Re: GM Semis
|
Re: GM Semis
think he put the cab over a newer frame
|
Re: GM Semis
Here is a Volvo badged as a Chevrolet in South America.
Found these on another site. http://i911.photobucket.com/albums/a...age.jpg1_5.jpg |
Re: GM Semis
|
Re: GM Semis
|
Re: GM Semis
Beautiful truck.
This would be an early model, '66 or '67. |
Re: GM Semis
It sure is. Well optioned, nicely accessorized...clean and subtle, with a tri-tone scheme that goes with the body. That paint has a fleet look to it, which I think is cool.
Bill, one of these days I'll have to get you to teach me all the ins & outs of identifying the years, configurations, etc on these. FYI, that ATHS Tri-State show is coming up next month in Winchester. I know it's still a hike, but not all that bad...if you can swing it |
Re: GM Semis
Tim,
Winchester is about 4 hours away, and I'm going to make it there someday, lol. But doesn't look good again this year. The way to identify the years is by the Directional Light locations and the Style of them. Also by some of the Emblems. Sometimes Cab Lights and it seems like the Triple Horns were only on the early models as well. But this is all if the truck is original. When things get changed around, it can really throw you off, lol. |
Re: GM Semis
I'll keep reminding you every year and the rest is up to you.. I don't doubt you would like to go.
I've seen you mention those differences but not sure what or when. I see this one is before the 69-72 style emblems and no body mounted directional signals. There's also the weights by bumper, fenders, and headlight location, right? Between you and Dan I'll get it one day. I think I need to see a thread showing examples of all the differences to study. |
Re: GM Semis
The '66 and '67's have Thinner Round Directional Lights located on the sides of the Cowl. Sometimes they are hung on the Mirrors like the truck above, but I would really say that was more in '66 than '67. Also the Style and Location of the "GMC 9500" Emblem. The early ones also have the separate "Diesel" Emblem on the side at the front, also like the truck above.
In '68 and '69, the Directional Lights got moved to the Front, were still Round, but a little different Style and somewhat Thicker. I believe the Emblems then got changed to the type that we are more familiar with, moved to the side of the hood, and also the separate "Diesel" Emblem was dropped. In '70, the Directional Lights went to Square. As mentioned above, it seems like the Triple Horns were on the early ones only. Now this is all for Low Hood Trucks. The Raised Cab was out in '73 or '74 and had many visible differences. Dan will probably know more about the Raised Cab trucks than I would. But I believe one of the reasons was to have a Larger Radiator in it. But when I try to determine the year of a truck, I try to take all the details available into consideration, and as mentioned above, once something is changed around, it can be a challenge, lol. The real way though, if possible, is to check and decode the VIN on it. Bill |
Re: GM Semis
For a good example of a '68 or '69, check back to post #1138. It's a Chevrolet, but has a good example of the Round Directional Lights that were moved up Front. Although the Brochure says "1970" lol. They are known to be wrong. Unless they used them very early in the year, which is possible, I believe they used a '69 for the picture.
Bill |
Re: GM Semis
And I got the pic for the 3 horned Long hood.
Didn't even look at the ATHS card, I zoomed in. Appears to say 68 |
Re: GM Semis
I first saw that MH 9500 on post 1165 at the Colorado Springs convention and noted the triple horns at that time in my pictures . They were option "UO4" in the 1966 sales data book [for '67] and were listed for $125.00 at that time.
Does anybody have any data on options or frills on the MH or MI 9501 versus MH or MI 9500 . Supposedly was more deluxe, per rumor, but how ? |
Re: GM Semis
Quote:
I found something on it that Bob B. wrote on Page 33 in this thread: "Went back and looked closely at this truck. I think it might be an MH-9501, not the standard 9500. The 9501 was a special lightweight 'western' style long conventional (think Peterbilt 359). The 9501's usually came with Alcoa wheels, lot of other aluminum parts like fuel tanks, ect., and a 318 horse 8V-71/Roadranger. One other feature the 9501's often had was a 3 trumpet Grover air horn. Take a close look at the horn on this one." Unfortunately the picture that Kool posted is now gone (at least I can't see it now). Bill |
Re: GM Semis
|
Re: GM Semis
Quote:
|
Re: GM Semis
Quote:
Quote:
|
Re: GM Semis
The real oddball would have been the ME-9500. Long conventional with the 637 gas V-8 in it. Brochures show that model available in '66-'67, wonder how many they built. I have seen JE-9500 short noses with the 637.
