Re: My new build thread: Stage 4!
Please keep the snow to yourself up there, I'm not ready yet.
|
Re: My new build thread: Stage 4!
I'll do my best with that request, but can't make any promises!
|
Re: My new build thread: Stage 4!
1 Attachment(s)
Upgraded the K5's charging system with stuff from Jegs. 100 amp 1 wire alternator, high amp alt wiring kit, 50 amp fuse block with extra fuses, and 24" ground wire kit. Just need to pick up a new v belt and get it all installed!Attachment 1591495
|
Re: My new build thread: Stage 4!
Well here it is, working on getting a list of what I have for the welding process. All the parts needed will be listed soon, as I have many of them here allready. I just am not sure what is the proper order of installation. I just need to get going on this so I can take my wife wheeling before it's too late. She is doing good, but I have to stop dragging my feet on this and get it mobile enough to take her for a good ride!
|
Re: My new build thread: Stage 4!
Can you keep that barn warm enough to work in?
|
Re: My new build thread: Stage 4!
Gotta question about the vin # on my K5. Understand the first 6 digits, but not the last the last 6. They are 145036, what do they mean? I thought they meant the number built that year, but makes no sense? Anybody? It is a 1970 K5 4x4 w/v8 4speed.
|
Re: My new build thread: Stage 4!
Last six is production number. So that yours is the 145036 vehicle coming off the line. I'm guessing it's all trucks as cars would have a different vin.
|
Re: My new build thread: Stage 4!
|
Re: My new build thread: Stage 4!
Ok, I get it. I just didn't think they produced over 14,ooo K5's in 1970. All the info I have seen was around 11,ooo. If this is true, mine must have been made near the end of the 1970 run?
|
Re: My new build thread: Stage 4!
That was the complete number up to yours of all trucks coming off the assembly Line at that plant in pretty sure. Not just k5s. According to the site I posted above, there where 12422 blazers made that year. 985 2 wheel and 11527 4 wheel drive.
|
Re: My new build thread: Stage 4!
Thank's chuli. I get it now.
|
Re: My new build thread: Stage 4!
No problemo
|
Re: My new build thread: Stage 4!
Well guy's I am back! Wife is doing real good. The weather is getting better here. Got some work done today. A lot of grinding and drilling, and pounding. But I got the last two rivets out of the drivers side rear shock mount. Got a replacement mount prepped and ready to go in with new bolts and hardware. After this step, we are back on the body bushing stage!
|
Re: My new build thread: Stage 4!
2 Attachment(s)
Forgot to post a couple pic's!
|
Re: My new build thread: Stage 4!
2 Attachment(s)
Shocking news! I got the 4th shock mounted last night after work. Got the drivers side rear mount replaced and all four are good to go. Feels good!Attachment 1644817
Attachment 1644818 |
Re: My new build thread: Stage 4!
Ok, Things just changed for the better! My buddy John who helped me with stage 4=1 ton axle upgrade, etc.-His son Craig is willing to take on my project! He has his own shop called MAYHEM about 3 miles north of my house. He is a excellant welder/fabricator/brainiac! He is willing to help me with the remaining body mounts, welding in all replacement stuff, fabbing up a rollcage, fabbing up the rear bumper setup, etc! I am really pumped about this, he is booked up until the first of June. Gives me time to get the K5 prepped and assembled to make the trip up to MAYHEM GARAGE! We did a walk through on the K5 today, and he say's BRING IT! Bring on stage 5!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Spent the whole day playing at the local offroad park. What a blast, went with my son in law driving my daughter's Jeep. All day with very little body damage. Sure is fun, and he sure can drive! Got some pic's!Attachment 1645133
Attachment 1645134 Attachment 1645135 Attachment 1645137 Attachment 1645139 |
Re: My new build thread: Stage 4!
3 Attachment(s)
Attachment 1647643
Attachment 1647653 Attachment 1647654Out in the pole barn today. Organizing all the replacement metal panels that need to be welded in. It's a long list of parts, and not sure where we are gonna start. But man am I ready to get going on this phase and get it up to MAYHEM GARAGE! Some old pic's of the metal inventory! |
Re: My new build thread: Stage 4!
