The 1947 - Present Chevrolet & GMC Truck Message Board Network

Page 3 of 5

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)

- - 66' c60 Parts for sale (https://67-72chevytrucks.com/vboard/showthread.php?t=693992)

sharkskinman

01-23-2016 01:14 PM

Re: 66' c60 Parts for sale

Whitish Plastic grommet and screw on glove box door
Passenger visor
Choke knob
Brake,clutch,gas rubber
???

Didn't get cluster out?

richard2717

01-23-2016 06:25 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by sharkskinman (Post 7458097)

Whitish Plastic grommet and screw on glove box door
Passenger visor
Choke knob
Brake,clutch,gas rubber
???

Didn't get cluster out?

Sorry none of the above.

Richard

richard2717

01-25-2016 07:02 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by PGSigns (Post 7457367)

That works. Will do the paypal.
Jimmy

USPS tracking # sent

richard2717

01-26-2016 08:49 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by scuderia (Post 7451773)

sorry, didn't see this post. looks like this is the right setup. the two flat bar mounts go to the waterpump? and then there's another for the alternator that mounts to the exhaust?
If so I'll take the brackets.
Don

Don,
Looks like the package showed up today. Let me know if everything arrived ok.

Richard

scuderia

01-26-2016 09:17 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7462810)

Don,
Looks like the package showed up today. Let me know if everything arrived ok.

Richard

sure did! Thanks for the presents as well!!!

richard2717

01-28-2016 06:26 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by scuderia (Post 7462841)

sure did! Thanks for the presents as well!!!

no problem I got about 20k of them left so I use them for packing. :haha:

Mikecc6

01-30-2016 12:23 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7451933)

Mike
I am on the eastern shore in Salisbury. I do have a job in Silver springs one day this week but would only be there for an hour or two installing a promotional package. Looks like about $8 to ship UPS to 21157 zip, Probably cost you more in time and aggravation trying to meet up. Let me know.

Thanks
Richard

Richard

Would you take $30 for the cab clearance lights shipped to 21157? If so, pm payment instructions to me.

Thanks
Mike

richard2717

01-31-2016 08:09 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by Mikecc6 (Post 7466991)

Richard

Would you take $30 for the cab clearance lights shipped to 21157? If so, pm payment instructions to me.

Thanks
Mike

Mike
I will do that. Pm on the way

Richard

luvmytruck

02-01-2016 02:05 AM

Re: 66' c60 Parts for sale

Do you still have the master cylinder? how much? thanks

luvmytruck

02-01-2016 02:35 AM

Re: 66' c60 Parts for sale

how about a price on the right wing window assy.?

Mikecc6

02-01-2016 05:29 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7467969)

Mike
I will do that. Pm on the way

Richard

Richard

I have not received a PM, just checking.

Thanks
Mike

richard2717

02-01-2016 05:33 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by Mikecc6 (Post 7469773)

Richard

I have not received a PM, just checking.

Thanks
Mike

Hmmm strange. 1st time I have tried it from my phone and it is not in my sent box either. I am on the office computer now and will resend now.

Thanks for letting me know.

Richard

richard2717

02-01-2016 08:02 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7469778)

Hmmm strange. 1st time I have tried it from my phone and it is not in my sent box either. I am on the office computer now and will resend now.

Thanks for letting me know.

Richard

Got your payment. Will send lights out tomorrow.

Thanks
Richard

richard2717

02-01-2016 08:04 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by luvmytruck (Post 7469161)

Do you still have the master cylinder? how much? thanks

I did not take the master cylinder off because the brake pedal was froze solid which made me assume the master was froze up. I do still have access to it if it is something that can be rebuilt. Let me know

Richard

richard2717

02-01-2016 08:04 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by luvmytruck (Post 7469171)

how about a price on the right wing window assy.?

I would like to keep it with the door for the time being.

luvmytruck

02-02-2016 01:43 AM

Re: 66' c60 Parts for sale

hey I got the power steering pump today thanks

if the master cylinder could come out I would take it I can have it sleeved if the bore is bad let me know thanks

richard2717

02-02-2016 09:06 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7469929)

Got your payment. Will send lights out tomorrow.

Thanks
Richard

PM sent with tracking number

luvmytruck

02-03-2016 12:35 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7469931)

well if you would it would be much help. mine is needing rebuilt but cant afford time to remove and rebuild. would rather send out and have a spare built locally. they cannot seem to locate another one I am told 66 is unique for some reason I can make worth your while. thanks

richard2717

02-03-2016 07:55 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by luvmytruck (Post 7471855)

Ok I will not have time to go over there until tomorrow, but let me see what I can do.

sambrutay

02-03-2016 09:23 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7445865)

The grill is still available.

The main grill has some surface rust but no pitting that I can see. The mounting brackets on the back side that are riveted on would need some attention. One side the rivets are gone and there is some minor pitting and break thru on the brackets. I have tried to show this in the attached pictures. I also tossed the bezels in my little blast cabinet and there was a bad spot on the bottom of each one.

If it still interests you I would take $130 shipped to 15126 for grill, bezels and uncut harness.