|
Re: GM Semis
Quote:
California... it's a gas job with some B.O.P didn't recognize it. |
Re: GM Semis
Quote:
The '71 9500 I used to drive had a 637 in it. It also had a 10-Speed Road Ranger in it. To this day, since we got the truck in the spring of '72, I have never seen, or even heard of another, with a Road Ranger trans. Just about all the 637's in J or H 9500's I have seen (online only) through the recent years were in Fire Trucks, but every one was a 5-Speed, 2-Speed Rear. Glad to learn something new. I never knew my old truck was a "JE". Also never knew they made an "ME". My "JE" had 12 Fronts and 34 Rears (20 Ft Flatbed Dump). I'm going to say that the RR was a 610. The 637 didn't have much Torque and you had to do a lot of Shifting, which I didn't mind, lol, but was a real good all around truck that hauled some interesting loads. |
Re: GM Semis
Quote:
|
Re: GM Semis
It is strange as we also had a 478 V-6 in a '62 6500. The 478 had a ton of Torque, and they both looked alike. The 637 looked just like a 478 with 2 extra cylinders "welded" on.
That always puzzled me until one day someone explained that even though they looked the same, they were very different inside. |
Re: GM Semis
Quote:
|
Re: GM Semis
Bob,
We may have asked you this already, but do you remember any 12V-71's in an MH-9500 Long Nose? Some say they were available and some say they weren't, but it seems that somehow, some were out there. Bill |
Re: GM Semis
Quote:
Another GMC 'unicorn' is the tandem axle Steel Tilt 9500 with an 8V-71 in it. Both the 6V-53 and 6V-71 were used offered in Steel Tilts as regular options, but I have been told there were some built with 8V-71's for auto haulers, notably Pacific Motor Transport on the west coast. |
Re: GM Semis
|
Re: GM Semis
Very interesting. Looks like that thing was one heck of a wrecker in it's day. It's day could come again!
|
Re: GM Semis
They are both very restorable.
The Long Nose has the indications of a '66 or '67 though. Are you going to buy them Tim? |
Re: GM Semis
I don't know why they couldn't put a price in the listing. I hate calling just to find out if I even want to consider buying something or not. Fact is, if they were $1,000 I couldn't do it anyway.
I was thinking the same thing on the long nose being 66 or 67, then I saw them claim it's a '69 and started doubting what I thought I knew. I see the emblems and turn signals not on the front indication early model |
Re: GM Semis
three horns.... doesn't that indicate some special package ? or was it optional seperately ?
|
Re: GM Semis
Quote:
|
Re: GM Semis
|
Re: GM Semis
1 Attachment(s)
Not sure the year but he's about to drive up on the portable scales
|
Re: GM Semis
I'm not good at the older years, but I'm going to say some where around 1935.
Interesting picture. |
Re: GM Semis
realy like the looks of that era trucks
theres not a lot left here out that era because of the ww2 they all gotten scrapped for the war effort |
Re: GM Semis
here's one for you to "put a year on" ! lol
front mounted lights ( one of each ) tilt hood chevy, no emblems and 3 different clearance lights ! https://farm1.staticflickr.com/766/2...98f12b20_c.jpg oh and mounts for a single grover horn ( the horn currently resides in the cab ) |
Re: GM Semis
just noticed the no air horn truck in post #171...... are those millitary NDT tires on the rear ? what a gawd awful beast that must have been on the road, wonder if it was a special order mining or construction truck or something?
|
Re: GM Semis
No. They're not NDT's. Close. NDT's at least of that era have a wider tread separation. Had a truckload of them at one time.
|
Re: GM Semis
|
Re: GM Semis
Seen several references to "steel tilt" hoods. Can someone explain what that is?
|
All times are GMT -4. The time now is 09:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com