The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 6

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - OR 67-72 cross members (https://67-72chevytrucks.com/vboard/showthread.php?t=683069)

DLTruck1973

11-19-2015 12:13 PM

Re: 67-72 cross members

Quote:

Originally Posted by Grumpy old man (Post 7380885)

HI, I'm looking for a '67 short bed manual trans cross member .and the rear most frame cross member with light wiring hole shipped to 37820 the ones I have are bent and pitted . :chevy:

Manual trans cross member for a V8 truck 2wd?

Let me know. I have them for a V8.

Thank you,
Thomas

DLTruck1973

11-19-2015 12:15 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7381462)

Shipped to 93001

Coil spring shock cross member for a 2wd pick up, I have it. I do not have the upper spring plates at this time.

Give me some time and I will get you a quote. Very busy now.

Thank you,
Thomas

Grumpy old man

11-19-2015 02:27 PM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7381547)

Manual trans cross member for a V8 truck 2wd?

Let me know. I have them for a V8.

Thank you,
Thomas

1967 250 ci 2wd 3 speed manual trans cross member with the stock bell housing mounts :chevy:

DLTruck1973

11-19-2015 03:10 PM

Re: 67-72 cross members

Quote:

Originally Posted by Grumpy old man (Post 7381694)

1967 250 ci 2wd 3 speed manual trans cross member with the stock bell housing mounts :chevy:

Sorry, nothing for a 6 at this time. They are different than a V8 because of position in the frame rails.

Thank you,
Thomas

DLTruck1973

11-19-2015 03:39 PM

Re: 67-72 cross members

Quote:

Originally Posted by Grumpy old man (Post 7381694)

1967 250 ci 2wd 3 speed manual trans cross member with the stock bell housing mounts :chevy:

Can you post a picture of the rear tail light harness cross member from the top view. There are two different styles of these cross members. One has staggered rivet holes and one has straight6 across rivet holes. I need to know to get you the correct part. I have both.

Thank you,
Thomas

WarMonger

11-19-2015 05:42 PM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7381549)

Coil spring shock cross member for a 2wd pick up, I have it. I do not have the upper spring plates at this time.

Give me some time and I will get you a quote. Very busy now.

Thank you,
Thomas

How much for the coil spring shock cross member shipped to 93001?

BigMike

11-20-2015 04:56 AM

Re: 67-72 cross members

No you didn't read it wrong. I need the cross sills

Thanks anyways

Quote:

Originally Posted by DLTruck1973 (Post 7381545)

Are you talking about the brackets that rivet to the frame? If so, those are the same on a steel floor. It would be the cross sills that you need for the conversion. I do not have any cross sills for a wood floor at this time.

Let me know if I am not understanding your request.

Thank you,
Thomas

WarMonger

11-23-2015 02:15 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7381884)

How much for the coil spring shock cross member shipped to 93001?

Anything on this yet? thanks

DLTruck1973

11-23-2015 04:36 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7386002)

Anything on this yet? thanks

$65.00 shipped to your door.

Let me know and I will PM you payment information if needed.

Sorry for the delay,

Thomas

WarMonger

11-23-2015 04:42 PM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7386230)

$65.00 shipped to your door.

Let me know and I will PM you payment information if needed.

Sorry for the delay,

Thomas

Sounds good. Lets do it.

DLTruck1973

11-23-2015 05:07 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7386240)

Sounds good. Lets do it.

PM on the way,

Thank you,
Thomas

WarMonger

11-23-2015 06:09 PM

Re: 67-72 cross members

Thanks Thomas, you are the best.

DLTruck1973

11-23-2015 06:44 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7386345)

Thanks Thomas, you are the best.

Glad to help. Let me know if you need anything else. Upper spring plates are hard to find nice but I do get them from time to time.

Thank you again,
Thomas

WarMonger

11-27-2015 02:15 AM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7386373)

Glad to help. Let me know if you need anything else. Upper spring plates are hard to find nice but I do get them from time to time.

Thank you again,
Thomas

received my Crossmember yesterday. Looks great and super fast shipping. Let me know if you get more upper spring plates. I need a set.

Thanks

DLTruck1973

11-30-2015 12:30 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7390301)

received my Crossmember yesterday. Looks great and super fast shipping. Let me know if you get more upper spring plates. I need a set.

Thanks

Glad to hear. I will post upper spring plates when they become available. They are a hot item and hard to get in nice shape.

Thank you,
Thomas

WarMonger

12-09-2015 01:54 PM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7393740)

Glad to hear. I will post upper spring plates when they become available. They are a hot item and hard to get in nice shape.

Thank you,
Thomas

Any upper spring plates show up yet?

Thanks

DLTruck1973

12-09-2015 02:04 PM

Re: 67-72 cross members

Quote:

Originally Posted by WarMonger (Post 7404084)

Any upper spring plates show up yet?

Thanks

No sir. It will be some time before I have another set. That is not a guarantee that they will be good ones when I do get a truck with them to part.

I will keep you posted if anything changes.

Thank you,
Thomas

givememytoys

12-10-2015 12:26 AM

Re: 67-72 cross members

Do you have a rear motor/trans cross member for a 1970 c10 to mount a SM465?

DLTruck1973

12-10-2015 01:48 PM

Re: 67-72 cross members

Quote:

Originally Posted by givememytoys (Post 7404751)

Do you have a rear motor/trans cross member for a 1970 c10 to mount a SM465?

What you are looking for is the trans cross member that runs under the bell housing and has 2 mounts that bolt to the bell housing. I have one for a V8 manual trans.

Price is $40.00 plus the shipping. I will need your zip code for a ship quote.

