wheel. I then treated the whole channel with a couple coats of por15 and let it dry overnight. Next day I used the self leveling seam sealer and after letting that dry for several hours (the label says you need 30 minutes) I gave it a coat of TCP 2k epoxy primer using the preval sprayer.

nlped 11-11-2018 09:33 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Didn’t get any of the parts I’ve waiting on to move forward in Walter so I started on the install of the CVF serpentine pulley setup (bought it at SEMA show) and Sanden 508 a/c install on my ‘77 square.

kcmarkd 11-14-2018 06:23 PM

Re: What did you do to your truck today.The 3rd chapter
 
Replaced the alternator and re-did the shattered connector plug. While I was at it, I saw that the fuel pump was squirting gas from the weep holes in the top of the mechanical pump. So, got a new pump and will be doing that next.

Steeveedee 11-14-2018 07:51 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by kcmarkd (Post 8384383)
Replaced the alternator and re-did the shattered connector plug. While I was at it, I saw that the fuel pump was squirting gas from the weep holes in the top of the mechanical pump. So, got a new pump and will be doing that next.

Smell your oil for fuel. When the diaphragm goes, the pump can leak fuel into the oil.

332rick 11-14-2018 08:58 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Working on my brakes - replacing everything but the drum.

kcmarkd 11-14-2018 09:12 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Steeveedee (Post 8384449)
Smell your oil for fuel. When the diaphragm goes, the pump can leak fuel into the oil.

Good to know. It is time for an oil change anyway, so will take care of that after I replace the pump. Thanks!

PepperTreeGarage 11-14-2018 11:04 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Finished the C-Notch and helper bag mount with extra inner and outer plates on the C20.

Canuckvetter 11-15-2018 06:33 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Freshened up a gauge cluster for the 67 Vermillion/white CST. Going to go from this broken bezel.....

Attachment 1838843


To this.

Special thanks to TBONE1964 for the calibrate and paint on the speedo and TOO MUCH STUFF for the choke delete & throttle place card.

Attachment 1838844

kcmarkd 11-19-2018 07:35 AM

Re: What did you do to your truck today.The 3rd chapter
 
Installed cowl vent trash guards, and replaced the cowl fresh air flap. Removed failed fuel pump, only to find that the parts store sold me the wrong one. So, will be getting the right pump today, then reinstall later tonight.

In the mean time, spent some time working to understand the AC vacuum routing/functionality and replaced a few of the 50 year old vacuum lines under the dash.

72LB 11-19-2018 09:43 AM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Working on a disc brake upgrade and rearend swap.

Triple7 11-19-2018 10:19 AM

Re: What did you do to your truck today.The 3rd chapter
 
Having a new windshield installed :D

NoStopN 11-19-2018 06:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
Yesterday, I finally slid the tail lights into my bed. I'm just glad that the wiring worked as it should.

https://c1.staticflickr.com/5/4895/3...96c54545_b.jpg

samkost 11-19-2018 08:46 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
Finished the 72's rear trim this weekend.
Taillights, upper/lower tailgate trim and a new sport bumper.
The taillight bezels were fun........not! :lol:

A shout out to forum members:

Wes, Classic Heartbeat
Mark, CG
Leon, LockDoc

Thanks for your help and advice gentlemen:clap::clap::clap:

Sam

Grumpy old man 11-20-2018 05:33 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
New Moog control arm shafts . Just waiting on more parts ...As Always ..:smoke:

70STOVEBOLT 11-20-2018 05:40 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Got one upper control arm ready to install. Went with Dorman shaft kits and GM NOS upper ball joint. Blasting the other one tonight and getting it assembled and painted hopefully by tomorrow.

Grumpy old man 11-20-2018 06:04 PM

Re: What did you do to your truck today.The 3rd chapter
 
4 Attachment(s)
Everything on this truck is being restored /repaired or replaced and it will be sold once it's finished and I'll go on to the next one .:chevy:

Grumpy old man 11-20-2018 06:06 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
front to back .

samkost 11-20-2018 06:20 PM

Re: What did you do to your truck today.The 3rd chapter
 
Very nice work Grumpy,:metal:
Do you have a build thread?
I'm curious what year, model and color(s) truck you are restoring.
Thanks,
Sam

Grumpy old man 11-20-2018 07:07 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by samkost (Post 8388501)
Very nice work Grumpy,:metal:
Do you have a build thread?
I'm curious what year, model and color(s) truck you are restoring.
Thanks,
Sam

67 short beds , I have a few to build , lt Green 292/3 speed hurst floor shift / 3.73 posi / 2-4 drop / buckets/ consol /air /ps/pb, Yellow 350 4 speed rock crusher floor shift hurst ps/pb/air/ 3-5 drop / 3.73 posi/ , Black ,red interior 292 tri power 4 speed floor shift/ consol /3.73 posi / ps/pb/air/ Not sure on the rest of them yet color wise .:chevy:

NoStopN 11-27-2018 06:21 PM

Re: What did you do to your truck today.The 3rd chapter
 
I drove it to work, then the gas station, then home. It's pulling daily driver duty this week while the new Ram is at the body shop.

weq92f 11-29-2018 07:59 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
.
Got the passenger wires loomed up and length-calibrated for the headers!

70STOVEBOLT 11-29-2018 08:41 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by weq92f (Post 8395479)
.
Got the passenger wires loomed up and length-calibrated for the headers!