4 Attachment(s)
|
Re: My new build thread: Stage 4!
Wow that's a lot of panels. Got your work cut out for ya for sure.
|
Re: My new build thread: Stage 4!
3 Attachment(s)
Spent a little time at MAYEM GARAGE tonight. Working on a K5 to take skimming next weekend. Got the 454 fired up, but stuff to do before next weekend.Attachment 1649592
Attachment 1649593 Attachment 1649594 |
Re: My new build thread: Stage 4!
Well I got a little done tonight after work. Wanting to put the hood back on this weekend, so I cleaned up the cowl/windshield area and got it painted. Allready got the cowl painted and will put it back on tommorrow night after work. Only got a couple of weeks before I go up the road to MAYHEM GARAGE! I'll get some pic's this weekend when the hood is back on.
|
Re: My new build thread: Stage 4!
Got the tailgate back on today. I had broken the two lower bolts off that hold the trunions on when I removed the gate. Drilled them out, and installed nutserts. Worked perfectly. Painted all areas with primer for now. I had the tailgate sandblasted and I primered it also. Working on getting enough correct bolts to install in the double wall top, to snug everything down before I start with the body mounts again. I only have about 6 bolts in now. Hoping to get some help here tommorrow to reinstall the hood. Feels good, tailgate done, cowl installed. Every bolt I reinstall is coated with antisieze! Man, I am getting there finally!
|
Re: My new build thread: Stage 4!
5 Attachment(s)
Looking at my hatch next. I have my original one in decent outer shape/with no guts, and another one with all the guts/but some outer issues. No way the screws are coming out of the struts on my original/rusted big time.Other one struts came off and cleaned up nice.I have a bunch of spare parts for this including a original handle/with GM keys. Think I am going to mount up the white one and see if I can make it latch right. If it works ok and latches right, I will worry about the cosmetic problems of it later. Sound like a plan?Attachment 1653410
Attachment 1653411 Attachment 1653412 Attachment 1653413 Attachment 1653414 |
Re: My new build thread: Stage 4!
4 Attachment(s)
Yes, I am getting busy on this lately. So much to do before I let Craig have his way with it next month. My son inlaw helped me get the hood back on today. Feeling good, wife is smiling and no worries about my late hours after work. Some pic's of the tailgate and hood reinstall this weekend!Attachment 1653738
Attachment 1653739 Attachment 1653740 Attachment 1653741 |
Re: My new build thread: Stage 4!
Got a little more done tonight after work. Worked on the double wall top bedside bolt area. There are 6 bolts on each side, and I have 3 on each side that hold. Really did not remember what was going on there since I pulled the top off for the first time back in the eightee's. I am sure this has been discussed before, but here is my plan. Going to buy a 5/16th rivenut tool, 5/16th rivenuts and just drill new holes near the original ones that are stripped out. As long as there is some solid metal left somewhere in that mounting strip that should work-right? Anybody tried this with a double wall top?
|
Re: My new build thread: Stage 4!
Well, I couldn't wait for any responce. Just ordered up a hand rivenut tool for the 5/16th-24 bolts, and a bunch of rivenuts. Could be interesting installing them, but I am sure I can use some of them elsewhere on this rusty build! Got at least one bad one at the visor area on the drivers side! Got the tool and 20 nuts shipping here for under $50.00!Already got the 3/8th puller here, and now the 5/16th coming, just may need to get a 1/4in one in the future! Any of you guy's using this type of repairs?
|
Re: My new build thread: Stage 4!
Well, I am on a roll now. Working on the K5 and polebarn everynight after work has inspired me to spend more money on this build. Working on the rear bumper/carrier design. Ordered up two Jerry cans/with mounts. One red for fuel, and one green for water. Two jerry cans, one spare tire mount, and maybe my highlift jack back there too!
|
Re: My new build thread: Stage 4!
Where did you get the rivnut tools from? Just wondering why you're using 5/16-24 ? I'm not a fan of fine threads unless bolt strength is critical.
|
Re: My new build thread: Stage 4!
