Re: Dynatech MuscleMaxx Headers
 

I put some 98-02 e-bay stainless f-body headers on a square body with 1" setback plates and had no prob on the driver side.

Re: Dynatech MuscleMaxx Headers
 

man i have dirty dingo mounts and mine in probably the middle of the slider were like 2 inches away from tranny mine are set almost all the way back and my motor is about 3/4in off the firewall and i can't use the ac unit by any means but i didn't like its dumb lower mount anyways where do yours sit at in the sliders?

Re: Dynatech MuscleMaxx Headers
 

Do you have any pics?

My mounts are pretty close to stock bc I kept my trans in the same spot so I can re-use my current driveshaft.

Re: Dynatech MuscleMaxx Headers
 

Hmmm, just wondering if they make the same layout just with smaller primaries... Id like to keep them in the 1 5/8-1 3/4" range.

Re: Dynatech MuscleMaxx Headers
 

so is there a verdict on this??

Re: Dynatech MuscleMaxx Headers
 

All i have for a computer is a kindle fire so i have no way of uploading pics. I might be getting a free desktop this weekend and if i do i will try to get some pics Of the headers on.

Re: Dynatech MuscleMaxx Headers
 

I'm askin if the dynotech headers (70-81 camaro) fit on a c10????....and if so do they hang below the frame???

Re: Dynatech MuscleMaxx Headers
 

I got my 5.3 dropped in to mock up motor mounts and check header figment. Had to pull my stands just forward of the v8 holes and the headers literally slid right in.

Re: Dynatech MuscleMaxx Headers
 

.....and there not hangin below the frame right???

Re: Dynatech MuscleMaxx Headers
 

mooseknuckles,

I think they hang below if you running a stock crossmember. I've got a PB crossmember and also raised the trans crossmember and I clear well.

Re: Dynatech MuscleMaxx Headers
 

well...I got a stock crossmember, but I'm also "Z" 3".....so I guess I'm going to find out if they fit soon enough....

Re: Dynatech MuscleMaxx Headers
 

I have a stock crosmember so yes the hang down identical to 68gmccustom's pics.

Re: Dynatech MuscleMaxx Headers
 

headers are here....

Re: Dynatech MuscleMaxx Headers
 

Make sure you got metric header bolts. Mine came with sae. I called dynatech and they promptly sent new hardware.

Re: Dynatech MuscleMaxx Headers
 

yep...came with m8x 25mm...

Re: Dynatech MuscleMaxx Headers
 

When you putting them on?
Posted via Mobile Device

Re: Dynatech MuscleMaxx Headers
 

it's gonna be a little while yet..

Re: Dynatech MuscleMaxx Headers
 

[QUOTE=mooseknuckles;5221879]it's gonna be a little while yet..[/QUOT

These are the 70-81 Camaro versions?? thanx...........jim

Re: Dynatech MuscleMaxx Headers
 

[quote=jtp67-72;5221933]yep...70-81 camaro...3" collector

Re: Dynatech MuscleMaxx Headers
 

pn# 715-29410

Re: Dynatech MuscleMaxx Headers
 

dynatech's bolted up....

Re: Dynatech MuscleMaxx Headers
 

few more...

Re: Dynatech MuscleMaxx Headers
 

and more....

Re: Dynatech MuscleMaxx Headers
 

Thanx for p/n---U still think with dropmember these will clear bottom of frame?? They look great .................jim

Re: Dynatech MuscleMaxx Headers
 

I dont have a dropmember....lol...but I hope they clear my "Z'd" frame!

Re: Dynatech MuscleMaxx Headers
 

Wow!! what did you do to your frame, you don't have any clearance issues at all.:lol:

They look like they will work better than the f-body ones I tried. I believe it was the #1 or #3 primary that kinda went forward and straight down and hit the a-arm. It wasn't going to work at all w/o modding the headers.

Re: Dynatech MuscleMaxx Headers
 

What pan are you running?

Re: Dynatech MuscleMaxx Headers
 

gmpp muscle car pan kit pn#19212593

Re: Dynatech MuscleMaxx Headers
 

makes me feel good about keeping my LY6 pan...I was thinking I might need to get a different one that didn't hang down as low....looks about the same?

http://www.lsxtrucks.com/gallery/alb...l_IMG_1506.jpg

http://www.lsxtrucks.com/gallery/alb...l_IMG_1503.jpg

Re: Dynatech MuscleMaxx Headers
 

the gmpp pan is a good 1 1/2" shallower than my original truck pan...