Richard

Is the grill still available? If so I am interested 40222 zip.

Bruce

richard2717

02-03-2016 09:31 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by sambrutay (Post 7472079)

Is the grill still available? If so I am interested 40222 zip.

Bruce

Let me check on shipping and I will get back to you

richard2717

02-03-2016 09:40 AM

Re: 66' c60 Parts for sale

Bruce,
with shipping to you it would be $140. This includes me building a wood crate so it arrives safe.

thanks
Richard

sambrutay

02-03-2016 10:23 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7472095)

bruce,
with shipping to you it would be $140. This includes me building a wood crate so it arrives safe.

Thanks
richard

i will take it, pm me payment details.
Bruce

richard2717

02-03-2016 12:34 PM

Re: 66' c60 Parts for sale

PM sent

richard2717

02-03-2016 12:48 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by sambrutay (Post 7472131)

i will take it, pm me payment details.
Bruce

Payment received ....will get crated and send you tracking once it ships.

Thanks
Richard

richard2717

02-03-2016 03:26 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7472326)

Payment received ....will get crated and send you tracking once it ships.

Thanks
Richard

PM sent with tracking

richard2717

02-03-2016 04:56 PM

Re: 66' c60 Parts for sale

4 Attachment(s)

Quote:

Originally Posted by luvmytruck (Post 7471855)

I was able to get it off today. I have attached some pictures. It appears it also has clutch cylinder built into it? I took a picture of the numbers stamped in the bottom as well looks like 1.75" bore?

Is this what you are needing? It does not appear in bad shape other than it is stuck but there was some rusty water laying in the rubber boot where the pedal rod comes in to the back

Let me know, I would need a zip to figure shipping

Richard

.

Bigben89

02-05-2016 03:49 PM

Re: 66' c60 Parts for sale

Would like a quote shipped to Alpharetta, Ga 30005 for the right side fender and running boards. Working on a 1960 GMC 4000 and I'm pretty sure those parts are interchangeable. Could you PM pics so I can see what the dents/rust looks like as long as they are still available of course.

richard2717

02-05-2016 03:59 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by Bigben89 (Post 7475107)

take a look at post 49 50 & 52 for pics of the fender and running boards.
I will have to pull them out and figure box sizes up to see if it will be cheaper to UPS them separately or if cheaper to put all 3 in a crate and truck ship. Do you have a Fastenal store close by? if so I can get best rates there probably. you would have to go to their store to pick up.

Richard

richard2717

02-05-2016 04:01 PM

Re: 66' c60 Parts for sale

Looks like there is a Fastenal in Roswell. Let me know if that is an option for you to go there for pick up. In the mean time I will work on getting weight and sizes for shipping

sambrutay

02-05-2016 04:17 PM

Re: 66' c60 Parts for sale

Richard,
The grill arrived today in great shape. Awesome packaging my friend. Thanks again.

richard2717

02-05-2016 04:23 PM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by sambrutay (Post 7475132)

Richard,
The grill arrived today in great shape. Awesome packaging my friend. Thanks again.

Glad to hear it. I try to ship like I want to receive. I threw some micro fiber rags in too if you can use them.

Richard

richard2717

02-05-2016 07:17 PM

Re: 66' c60 Parts for sale

Master Cylinder sold to Luvmytruck. Will ship out on Monday and will send tracking number.

Thanks
Richard

jtrichard

02-07-2016 04:42 PM

Re: 66' c60 Parts for sale

You still have right fender? if so better pic? shipped to 92252 Thanks

richard2717

02-07-2016 05:23 PM

Re: 66' c60 Parts for sale

5 Attachment(s)

Shipping to you would be $155 ups, probably kills the deal Total would be $255

here are some more pictures. No rust thru anywhere. Some surface rust on back side and two damaged spots shown in pictures

.

richard2717

02-08-2016 10:08 AM

Re: 66' c60 Parts for sale

Quote:

Originally Posted by richard2717 (Post 7475301)

Master Cylinder sold to Luvmytruck. Will ship out on Monday and will send tracking number.

Thanks
Richard

Tracking # sent in PM

richard2717

02-16-2016 11:39 AM

Re: 66' c60 Parts for sale

bump to da top, still have quite a few of the parts. I also found the scrapper did not scrap and just moved to his place so I still have access to it if there might be anything else needed that i did not already post.

landerson

02-24-2016 06:38 PM

Re: 66' c60 Parts for sale

Do you have the parking brake handle assembly?

richard2717

02-24-2016 06:48 PM

Re: 66' c60 Parts for sale

I think it is still on the truck. I will have to look tomorrow. Right now we are getting 40 mph winds and horizontal rain with calls for tornado

richard2717

02-25-2016 03:38 PM

Re: 66' c60 Parts for sale

2 Attachment(s)

Landerson,
Here is a picture of the parking brake assembly. Looks complete and moves freely like it should. How much of it do you need, just the handle ar all of the linkages as well?

Richard

.

All times are GMT -4. The time now is 05:50 AM.

Page 3 of 5

Show 40 post(s) from this thread on one page