The 1947 - Present Chevrolet & GMC Truck Message Board Network - 69 Camaro front valance and spoiler on a 67 c10?

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)

- - 69 Camaro front valance and spoiler on a 67 c10? (https://67-72chevytrucks.com/vboard/showthread.php?t=650024)

Re: 69 Camaro front valance and spoiler on a 67 c10?

Quote:

Originally Posted by Robznob11 (Post 8861348)

I have seen it but im not a fan. To mee it looks to much like an add on. I would say it sticks more to the truck lines and look. That may be what some would perfer but i wanted more Camaro look. I think if they took the design and set it back and gave it a reveal it would read much more Camaro. Lol but thats just me. Everyone has their own flavor. I have had plenty of purists hang me up for what i did. And to be honest I would like to clean up my front end some. I would say i did a 8 out of 10 on the fab. I know for a fact i can do it better. But its in paint now so im gonna call it good. If my wife ever gives me the chance I would like to do another one with RS style doors. I have better tools now😈

I agree it looks cheezey to me. Although it's all American made. You have to remember though it works with a stock radiator support in place so you are very limited on space.
I would how ever want to see it in person on a truck not a display though to make any more comments on it.:chevy:

Re: 69 Camaro front valance and spoiler on a 67 c10?

I have 60-72 C10 front spoilers, roll pans with center air duct and turn signals, and pro touring front bumpers available at my website vannattafabrication.com. http://67-72chevytrucks.com/vboard/a...1&d=1626413272

Re: 69 Camaro front valance and spoiler on a 67 c10?

midwest customs,
Super looking! Not going that direction on my build but those front ends are fantastic. Not over done, not cheesy, just enough different to catch the eye. Fantastic.

Re: 69 Camaro front valance and spoiler on a 67 c10?

I mounted a Front Air Dam from a mid 90s Chevy truck on mine,
I run with the suspension at Stock height, and wanted to fill in some of the space.
It’s about 4 inch top to bottom an pretty much goes from wheel well to wheel well.
I remember having to modify it a little on each side with some relief cuts and bracing in order for it to follow the body lines.
It’s raining right now, y’all are going to have to wait till morning for a current picture, but I will take some and post em.

Re: 69 Camaro front valance and spoiler on a 67 c10?

Here’s mine. It’s off a mid-90s Chevy Silverado (?)
I looked a long time for one that wasn’t torn up, and to a lot of measurements to make sure it would fit.
I did have to make some relief cuts and braces on the ends to make it line up with the bottom of the wheel wells, and then I fabricated two mounting bracket so it would line up with the frame.
In the future I plan to reshape the lower ends so there’s not that squared off edge, but that’s down the road.
Sorry for the sideways pic, I’m sending it from my iPad

Re: 69 Camaro front valance and spoiler on a 67 c10?

It has been done. I really like it.

Re: 69 Camaro front valance and spoiler on a 67 c10?

I had that setup on my '69 RS Camaro. 'nother vehicle I shouldn't have sold off. :lol:

Re: 69 Camaro front valance and spoiler on a 67 c10?

Quote:

Originally Posted by midwest customs (Post 8945839)

Bad ass.. I have a 67 coming together now. I may be in touch soon.