The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   What did you do to your truck today! (https://67-72chevytrucks.com/vboard/showthread.php?t=401176)

magwakeenercew2jh 12-08-2010 12:58 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Oops!

http://www.whitegauges.net

Here they are before the tach.

Frank71 12-13-2010 01:32 AM

Re: What did you do to your truck today!
 
Just installed a hidden hitch from early classics enterprises. Simple install, fast shipping, great people to work with.:metal:

Jacfourteen 12-13-2010 02:19 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by magwakeenercew2jh (Post 4337856)
They are "decals" from whitegauges.com (I think that's the right way to spell it). Reasonable. Good people and easy to install.

I installed the same kit, real easy and looks good!

Jacfourteen 12-13-2010 02:20 AM

Re: What did you do to your truck today!
 
I Changed my valve cover gaskets and put my bed back on.

RenoKeene 12-13-2010 09:44 AM

Re: What did you do to your truck today!
 
1 Attachment(s)
Pulled the old fuel and brake lines off of Shorty, removed the engine stands, stripped the hardware off the doors, pulled the emergency brake mech, visors & clips and rear view mirror from the cab. Drank a beer and stared at my pile of stuff....this is going to make a great truck! Also decoded the VIN....it's a 69' :metal:

Mxracer202 12-13-2010 01:38 PM

Re: What did you do to your truck today!
 
FINALLY got my engine hoist!!! and a stand all for $110 ive been waiting for this so i can finally start on the spare I6 thats gonna be put in my 67 for a while, took a ton of pics but have yet to load them on, pulled the old farmer tires off, got some used ones for free just so she can "ROLL'' :) getting the tires ready to be mounted on my slots, made good progress yesterday in a short time. just need more money...dont we all. well i think im ready to start a build thread! maybe later tonight! other than the motor tipping in the back of the truck and puking oil everywhere it was a good day.

quick question. ok so i cant decode the engine number ive looked ALOT and its kind of frustrating all i remember off the top of my head is it ends in THS and came off of a 70's ish suburban. and it has 6'' side covers so is it a for SURE 292??

nickp51chevy 12-13-2010 03:06 PM

Re: What did you do to your truck today!
 
I swapped carbs the other day to an earlier Qjet. I didn't like how it ran so I put the later Qjet back on this morning. I know not exciting, but it's what I did. I plan on driving it later :)

60ratrod 12-13-2010 03:47 PM

Re: What did you do to your truck today!
 
You ever get the lean figured out nick?
Posted via Mobile Device

rondog4416 12-13-2010 07:48 PM

Re: What did you do to your truck today!
 
i picked up a set of buckets seats,center console,overhead console,and 2nd row seat out of a 99 burb for my 68 burb

Kidd-7 12-13-2010 08:02 PM

Re: What did you do to your truck today!
 
Picked up a rebuilt QJet; waiting for my headers & intake to come back.

justagoodolboy 12-13-2010 09:59 PM

Re: What did you do to your truck today!
 
I got a tilt steering column today. A guy I know told me he had one and that I could have it for $30 if I pulled it, so I went and got it. The truck didn't have an engine and bottom of the column was already apart so I just hopped into the engine bay and yanked it. Then I went over my bed with 220 grit sandpaper getting ready to prime and found 3 more dings where I need filler. GRRRRR! I thought I was done but I guess not.

And my bed and radiator support mounting kits came from GMC Paul's. We're not real busy at work so I've been working on my truck all this month. It's great to have full days to work on it and to see progress but some days I do feel a little overwhelmed.At least the main body work is done and hopefully I'll shoot color on the inner fenders and firewall and set my cab back on this week. That should get me motivated.

nickp51chevy 12-14-2010 12:15 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by 60ratrod (Post 4347717)
You ever get the lean figured out nick?
Posted via Mobile Device

I don't know. I don't think I did but I might be running rich now. I could use some help getting it tuned right.;)

Valhalla 12-14-2010 01:17 AM

Re: What did you do to your truck today!
 
got my front and rear 13 inch brakes, painted the calipers and rotor hats. Placed an order for my new axles.

60ratrod 12-14-2010 03:05 AM

Re: What did you do to your truck today!
 
Well if you were runnin an edelbrock carb i could help ya out. Ain't so good with the quadrapuke
Posted via Mobile Device

bif 12-14-2010 09:50 AM

Re: What did you do to your truck today!
 
Changed the oil and filter
Posted via Mobile Device
Posted via Mobile Device

Navy Mechanic 12-14-2010 10:09 AM

Re: What did you do to your truck today!
 