Thank you,
Thomas

givememytoys

12-10-2015 11:33 PM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7405220)

I have a 292 six are the 6/8 the same?

STONEYDAROGE

12-11-2015 12:19 AM

Re: 67-72 cross members

Very. Rear crossmember for wiring harness also 71 rear driver cab mount to 44460 thanks

DLTruck1973

12-11-2015 12:11 PM

Re: 67-72 cross members

Quote:

Originally Posted by givememytoys (Post 7405828)

I have a 292 six are the 6/8 the same?

No sir. The 6 cyl is a different cross member because of where it mounts in the frame.

I am sorry but I do not have one for a 6cyl at this time. They are a little harder to come by.

Thank you for the interest,
Thomas

DLTruck1973

12-11-2015 12:13 PM

Re: 67-72 cross members

Quote:

Originally Posted by STONEYDAROGE (Post 7405896)

Very. Rear crossmember for wiring harness also 71 rear driver cab mount to 44460 thanks

When you say "cab mount" are you talking about the bracket that rivets to the frame that holds the mount or the mount it self?

Let me know on that and I will get you prices.

Thank you,
Thomas

northstar400

12-12-2015 10:36 PM

Re: 67-72 cross members

I am interested in a engine cross member with towers for a 69 4X4-350 with 4 speed transmission, shipped to 78674. Thanks

STONEYDAROGE

12-13-2015 11:12 AM

Re: 67-72 cross members

the bracket that that goes on frame is what i need.i found a crossmember local so bracket is all i need to 44460 thanks.

luckysmoke

12-14-2015 11:31 AM

I'm looking for a crossmember and engine stands for a 70 Chevy K10 V8 shipped to 82009. Thanks! Jeff
Posted via Mobile Device

DLTruck1973

12-14-2015 06:15 PM

Re: 67-72 cross members

I currently am out of 4x4 engine stands. I do have one cross member with bad stands for $40.00 plus shipping.

I will let all interested parties know when there is some more inventory.

Thank you,
Thomas

DLTruck1973

12-14-2015 06:18 PM

Re: 67-72 cross members

Quote:

Originally Posted by STONEYDAROGE (Post 7408560)

the bracket that that goes on frame is what i need.i found a crossmember local so bracket is all i need to 44460 thanks.

Sorry but I am not sure which bracket or cross member you are refereeing to. Can you clarify and I will get back to you.

Thank you,
Thomas

luckysmoke

12-14-2015 07:51 PM

Quote:

Originally Posted by DLTruck1973 (Post 7410326)

Hi Thomas, how much would this be shipped to me at 82009? Thanks, Nona
Posted via Mobile Device

DLTruck1973

12-14-2015 09:07 PM

Re: 67-72 cross members

Quote:

Originally Posted by luckysmoke (Post 7410438)

Hi Thomas, how much would this be shipped to me at 82009? Thanks, Nona
Posted via Mobile Device

I can let you know tomorrow if that works.

Thank you,
Thomas

luckysmoke

12-15-2015 12:20 AM

Re: 67-72 cross members

That will work! Thanks! Nona

DaHos

12-15-2015 10:14 AM

Re: 67-72 cross members

In need of a drivers side front bed mount plate for a 3/4T 4wd......Should be 4" wide.....2wd is to narrow and the blazer is too wide........

DLTruck1973

12-15-2015 12:07 PM

Re: 67-72 cross members

Quote:

Originally Posted by DaHos (Post 7411073)

In need of a drivers side front bed mount plate for a 3/4T 4wd......Should be 4" wide.....2wd is to narrow and the blazer is too wide........

Do you have a photo of one Dave? I should have it. From the cab going back, what position is it. From your description I am thinking the 3rd. Rivets to the top of the frame rail, yes?

Let me know.

Thomas

DaHos

12-15-2015 01:15 PM

Re: 67-72 cross members

1 Attachment(s)

Quote:

Originally Posted by DLTruck1973 (Post 7411207)

Correct. 2 cross sill stands then the plate.

DLTruck1973

12-15-2015 02:30 PM

Re: 67-72 cross members

2 Attachment(s)

Quote:

Originally Posted by DaHos (Post 7411268)

Correct. 2 cross sill stands then the plate.

Here you go Dave. I compared to a 71 K20. Looks to be the correct one for you. Minor pitting but very usable piece.

We need $22.00 to ship it to your door.

How is the business going there?

Let me know.

Thank you,
Thomas

basswood

12-15-2015 04:13 PM

Re: 67-72 cross members

do you have any upper rear shock mount rear crossmembers? if so shipped to 57201

DLTruck1973

12-15-2015 05:41 PM

Re: 67-72 cross members

Quote:

Originally Posted by basswood (Post 7411457)

do you have any upper rear shock mount rear crossmembers? if so shipped to 57201

If you are looking for a C10 rear shock cross member for coil springs, I am fresh out of them at this time. They sell very fast when I have them.

Keep me in mind for other parts.

Thank you,
Thomas

bodonaldson

12-15-2015 09:50 PM

Re: 67-72 cross members

69 2wd 350 auto how much cross member sent to 30458 thanks

DaHos

12-16-2015 10:46 AM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7411348)

Ill take it ! PM me info please.......

luckysmoke

12-16-2015 11:47 AM

Re: 67-72 cross members

Quote:

Originally Posted by DLTruck1973 (Post 7410554)

I can let you know tomorrow if that works.

Thank you,
Thomas

Hi Thomas,

I was wondering if you were able to get a quote for this yet?

Thanks,

Nona

All times are GMT -4. The time now is 08:52 PM.

Page 3 of 6

Show 40 post(s) from this thread on one page