What kind of looms are those?

j286 11-29-2018 11:02 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Working on filler panels!

weq92f 11-30-2018 02:59 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 70STOVEBOLT (Post 8395509)
What kind of looms are those?

Good question...They came with the truck and have no markings other than a chevy emblem. They are quality though as the parts that hold the wires are all metal and they slide together nice and tight. No brittle plastic here!

These are the type that bolt to lower BBC valve cover and hold the wires just above the headers.

-klb

70STOVEBOLT 11-30-2018 03:10 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by weq92f (Post 8395983)
Good question...They came with the truck and have no markings other than a chevy emblem. They are quality though as the parts that hold the wires are all metal and they slide together nice and tight. No brittle plastic here!

These are the type that bolt to lower BBC valve cover and hold the wires just above the headers.

-klb

That is what I have been looking for. I have the OEM style plastic ones that slide over the tabs welded to the stock valve covers but I don't like them with the headers.

weq92f 11-30-2018 03:16 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Found what I have... They are not cheap but... they are quality like I said...

Proform 141-638 Linear Spark Plug Wire Loom

https://www.amazon.com/Proform-141-6.../dp/B000CMH2GG


Quote:

Originally Posted by 70STOVEBOLT (Post 8395998)
That is what I have been looking for. I have the OEM style plastic ones that slide over the tabs welded to the stock valve covers but I don't like them with the headers.

-klb

weq92f 11-30-2018 03:22 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
.
The loom back on the truck...

70STOVEBOLT 11-30-2018 03:26 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by weq92f (Post 8396005)
Found what I have... They are not cheap but... they are quality like I said...

Proform 141-638 Linear Spark Plug Wire Loom

https://www.amazon.com/Proform-141-6.../dp/B000CMH2GG




-klb

Thank you for taking the time to check this out and post the link, I appreciate it.

3757chevy 11-30-2018 07:39 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Drove it 91 mile round trip to get a new washer and dryer. (there goes my truck budget)

tdangle 11-30-2018 07:51 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 3757chevy (Post 8396165)
Drove it 91 mile round trip to get a new washer and dryer. (there goes my truck budget)

Happens to me all the time. Just when I get some $ put away for my truck, it just seems to disappear

leddzepp 11-30-2018 10:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Put a chrome bumper and guards on my :gmc2:

Pro299 11-30-2018 11:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 70STOVEBOLT (Post 8396017)
Thank you for taking the time to check this out and post the link, I appreciate it.

Those are quality looms. I had them for over 20 years on an Impala SS. Not a daily mind you, but with a little wipe-down at the start of each year they looked like new.

rechinca 12-01-2018 09:53 AM

Re: What did you do to your truck today.The 3rd chapter
 
Went to start mine for the first time in about 6 weeks. I had to make some repairs to the electrical in that time as the external regulator harness was chaffed so I installed the solid state regulator and a new pigtail. Fixed the tail light wiring and painted the inside of the housings gloss white for some better light reflection and new lenses. Perfect let's start it...NOPE! Heavy fuel smell, leaking from a crap connection where PO had cut hard line at the pump and put in a piece of rubber hose to connect the two. OK got that done and new line ordered. Get home from work the next day to a puddle of fuel on the driveway from under the cab. Truck had two saddle tanks back in the day and removed before I got it. But the hard lines from them to the selector valve were still in it with the valve. In-cab tank was plumbed to the valve still and the rubber line from the tank to the selector valve hard line was rotted and leaking. Ripped it all out in 30 minutes and installed a new line with a metal canister filter between the tank and the hard line inside the frame. Just in time for a torrential downpour and two more days of work with rain...I just want to start it now and make sure I have all the fuel line good.

Of course rain still pervades here in NorCal (we need it bad though) and I discovered this truck had 5/16" fuel lines for the 350 from the factory so new hard lines and sender ordered to replace the old ones and hopefully prevent any starvation (has Edelbrock carb/intake on it). I'm going out on limb though and guessing the fuel pump will need replacing (Merry Christmas to me) since that's my luck. If I don't get it running as is, it will remain a driveway queen until after Christmas. I feel mission creep coming on as the radiator and heater core are also suspect, those hoses look really shady right now and it's pouring outside once again.

71CHEVYSHORTBED402 12-07-2018 08:14 PM

Re: What did you do to your truck today.The 3rd chapter
 
2 Attachment(s)
The painter sat on these a while, but some things are worth the wait.

Grumpy old man 12-07-2018 08:26 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by 71CHEVYSHORTBED402 (Post 8401015)
The painter sat on these a while, but some things are worth the wait. The picture doesn't do them justice.

Why didn't he fix that dent ?

Grumpy old man 12-07-2018 08:28 PM

Re: What did you do to your truck today.The 3rd chapter
 
Just kidding :bann:

They look great ! :chevy:

71CHEVYSHORTBED402 12-07-2018 11:57 PM

Re: What did you do to your truck today.The 3rd chapter
 
Quote:

Originally Posted by Grumpy old man (Post 8401025)
Why didn't he fix that dent ?

:lol:........Cuz there's another just like it on the other side?

beaterku 12-08-2018 12:35 AM

Re: What did you do to your truck today.The 3rd chapter
 
1 Attachment(s)
Installed this beauty today. It’s a shame if not really visible when the truck is all assembled.


All times are GMT -4. The time now is 03:02 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com