3 Attachment(s)
PO had the license plate hanging from the hitch receiver with a zip tie. Not the cleanest installation. I made this by mounting a license plate bracket to a receiver plug. Now I need to find a lighted frame and/or install a small LED light to be legal.

Kidd-7 12-14-2010 11:05 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by nickp51chevy (Post 4348661)
I don't know. I don't think I did but I might be running rich now. I could use some help getting it tuned right.;)

Here are some links I've found about the QJett:
http://www.florida4x4.com/tech/quadrajet/
http://www.carcraft.com/howto/57178/index.html

I'll be doing this soon; let me know if this helps.

trkfrk 12-14-2010 10:18 PM

Re: What did you do to your truck today!
 
I machined my front rotors to fit my Boss 338 wheels.

http://i806.photobucket.com/albums/y.../dectrk009.jpg

http://i806.photobucket.com/albums/y.../dectrk004.jpg

Garthc20 12-15-2010 04:37 PM

Re: What did you do to your truck today!
 
I installed a new grant steering wheel, now I have a horn that works! It was kind of interesting to do it without a puller. I ended up putting the big nut under the wheel and using the three small outer bolts to pull it off the spline. It just makes me feel better with a horn to let people know I'm here! Also got a new stool for my garage and stuff to do an oil change
Posted via Mobile Device

scooterskoolkustoms 12-15-2010 04:45 PM

Re: What did you do to your truck today!
 
Damn started the truck and found water in my oil,no what i have oil in my water.anyway pulled the heads and found a set of thin metal head gaskets with water leaking in # 6 and 8 cyl.so I'm off to buy a good set of head gaskets and put her all back together again.

Hubscrub 12-15-2010 06:46 PM

Re: What did you do to your truck today!
 
looked out the window at it to see how much ice has accum. on it :lol:

nickp51chevy 12-15-2010 07:29 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Kidd-7 (Post 4349153)
Here are some links I've found about the QJett:
http://www.florida4x4.com/tech/quadrajet/
http://www.carcraft.com/howto/57178/index.html

I'll be doing this soon; let me know if this helps.

Thanks for those. I'll have to spend some time going through those. I'll let you know if I find anything that does help.

60ratrod 12-16-2010 01:27 AM

Re: What did you do to your truck today!
 
i hauled out the old motor on my own in about 3.5 hours. not too bad for doing it myself. but then again that isn't totally consecutive. i had to stop to get my wife's cat from the vet, my daughter from daycare, and then run back to the parts store to get hyd fluid for my cherry picker

nickp51chevy 12-16-2010 02:36 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by 60ratrod (Post 4352869)
i hauled out the old motor on my own in about 3.5 hours. not too bad for doing it myself. but then again that isn't totally consecutive. i had to stop to get my wife's cat from the vet, my daughter from daycare, and then run back to the parts store to get hyd fluid for my cherry picker

At least it was wormish for ya. :lol:

60ratrod 12-16-2010 02:52 AM

Re: What did you do to your truck today!
 
Yeah, but it started raining when i had to stop cause the ram on my hoist ran out of oil and get more. And what was worse is i had to set the motor down with out being bolted in to service the ram
Posted via Mobile Device

swamp rat 12-16-2010 05:36 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by 60ratrod (Post 4352869)
i hauled out the old motor on my own in about 3.5 hours. not too bad for doing it myself. but then again that isn't totally consecutive. i had to stop to get my wife's cat from the vet, my daughter from daycare, and then run back to the parts store to get hyd fluid for my cherry picker

Well now that you mentioned the cat, daughter and the hydralic fluid run i guess 3 1/2 hours isn't too bad. :) When i pulled my engine back around 95 i had the fluids, fan and radiator out in about 30 min, then went to get a cherry picker, brought it home and had the engine out and the picker back in about an hour.. Oh to be young again! LOL!

Rustybaggs 12-16-2010 05:39 AM

Re: What did you do to your truck today!
 
While deployed....I once again spent my time off researching the c*#p out of this forum....it just never ends. There are so many different threads and different ideas that I'm now confused on were I want to go with my 67 stepside once I return.

Ohhh, and my wife gets a call saying "the truck is an eye soar" sitting in the driveway......some people just don't get it.

