Re: 68 S/C update.....
That sounds NICE!!! :metal:
|
Re: 68 S/C update.....
Thing sounds awesome rob. Got my blood pressure up for sure. Do you remember the cam specs?
Thanks, Wade |
Re: 68 S/C update.....
Sounds awesome :metal:
|
Re: 68 S/C update.....
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
**** Just ordered HP Tuners....I'm jumping into the deep end..... |
Re: 68 S/C update.....
HPTuners finally arrived! I'm not sure what I've gotten myself into, but at least now I feel like I have some control of the process.....more to follow!
|
Re: 68 S/C update.....
5 Attachment(s)
Ernie came over yesterday afternoon and helped me get the hood on and finish the install of the PB trailing arms. I still have a few loose ends to tie up under the hood (wiring/catch can/cold air box), but all I'm really down to now is the computer tune and getting the exhaust redone. Seems like this has taken forever, but I'm pretty happy with the way things are coming out. Here's a few pics!
|
Re: 68 S/C update.....
Nice. The pay off will be worth all your hard work.
|
Re: 68 S/C update.....
I'll come over and help you lay some stripes on that coulda sac!!!
|
Re: 68 S/C update.....
I cat see the video but by the looks of it I could only imagine how bad ass this thing is going to run
|
Re: 68 S/C update.....
Looks like it's coming along nicely!!
|
Re: 68 S/C update.....
Good to see this one in one pile again... Your boys is next!
|
Re: 68 S/C update.....
That looks great! Looks like you're ready to roll in this bad boy.
|
Re: 68 S/C update.....
Very nice!!
|
Re: 68 S/C update.....
That supercharger looks sick. I bet you can't wait to drive that thing! Love the gold paint. You leaving it or painting it?
|
Re: 68 S/C update.....
2 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Here's some pics of the paddle shifters and wheel installed.... |
Re: 68 S/C update.....
Paddle shifters look awesome!!
|
Re: 68 S/C update.....
Man what a wicked build this is. Staying true to form brother :metal:
|
Re: 68 S/C update.....
That paddle shifter looks killer with that wheel!
|
Re: 68 S/C update.....
Where did you get the close-out panel for the top of the radiator?
|
Re: 68 S/C update.....
Quote:
Quote:
Quote:
Quote:
|
Re: 68 S/C update.....
Quote:
|
Re: 68 S/C update.....
He got it from Northwest Auto Fab, their products page doesn't work on the website though. I called a couple of weeks ago and he does still have some in stock and will take your payment and address over the phone. Mine are patiently waiting to go in.
http://www.northwestautofab.com/ |
Re: 68 S/C update.....
Quote:
|
Re: 68 S/C update.....
Thanks so much!
|
Re: 68 S/C update.....
Quote:
|
Re: 68 S/C update.....
Played with the injectors some more and got it to light off and idle!!!!!
:metal::metal::metal::metal::metal::metal::metal::metal::metal::metal::metal: http://instagram.com/p/ghIL3jknuC/ |
Re: 68 S/C update.....
AWESOME!! Can we do burnouts yet?
|
Re: 68 S/C update.....
Quote:
|
Re: 68 S/C update.....
Quote:
|
Re: 68 S/C update.....
Awesome!
|
Re: 68 S/C update.....
Glad she is running again!
|
Re: 68 S/C update.....
Rob you are my inspiration....Love everything about this truck...
|
Re: 68 S/C update.....
Quote:
Quote:
Quote:
Quote:
Quick update guys. I've been chasing a fuel trim problem for 2 or 3 weeks now. I was getting a misfires and a lean fuel trim on the right side only. I had checked injectors, coil packs and O2 sensors. I did a compression check, all cylinders 220 psi +/- 5. Did a smoke check, could not find any vacuum leaks. I even traced the injector/coil pack wires but couldn't find and visual problems. Stonewalled. I was totally scratching my head.... I had set up an appt to get the exhaust put back on yesterday hoping I would have everything figured out. I almost cancelled it since the truck would hardly run, but since I had taken the day off, I went ahead and called a rollback and had it hauled to the exhaust shop. I had planned on putting on some new Magnaflows that I had laying around, but they wouldn't fit, :(. I had wanted to switch the Magnaflows because I had read that they sound better with the LS motors, oh well....And with the new crossmember I built for the 6L80 tranny, my electric cutouts weren't working out so well either, :(. So I just told the exhaust guy to reconnect the Flowmasters that were on there (50 series) and at least I could do some tuning without getting fumigated. OK, so we get everything hooked up and I start the truck up just to see how it sounds....and to my surprise, I like it! And to my even bigger suprise, I hook the HPTuners scanner up and all the issues I was having with misfires and crazy Fuel Trims were gone!!!! Other than running a little rich, the idle is good and it's not throwing any codes. So the Moral of the story is, NEVER do any tuning on a FI motor unless you have the exhaust on and don't believe everything you read on the internet, :D . I'm eating some serious humble pie, I would never have thought that not having the exhaust on would have created the "symptoms" that I was seeing going on with my motor. Go figure. I did learn a lot through this experience, and will be a better "tuner" because of it. Now I have to undue some things I did when I was chasing a problem that wasn't there, :lol: . |
Re: 68 S/C update.....
Do you think it just needed that tiny amount of back pressure?
|
Re: 68 S/C update.....
Quote:
|
Re: 68 S/C update.....
Glad you figured it out. Truck is going to be so cool. Cant wait to see this one complete. Also love the paddle shifters that is a nice touch in an already cool truck
|
Re: 68 S/C update.....
Glad all is working out, I noticed the same thing when I got my exhaust put on. But now I have two codes sayng system lean bank 1 & 2....
|
Re: 68 S/C update.....
Quote:
Quote:
|
Re: 68 S/C update.....
Kind of factory...kind of custom...lol, I cut some parts off and stuck a cone filter on the end of it. I will be gettin it dyno tuned some time after the new year to squeez all available hp and torque out of it. But she still runs good....i think!
|
Re: 68 S/C update.....
Quote:
|
All times are GMT -4. The time now is 01:50 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com