Re: 61 Ford unibody project
1 Attachment(s)
Got the front back together greased ready for the motor.( motor still at te machine shop)
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Got the c4 trans back form a rebuild.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Another pic
Jake |
Re: 61 Ford unibody project
Hey Jake! I've been following your build over on the HAMB. Always too scared to comment on that forum... Looking forward to seeing this truck finished up. The 60s f100s are really growing on me.
|
Re: 61 Ford unibody project
Quote:
Yea the truck is too OT to keep adding to the tread there now so since I really like the builds and builders on this board I will keep up dating here since I have not found a good Ford site. They seam to be popping up now and since porter built has a drop member for them and Delmo is building one up also maybe there will be more intrest in them. Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Did some body work still needs more lol but making some headway.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Rear end is coming out next for a rebuild ect.Picked up a chrome diff cover and drilled and slotted stock replacement disk for it and a master rebuild kit .
Jake |
Re: 61 Ford unibody project
Quote:
Looking forward to the rest of the build. It looks so sweet laid out, and the new wheels were a perfect choice. |
Re: 61 Ford unibody project
Looks great Jake! My first complete paint job was on a '62 uni in that same color. Digging this one for sure.
|
Re: 61 Ford unibody project
Thanks guys.
The color is Caribbean teal :lol: Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Got the rear out and started taking it apart.Sorry of the mess ha.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Did a bit of body work to the other side also.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Outside pic.
Jake |
Re: 61 Ford unibody project
Man it's looking straight. Makin me jealous Jake!
|
Re: 61 Ford unibody project
1 Attachment(s)
Thanks man.
Got the 8.8 posi 373 rear done. Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Got the rear back under the truck.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
It's nice to put it back together and move forward on stuff.
Jake |
Re: 61 Ford unibody project
Looking good
|
Re: 61 Ford unibody project
1 Attachment(s)
Quote:
Jake |
Re: 61 Ford unibody project
Looks great. I dig these unibodies even if they are a ford.
|
Re: 61 Ford unibody project
Quote:
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Got my new flat caps from Dashmans Hot Rods the fit and finish is perfect.I hated the cheap chrome stock caps.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Pic of the front cap it's machined in the center for the dust cap on the rotor also.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Put the font clip back on so I can do some body work on it.Also sanding grinding ect the floor in the cab so I can put bed liner on it.
Jake |
Re: 61 Ford unibody project
Oh Yeah!!! Looking so SICK :metal: :metal: :metal: :metal:
|
Re: 61 Ford unibody project
Thank you all your projects are out of control with a ton of nice workman ship.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
So sand grind repeat repeat repeat ect.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Then tried my hand at herculiner.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
High hump trans tunnel painted up.
Jake |
Re: 61 Ford unibody project
Looks great!
|
Re: 61 Ford unibody project
Quote:
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Moved my break pedal down 2 inches and back toward the fire wall one inch.
Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Painted with oval vintage style pedal.I have a round one also but think I like the oval one better.
Jake |
Re: 61 Ford unibody project
Nice work. Looks super clean now.
|
Re: 61 Ford unibody project
1 Attachment(s)
Quote:
Got my spoon pedal in Jake |
Re: 61 Ford unibody project
1 Attachment(s)
Pic looking in.
Jake |
Re: 61 Ford unibody project
Wow looks really clean
|
Re: 61 Ford unibody project
1 Attachment(s)
Quote:
I have a 16 in Lokar shifter for it only pic I have of it in. Jake |
Re: 61 Ford unibody project
Nice lookin' truck, and good lookin' work!
|
Re: 61 Ford unibody project
Quote:
Jake |
All times are GMT -4. The time now is 12:08 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com