60ratrod 12-16-2010 12:37 PM

Re: What did you do to your truck today!
 
both times that i pulled a motor out of this truck i never removed the rad. always managed to clear the rad and core support just fine. i just wish i didn't have to pull the hood to get the motor out though

dan76 12-16-2010 12:52 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by Rustybaggs (Post 4353088)
While deployed....I once again spent my time off researching the c*#p out of this forum....it just never ends. There are so many different threads and different ideas that I'm now confused on were I want to go with my 67 stepside once I return.

Ohhh, and my wife gets a call saying "the truck is an eye soar" sitting in the driveway......some people just don't get it.

Thanks for your service.

Suggest you get a truck cover sent to your wife so she can cover it. Not only does she not need "nosiness" from the neighbors, but if it's unregistered/uninsured someone may call the code enforcement folks and they'll start hassling her. If it's covered, they can't look under the cover for a current license. The cover will also help protect the truck from folks with sticky fingers from lifting parts.

Good luck and come back safe.:flag:

mcmlxix 12-16-2010 06:57 PM

Re: What did you do to your truck today!
 
I found out my rear axle is worn out.... probable never serviced.... so I started looking for a 14BFF ... Go big or go home, right?

BAGNDRAGIT 12-16-2010 08:11 PM

Re: What did you do to your truck today!
 
put in a new vacuum advance in my distributor. 10 mins. next, torque converter...hopefully only 2 or 3 hours.

imholte 12-16-2010 08:18 PM

Re: What did you do to your truck today!
 
Put in a new starter. Could have done it last summer when I knew it was getting tired, but I figured it would be better to wait till it was 30F outside to do it.

Starts perfect now.

ItsRandy 12-17-2010 03:29 AM

Re: What did you do to your truck today!
 
I picked up my new 4l85E today. Now I can get started on my project. Had to wait until I had all of the big parts before tearing my truck apart (ZZ502, 4l85E and a Strainge 9" with Wilwood brakes).

60ratrod 12-17-2010 10:25 AM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by imholte (Post 4354148)
Put in a new starter. Could have done it last summer when I knew it was getting tired, but I figured it would be better to wait till it was 30F outside to do it.

Starts perfect now.

doesn't it always seem like a good idea?:lol:

67Slider 12-17-2010 02:24 PM

Re: What did you do to your truck today!
 
Finally got to start working on my bed wood again. It's been a couple of weeks and I havent got to do anything but fire her up for a few minutes. Sanded down the bottom side and put on the first coat of Spar Urethane. Hopefully it dries enough today that I can put another coat on tonight. Got two more coats to go then I can start on the top side.

magwakeenercew2jh 12-17-2010 03:00 PM

Re: What did you do to your truck today!
 
1 Attachment(s)
It's raining and dreary here today. Made a trip into town yesterday and got an early BD present from the Boss (wife). She had already ponied up $200 of the $400 for the front and rear window purchase/install.
That was supposed to be it. But when she saw me pawing a Craftsman polisher (for the interior I painted a few weeks ago), she "insisted".

Nice.

So, today, I'm staying under the roof next to the wood stove.....and reading the Forum.

Let's see if I can find some kind of pic that's related to this post.....Thanks for the polisher, Woman!!!! (Just in case she reads the Forum today ;) )

legendary 12-17-2010 03:59 PM

Re: What did you do to your truck today!
 
Quote:

Originally Posted by dan76 (Post 4353427)
Thanks for your service.

Suggest you get a truck cover sent to your wife so she can cover it. Not only does she not need "nosiness" from the neighbors, but if it's unregistered/uninsured someone may call the code enforcement folks and they'll start hassling her. If it's covered, they can't look under the cover for a current license. The cover will also help protect the truck from folks with sticky fingers from lifting parts.

Good luck and come back safe.:flag:

See above...and thank you for your service

glider_6969 12-19-2010 03:56 PM

Re: What did you do to your truck today!
 
Today I put in, the radio, antenna, which is hidden under the cowl, I filled in the hole on the cowl during the body work, wanted a cleaner look. The wipers back on,, washer pump wouldn't work so I put in a universal one under the hood.: 68gmc2:

67chevy1series 12-19-2010 04:04 PM

Re: What did you do to your truck today!
 
did a little painting hope to make my truck like thishttp://i84.photobucket.com/albums/k2..._c10side-1.jpg

sjarrett71 12-19-2010 05:04 PM

Re: What did you do to your truck today!
 
Nothing to the truck but installed a new connecting rod in my air compressor. No I've just gotta fill it up with oil and get my electric routed and I'll be in air tool heaven!


All times are GMT -4. The time now is 02:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com