Re: 55-57 one piece windows
 

where is the part that we have to trim on post 61 is it just grinding down a little bit or do we have to cut it?

Re: 55-57 one piece windows
 

oh i almost forgot thanks for all this that you have done hopefully a lot of people watch it and learn from it.

Re: 55-57 one piece windows
 

the peice he circled is what needs to be cut off and threw away. look @ video number 3 @ 1:58 minutes. that is the peice that attaches the glass to the track on the regulator.

also, when your @ the glass shop make sure to pickup a couple feet of window tape. it is used to put the glass into the peice your reffering too.

Re: 55-57 one piece windows
 

o okay i get it now i was wondering where that went lol anyways would you happen to have any extra parts laying around for me to be able to complete my windows like the extra part that has to get welded where the wheels are. If you don't mind shipping it to me ill pay for it if you want.

Re: 55-57 one piece windows
 

I just watched all the videos and my questions were answered, good job. Did you say you were going to make a pdf file of the glass template? I assume the glass mounts in the same location on the track relative to the rear side of the door with the extra glass just hanging out the front end?

Re: 55-57 one piece windows
 

yessir & yessir

Re: 55-57 one piece windows
 

not sure if i have another track or not. ill try to remember to look

Re: 55-57 one piece windows
 

okay thanks man i glad i started the thread for the one piece windows haha its been benefiting to everyone.

Re: 55-57 one piece windows
 

They repop those if you look in lmc or classic. they call it - Door upper guide rail or door glass cam channel

Re: 55-57 one piece windows
 

Videos turned out great Brian. Thanks again for putting up with me. :lol:

Re: 55-57 one piece windows
 

Great job on the videos guys, i think i may want to do it to my project, Thanks.

Re: 55-57 one piece windows
 

thanks grimss ill look for it

Re: 55-57 one piece windows
 

One thing you might want to do is cover your glass with some shelf paper. It's low tack and peels off easy when your done. It will save you from any scraches.

Re: 55-57 one piece windows
 

where can you get that? I have started to rip everything out my door and noticed that the glass is actually two like glued together i founf that pretty interesting for the eng. of that time lol

Re: 55-57 one piece windows
 

Did you get my PM ?? I'm on board for this!!! Lemme know how to get all the goodies from you.

Re: 55-57 one piece windows
 

Grimss is going to up load the template in a PDF file so we don't have to mail it out because we have so many people wanting it. Plus for people in the future. This could go on for a long time, and could run in to problems down the road. he said he will get it done next week. If he can't, we will go back to the old way. Brian

If you want the chrome beads on the felts like grimss has, call up Fannin Auto Glass in Springfield, Mo @ 417-869-4096

the track that holds the glass in is Y630P-96. you will need two of these, in 8 foot sticks.

the felt sweepers are YM54R-96 HALF-GUIDE. these come in 8 foot sticks i think, but one isnt enough.

Re: 55-57 one piece windows
 

IC. Thanks again for being awesome.

Re: 55-57 one piece windows
 

Here is the company that makes the channel and door sweeps they have an order line might be cheaper to buy in bulk


http://www.stanpro.com/Product.aspx?...Id=%2075000194

http://www.stanpro.com/Product.aspx?ProductId=75000130

Re: 55-57 one piece windows
 

didnt check their prices, but im sure they will be better. the glass shop i used probably isnt set up for shipping this stuff. if you can go to a car show or swap meet you can pick the stuff up for 10-15 bucks a stick instead of 25-30.

Re: 55-57 one piece windows
 

about how long did it take for anyone to get their glass done and to them. Because i been going around and everyone keeps telling me two weeks or a little less for the temp glass. Did anyone use laminated glass?

Re: 55-57 one piece windows
 

2 weeks around here, is the norm. grandpa had laminated in his and broke them both over time, we had some tempered made for him, its alot harder to brake.

Re: 55-57 one piece windows
 

Tempered take longer because the glass has to be cut to size then tempered. If you are not in a large metro area it usually has to be shipped to a factory that has the oven to do it. Even though the Boise area has over 500,000 population all tempered glass for buildings has to go to SLC for tempering.

Re: 55-57 one piece windows
 

Both of you are right and i been shopping around to see who is the cheapest but i think i know what im going to do now and i think it is going to look good because im thinking toward the future haha. Thanks Guys.

Re: 55-57 one piece windows
 

Re: 55-57 one piece windows
 

I have the window template scanned and where you can print it out and put together. Need a place that I can upload the PDF files to. They are in a zip file and are 9 files. Any clues where to host them?

Re: 55-57 one piece windows
 

Have you tried uploading them using this site to host? the attachment window says it will handle a 100kb zip file. If you split it up it may work?

Ben

Re: 55-57 one piece windows
 

Send them to me and I will host them and post a link here

info(@)thoroco.com

Re: 55-57 one piece windows
 

TEAM EFFORT! I can't wait to do this mod.

Re: 55-57 one piece windows
 

It sounds like they are in pieces? If you can get a full size to me by mail, I can scan it on my big scanner and have files that someone could take to a blueprint store or kinkos and get printed on one sheet. I can scan max 42" wide x as long a paper is.

Re: 55-57 one piece windows
 

PM me your email and I'll send you the file. Not everyone will have places to go and have it printed on 20 x 28 paper, so I made it where anyone with an 8.5 x 11 printer could do it.

Re: 55-57 one piece windows
 

If you can do it in one file I would be glad to host that one as well.

Re: 55-57 one piece windows
 

I sent grim a PM. I will be out of town next week, so it should be in my mail when I get back. PM me with your email and when I get the drawing scanned I will email it to you.

Re: 55-57 one piece windows
 

Here is the link to the page.
http://www.thehollisterroadcompany.c...ecewindow.html

There is a Zip that contians the 9 files or you can download each file or one large format file that prints off on a plotter or other large format printer at Kinko's or Office depot.

I would reccomend that if you use the large format that you download the Print_me_first page along with the large format so you can verify the scale.
The Zip has the print_me_first in it.

Re: 55-57 one piece windows
 

Thanks, I just downloaded your zip file and then printed the files of my printer worked perfectly and your instructions are very easy to follow. Thanks again.

Re: 55-57 one piece windows
 

Main thing to do is make sure the scale is correct and line up the cross hairs.

Re: 55-57 one piece windows
 

Re: 55-57 one piece windows
 

cool, I downloaded it and don't have to do anything!! Thanks again guys.

Re: 55-57 one piece windows
 

Thank you, thank you, thank you!!!

Re: 55-57 one piece windows
 

I'm so happy I could cry!!!! But I won't cause ya know we all work on trucks and stuff and thats just not cool...

Re: 55-57 one piece windows
 

Thanks to all for your efforts, I do appreciate it sincerly