Got the 5/16th tool from PegasusAutoRacing.com. I would have rather went with a 5/16thx18 thread, but they do not offer one. I think it will be fine being I have 3 original bolts on each side allready holding. Gotta pick up the bolts tommorrow and install them. Got a little more stuff around tonight.Front center top mounts and bolts ready to go back in. Not sure what to do with the long visor bolts yet, both sides the caged nuts are loose and floating around in the holes. Any advice on how to repair this area anyone?
|
Re: My new build thread: Stage 4!
Well my plan has worked out so far. Drilled pilot holes in the bedsides/topper and then redrilled them to 1/2" holes, installed the rivenuts and it worked perfectly! That means 6 bolts on both bedsides holding the double wall top on, plus the rear holddowns at the tailgate area. Got the center top mounts and bolts ready to go. Still need to figure out the visor bolt area. Craig was here tonight, and we did a complete inventory of parts. He already has a design in his head for my rear bumper/spare carrier/jerry can mounts to kinda match my front bumper setup. I need to order up my new seats for the front and rear so we can design the cage mounts for the floor. Things are starting to move fast here, and it is about time! I just hope the money keeps up with the pace!
|
Re: My new build thread: Stage 4!
3 Attachment(s)
Hope everyone had a great Memorial day! We did, had a cookout with family and friends. It was really windy here, so I fired up the K5 and pulled it out so we could hang out in the pole barn. Got a couple pic's of my son in-laws jeep posing next to the house. 5.9 motor, dana60 frt, 14blt rear, riding on 44's. Other pic is of my Dad, Mom, and family enjoying the grub in the pole barn. Did some more brainstorming with Craig about my K5 and what he wants to do for me next month. CAN'T WAIT MAN!Attachment 1656673
Attachment 1656674 Attachment 1656675 |
Re: My new build thread: Stage 4!
Looks like tommorrow is the day the K5 goes up to MAYHEM GARAGE! Man, I can't wait to see what happens next. Got the new jerry cans and holders today, very nice. YES,YES, YES!
|
Re: My new build thread: Stage 4!
Got the new cans out and cleaned all the stickers off with some wd40. Very happy with this purchase, holders may need some fab work to mount up to new rear bumper. Need to mount the spouts yet, but these are the real deal man!
|
Re: My new build thread: Stage 4!
2 Attachment(s)
|
Re: My new build thread: Stage 4!
4 Attachment(s)
Well today was the day! Drove the K5 the 3 miles up to MAYHEM GARAGE.Hauled all the replacement metal panels also. Wife rode with me and it was awesome! Craig allready has ideas for the rocker panel areas and it looks like we are going a different route-other than just replacing stock-weak setup-to heavy duty bracing in this area. It was almost like a overhaulin moment, our baby is gone from the pole barn. But, it is on to stage 5! There will be many updates along the way, and pic's for sure! Bring on stage 5! Couple of pic's!Attachment 1658211
Attachment 1658212 Attachment 1658213 Attachment 1658214 |
Re: My new build thread: Stage 4!
5 Attachment(s)
After reveiwing the new jerry can mounts, I went down a different path. Ordered up some different ones and they came today. Way better, And should be good to go with my fabricator-I hope! Got some pics of the 1st ones, and the ones I want to go with.Attachment 1659041
Attachment 1659042 Attachment 1659043 Attachment 1659044 Attachment 1659045 |
Re: My new build thread: Stage 4!
3 Attachment(s)
Made a trip out to MAYHEM today. Got a few pic's of the rocker area ripping!Floor area and rockers are coming along on the passenger side. Attachment 1662067
Attachment 1662068 Attachment 1662069 |
Re: My new build thread: Stage 4!
Cutting and chopping This K5 will never be STOCK again!
|
Re: My new build thread: Stage 4!
Craig is making good headway on the rocker area on the passenger side. Got the floor cut out and ready to weld in the new panels!New floor panels will be good to go! Got all the heavy duty metal to replace the wimpy stock rocker boxes!! No pic's for now, but soon!
|
All times are GMT -4. The time now is 09:53 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com