Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

both

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

PM sent

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

e-brake cable from cab to rear loop 12.50
e-brake cable rear loop with three supports and couplers 15.00
if it will work on a 67
shipping to 77505

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'll take the shift linkage. I'll send paypal in the morning.
Thanks!
Posted via Mobile Device

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

The cable from the cab to the frame is 67-68 and 69-72. 67 and 68 have a hand opperated e-brake and 69-up it is a foot type. Sorry

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Paypal sent for the shift linkage!

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Just checking back on inside wiring and TH350 kickdown cable. Sharpie

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'll take that rear most crossmember in the pic. How about $25 + shipping to 32669?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Paypal payment sent
Thanks, Cisco

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

If still aval I need the factory exhaust hangers.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

The only part of the hangers that is any good is the riveted bracket to the frame. Is that what you need?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I need the clamp that goes around the steering column and clamps it to the firewall bracket in the engine compartment. Should be a 3-piece assembly; strap, bolt, nut.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

bollybib: 4.00 for clamp bolt nut washer 4.95 shipping usps. Anything else you need to soften the shipping cost?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I have already met you in the middle at 30.00, It has to be worth that to cut it out. I will acid dip it for free and ship it to you rust FREE!

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I would like to buy the rear view mirror.

Is mgkgmc going to commit to buying ALL the interior parts like he said he would if it was a Gold interior, which it is, or how long do we have to wait for him ??? He's laying clam to the mirror.

You've answered his questions prior to posting the SPID picture and he still wouldn't commit to buying it.
You posted the SPID picture and we yet to hear back from him. It's been almost day and a half now.

If you can put me down for the mirror I would also like to buy:
Fuel line to carb
Oil Pressure line
Headlight switch with knob
Cigar lighter
alternator brackets
double groove water pump pulley
How much for the SPID itself?
How much for the instrument face plate only? It ain't pretty I know, but if it's cheap enough maybe I can use it.

Thanks.
P.S. That heater stove box sure looks purdy.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

roger0080: All the listed parts are yours. Spid free with the purchase and 15.00 for the face plate. As for the interior parts I have asked for advice from a moderator. We all get busy from day to day and strugle finding time to deal with everything. But on the other hand business is business. I do need to sell this stuff and move on. I will put you in first place pending the reponse from the board gods. Thanks, Tom

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Yes thats what I need, I have the rear mounted ones I need the farward mounted ones

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Interested in booster, master cylinder, and prop valve. Will you go $75.00 shipped? My zip is 98045.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

lol

I'm negotiating with several different people for one. I will definitely pay $30 + shipping if you dip it!

What do I do?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

how much for the throttle pedal and assembley shipped to 37184?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Okay, I'll buy the faceplate too if you can get an answer on the mirror. I'll wait a couple more days for an answer back. -Roger

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I will take the wiring harness. Sorry i pm'd you instaed of posting in the thread. Did you end up selling the vent windows? Also you mentioned you will have parts at the Canby swap meet. are you still going to be there?

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

As promised I'll let butternut have first shot. I'm out on any other parts. Good luck with the rest of your sales. Sharpie

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

OK $8.95 total sounds good to me. That's all I really need at the moment, mine is broken. I see ppl paying for stuff here using paypal. I have paypal acct or I can send you a classic check.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Ill take the belts,visors and the armrests . What shape are the armrests and do you still have the heater vents on the top of the dash and what shape are they and color? I didnt mean to take so long on the reply I works nights. thanks

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Are the following parts still available:

COMPLETE shifter linkage?
Vacuum line from trans to carb?
Fitting on intake manifold to attach the vacuum line?

I had asked about the slip yoke but I will pass on that. Thanks.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

bollybib: Paypal would be best PM sent with info.

sharpie72: your a good sport, thanks

butternut72: the underdash wiring is yours pending payment.

roger0080: You are down for the following:

rear view mirror
speedo face plate
Fuel line to carb
Oil Pressure line
Headlight switch with knob
Cigar lighter
alternator brackets
double groove water pump pulley
How much for the SPID itself? free with your purchase

skeeterbug: 8.85 via ups

Solego: rear cross member 30.00 shipping 16.54 and dip it for FREE.

breeh: shipping would be 17.14 how about 85.00 shipped?

burb71: 17.50 shipped for a pair.

mgkgmc: Your down for belts visors and armrest. One armrest is nice the other appears to be sun burnt as the pics show. They are priced accordingly. The vent on the LH is fine, the RH looks to be slightly warped 7.50 and 4.00. The color is a medium/dark brown. I'm color blind too. I'm sure they are correct for the truck.


If I have missed anybody please let me know. Thanks, Tom

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Hey Tom, just posted a few questions about 10 minutes prior to your last post. Don't know if you seen it or not.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Do the upper bed moldings use the factory metal clips? If so, I would like to buy all the upper bed molding clips.
Let me know,
Casey

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Payment Sent...Thanks Dave

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

sjarrett71: Yes I missed it. It took me a bit to put that post all together (one letter at a time).
the shift linkage is sold.
the fitting and vac line is up for grabs. 3.00 extra for the factory fitting.

superchevy: this truck did not have the upper molding, sorry

Davedr: thank you

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I'll take the pair of exhuast brackets at 17.50 shipped
Just PM me

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Thanks for the offer but no, $75.00 total cost is already a stretch for me on that piece.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

PM me payment total with shipping to Rolla, MO 65401 and how you want paid please. Thanks.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Ok..you win! I'll do it for 75.00 shipped. Let me know if your still interested.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

I appreciate you meeting my offer. However, I went back and looked through the thread again and noticed that you said that the master cylinder was bad. Also, it appears to be 3/4 booster but maybe that is just the angle of the picture.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

It is a dual diapham booster. Not sure if this the original type to the truck. The prior owner had mentioned that he replaced it recently so it may be off a 3/4t.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Thanks but I am looking for a 1/2 ton style. I already have a 3/4 ton setup.

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

PM sent

Re: Parting out 1970 GMC C10 350,TH350, 3.73
 

Payment sent. Thanks.