Re: Parting this 66
Jimmy,
Opened the carb package tonight and every thing is great, the linkage is perfect, just what I needed. May be interested in emergency brake parts that you have, if they are same for C and K trucks. thanks, Les |
Re: Parting this 66
Les what parts of it are you looking for and I will see what I have and try and cross the use for you.
Jimmy |
Re: Parting this 66
PG Signs,
I'm looking for a crank shaft for a 250 inline six. Got one? |
Re: Parting this 66
I have the complete 250 in the truck. If you were closer I would give you the motor. All you have to do is pull it.
Jimmy |
Re: Parting this 66
Quote:
|
Re: Parting this 66
wouldn't have an oil bath air cleaner for a L6 would ya?
|
Re: Parting this 66
Can't help on the air cleaner. I have sent a few text to folks looking for a good crank that is out.
Jimmy |
Re: Parting this 66
Whats the steering column like?
|
Re: Parting this 66
It came with two both in pieces, neither in that good a shape.
Jimmy |
Re: Parting this 66
Open to offers on any remaining parts.
Jimmy |
Re: Parting this 66
Do you still have the rear axle? Would you ship it? 53534
|
Re: Parting this 66
I have it but think the freight would be more than the cost of the rear. Should be something a lot closer.
Jimmy |
Re: Parting this 66
What about the wheels? :D
|
Re: Parting this 66
I need to hit them with the pressure washer and check them. They look good as far as the inner section and bead. No rust at all. Just want to make sure the entire wheel looks good before I sell them.
Jimmy |
Re: Parting this 66
Quote:
|
Re: Parting this 66
Quote:
http://67-72chevytrucks.com/vboard/s...1&postcount=13 |
Re: Parting this 66
jdl71 when I get them cleaned up I will post them here and give you first shot.
Jimmy |
Re: Parting this 66
Quote:
|
Re: Parting this 66
No worries. Shipping will likely be a deal breaker for me anyway, but I'd like to know for sure.
|
Re: Parting this 66
Quote:
|
Re: Parting this 66
Jimmy,
What size are the wheels? 15s or 16s? Did not see size noted above. If 16s interested if others pass. I can have them picked up at your place. Les |
Re: Parting this 66
I am not interested if they are 16's. Guess I should have asked that also, just assumed.
|
Re: Parting this 66
Going to clean them up Saturday morning and post them. They are 15's. Those who asked about them get first shot in the order they asked.
Jimmy |
Re: Parting this 66
I need some heater parts off of the engine side of the firewall if still available
|
Re: Parting this 66
What do you need and I will look to see if I have it.
Jimmy |
Re: Parting this 66
Need the top cover for the main body of outer heater
|
Re: Parting this 66
I have one. Do you just need the metal cover or everything from the main body up?
I have both pieces for a deluxe heater or the thrift heater. Jimmy |
Re: Parting this 66
Need everything from the main body up, Not sure which heater I have but I believe it is a deluxe model. Can you post pics? Thanks
|
Re: Parting this 66
Easy way to tell what top section you need is to see if there is a cable attached to a lever right at the fire wall. It opens and closes a flap for the air from the cowl panel.
I'll work on pics. Jimmy |
Re: Parting this 66
3 Attachment(s)
As promised here are the wheels. I washed off the dirt with nothing but water to inspect them and they look pretty good. The inside and bead surfaces are really nice and a good bit of the original paint is still on them. I think they would clean up more with a little soap. All the lug nut seats look good. They are 15X51/2. Asking $200 for the set of 5 plus what ever it takes to get them to you.
Jimmy |
Re: Parting this 66
2 Attachment(s)
Here are a couple of heater pics.
Jimmy |
Re: Parting this 66
Quote:
Thanks, Nicky |
Re: Parting this 66
Quote:
|
Re: Parting this 66
That's what I need. If you have those pieces,lid and top section that is. I will take them, Let me know how much and how you would like to be paid.
|
Re: Parting this 66
Do you have the three levers on the dash for the heater? This will determine what top you need.
Jimmy |
Re: Parting this 66
My heater control has three levers
|
Re: Parting this 66
You need the one in the first picture. $25 with the sheet metal cover plus the shipping.
Jimmy |
Re: Parting this 66
I will take it. Send me payment info and prefered method.
|
Re: Parting this 66
Zeusflash PM me your address and I will get you a total with shipping.
Jimmy |
Re: Parting this 66
Hello Im looking for the upper rad support/mounting bracket for a V8 engine...... do you have this part and a picture if you could
Thanks Craig |
All times are GMT -4. The time now is 03:30 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com