![]() |
Re: My suburban's Twisted Little Sister
2 Attachment(s)
Quote:
Quote:
Nothing really new. Just weld grind repeat. |
Re: My suburban's Twisted Little Sister
Man that looks way different from the last time I checked this thread!
|
Re: My suburban's Twisted Little Sister
4 Attachment(s)
Quote:
We finished off some more of the welding this week. First the passenger side fender top then the drivers side. Then we started positioning the sheetmetal so we can start tacking the top and bottom of the fender together |
Re: My suburban's Twisted Little Sister
Was out your way on Thursday late afternoon seen an orange 60's pickup truck in that area but not sure if you know where that is..It was. Close to Kent Bridge
|
Re: My suburban's Twisted Little Sister
i'm sorry to say this, but i don't think you're gonna like the truck when you're finished. might as well start converting it to diesel and i'll take it off your hands. jk. looking good!
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
Quote:
Pulled the suburban out of storage this week. It needed a new battery and a fuel pump relay. We also test fit the hood and found that we have to tweak the fender alignment a little bit. |
Re: My suburban's Twisted Little Sister
Both burbs are looking good!
|
Re: My suburban's Twisted Little Sister
1 Attachment(s)
Burb! Burb!
Hey got an idea. Put steel wheels on it and make plywood hubcap. Something like this. Attachment 1644575 |
Re: My suburban's Twisted Little Sister
Next time,,we were dropping a trailer off .. then picking a wrecked big truck in Windsor
|
Re: My suburban's Twisted Little Sister
5 Attachment(s)
We spent the last couple of days welding the fender top to the bottom. So far we have about 2/3 of the driver side done. To break up the monotony we decided to start making the pieces to attach the piece we cut off the front of the hood, to the grille. We got the two center sections tacked in and started working on small pieces that will come next.
|
Re: My suburban's Twisted Little Sister
Looks great Dale. So the hood will open behind the red panel?
|
Re: My suburban's Twisted Little Sister
Looking good Dale, are you still going to use the twin C2 style lights
|
Re: My suburban's Twisted Little Sister
Awesome
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
Quote:
Quote:
We finished welding the top and bottom of the fenders together. Then we removed the hood that we had tacked in place. Next step was to make a panel to attach the front hood section to the rad saddle |
Re: My suburban's Twisted Little Sister
3 Attachment(s)
We made the small panels that will be beside the lights. Next we cut out a section of the top of the rad saddle where the lights will go.
|
Re: My suburban's Twisted Little Sister
Are you moving the lights up to the hood
|
Re: My suburban's Twisted Little Sister
3 Attachment(s)
Quote:
We finished the modifications to the top corners of the rad saddle. We made a new top for the corners and welded them on. Also we got a little bit of welding done on the front panels. Still lots to do. |
Re: My suburban's Twisted Little Sister
2 Attachment(s)
To reenforce the front edge of the fender where the headlights will go we bent this piece. Then we tacked it in place.
|
Re: My suburban's Twisted Little Sister
Quote:
I love this thread..... may have mentioned it before. |
Re: My suburban's Twisted Little Sister
i have been away awhile, are those the new wood grain custom wheels?
|
Re: My suburban's Twisted Little Sister
Can't wait to see this thing in person.
|
Re: My suburban's Twisted Little Sister
Building it Slick with all the cool stuff.
|
Re: My suburban's Twisted Little Sister
5 Attachment(s)
Quote:
Quote:
Quote:
Quote:
This week we did some more welding on the front panels. Also we made some panels for around the headlight buckets. One piece is welded to the fender. The other pieces are welded to the grille surround. |
Re: My suburban's Twisted Little Sister
5 Attachment(s)
We made some more progress on the headlight buckets. We made a plate for the back. Then we modified the piece the lights mount to. Then we cut two holes in the back plate. Finally we set the pieces in place
|
Re: My suburban's Twisted Little Sister
I continue to just love this build.
Front end shaping up nicely too. |
All times are GMT -4. The time now is 07:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com