Re: Lets see your seat swaps....
 

Here are 2 I have of mine:
http://imagizer.imageshack.us/v2/800...912/FgGdrc.jpg

http://imagizer.imageshack.us/v2/800...538/fUu5Me.jpg

Re: Lets see your seat swaps....
 

These are the same width as a stock bench.

These are the new seat sitting on an old bench frame. The seats are actually pushed tight together in this pic so once mounted and proper gap between the seats adjusted they were a little wider than what this shows.

http://i9.photobucket.com/albums/a59...psb9bf4708.jpg

http://i9.photobucket.com/albums/a59...ps34a92604.jpg

Re: Lets see your seat swaps....
 

I check with the guy in Arizona you bought those seats from, he charges $220 to ship. GAH!

Re: Lets see your seat swaps....
 

[QUOTE=carboncrew;6904553]These are 2nd row seats from a honda odyssey ('take outs' from handicap conversion vans). Cheap, new and matched the 91 chevy light gray perfect led me to this decision.

These are the brackets I had to make:

http://i9.photobucket.com/albums/a59...nCrew/0040.jpg

Once again very clean truck , Im not into aftermarket seating,,,, though you nailed it, and that truck all aroud, with your burb upgraded burlwood interior, mirrors. and of course black, that pick-up would fit in at my house.

Re: Lets see your seat swaps....
 

Ouch! That pretty much takes away the cheap part. I think he's selling them for a lot more nowadays too.

I could maybe carry a set halfway (oklahoma) when I visit my sis this spring, if that helps.

Re: Lets see your seat swaps....
 

I appreciate the offer, I'll probably stick with my buckets for a while though. I have to use them for my center console that holds the tablet and camera system.

Re: Lets see your seat swaps....
 

I did pretty much the same thing 86jimmy4x4 did with his seats, except i threw in a center jump seat from a 2003 pickup that I got from Ebay. Everything bolted in. No cutting and welding involved. I slid the center jump seat front brackets underneath the bucket seat brackets, and drilled the inside mounting holes through the floor, and got creative with some clamp style bracket for the back of the center jump seat. All in all it took me about 4 hours to do everything by my self. Went from factory torn up bench and red carpet to black carpet from LMC, Procar bucket seats and adapter brackets, purchased from summitracing. I think it turned out all right. The seats aren't sitting too high, and the steering wheel can be used inline with the steering column. I don't have to tilt it up more than center with the column.

Re: Lets see your seat swaps....
 

I just got bucket seats and rails from a 75 k5 blazer will the bolt right in a 1973 c10 or do I need different brackets

Re: Lets see your seat swaps....
 

Trying to get them in my 1973 Cheyenne super short bed.

Re: Lets see your seat swaps....
 

I'm looking for some manual bucket seats. Straight swap replacements for a 89 GMC suburban....anyone have any ideas????