The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1947 - 1959 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=13)
-   -   What Did You Do With Your Truck Today ? (https://67-72chevytrucks.com/vboard/showthread.php?t=486137)

danheit 08-28-2012 10:10 PM

Re: What Did You Do With Your Truck Today ?
 
Built my rear body mounts for the new frame. Just need to work out my fronts and I am on the short track to being on the road!

oldcouple 08-29-2012 12:33 AM

Re: What Did You Do With Your Truck Today ?
 
Figured out why my brake lights were not working, the original switch had died. How did one person install that thing? Had to grind off the screw heads inside the cab and drive it out, will put the screws in from the bottom and add nuts to the inside. Duct tape to the rescue to hold it in place till I can bolt it down.

Daze57 08-29-2012 12:43 AM

Re: What Did You Do With Your Truck Today ?
 
workin on dem dar relays to hookin up my sidewinder 'lectric fan - boy does dat pull some air in !

pvienneau 08-29-2012 06:36 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
Did my first weld job for the drivers side corner bracket that supports the seat frame on my 49 project. Lots of grinding and making holes. All in all I think it is strong but not pretty.

OrrieG 08-29-2012 08:10 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by oldcouple (Post 5563505)
Figured out why my brake lights were not working, the original switch had died. How did one person install that thing? Had to grind off the screw heads inside the cab and drive it out, will put the screws in from the bottom and add nuts to the inside. Duct tape to the rescue to hold it in place till I can bolt it down.

Hot glue, holds it in place but peals right off. Wife taught me that.

OrrieG 08-29-2012 08:11 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by arturo7 (Post 5559497)
Went downtown for a couple cold ones. Showed some buddies pics of my truck. They all laughed. A lot.

I''ll show 'em...

Bet they drive Honda's, Toyota's and Suburus????

Chevette 08-29-2012 08:16 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Russell Ashley (Post 5556894)
I put a new latch and stricker plate on my drivers side. I also re-painted the door panels while they were off to correct the hurry-up job I did the first time.

Then I actually used it. I went to Lowes and got a dozen bags of bark chips

Russell: Your truck looks great! The wheels and wide whites really suit your truck. Very Cool.

la hi 08-29-2012 08:39 PM

Re: What Did You Do With Your Truck Today ?
 
I added a front sway bar to the 57 chevy. I will add the rear tomorow. Then I will look at the tracton master and see if I need that.

Russell Ashley 08-31-2012 05:40 PM

Re: What Did You Do With Your Truck Today ?
 
1 Attachment(s)
I installed my compressor and alternator mount. It moves the alternator to the drivers side and mounts the compressor where the alternator used to be. The compressor lines up with the crank and water pump pulleys but it looks like I will need a water pump pulley with an additional groove to make the alternator belt work.

Daze57 08-31-2012 10:11 PM

Re: What Did You Do With Your Truck Today ?
 
Originally Posted by arturo7
Went downtown for a couple cold ones. Showed some buddies pics of my truck. They all laughed. A lot.

I''ll show 'em...


no offense sir but ask your buddies if they even know what they are lookin at !

arturo7 08-31-2012 10:32 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Daze57 (Post 5568456)
no offense sir but ask your buddies if they even know what they are lookin at !


It was all in fun, and no, they had no idea.

waybad 09-01-2012 09:19 PM

Re: What Did You Do With Your Truck Today ?
 
put new motor mounts in, bent the pan.... took the pan off.. fixed the dent..new gaskets,,,
leaked like the there were no gaskets,,, bought more gaskets,,,,, installed the gaskets to the block!!!!!! no leaks..whew!!!(YES).... fix one problem,,,,, create new problem,,, all in a LONG DAYS work... URGH>>>>>>>>>>>>>>>>>>
then check craigslist,,,, free Avalanche seat!! big time score!! hopefully?????

Docs fitty6 09-02-2012 01:30 PM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Fuel filter/pump and fuel lines w/press. gauge done, B&M ratchet shifter done, E-brake..done, fenderwell headers 'almost' done, wiring done, upholstery done, steering done, suspension done, radiator connected and filled, oil in engine and used an old dizzy drive to convert to a priming tool and primed the engine. (will do that again prior to fire up and break in). Put a newer, longer tranny fill tube in as well. Had to resort to 195-45 15 tires to clear the headers!
Bleeding the brakes is next and then a bit of exhaust work...should get me to the point of firing it off.
later

lowdownstar 09-02-2012 05:47 PM

Re: What Did You Do With Your Truck Today ?
 
I installed my flow masters today and the truck sounds great to bad my wife asked for a divorce, and left me.



Ray

nvrdone 09-02-2012 11:44 PM

Re: What Did You Do With Your Truck Today ?
 
Got the brakes fixed & took it to a local show. First time on the road in about 8 years. Sure felt good.

Russell Ashley 09-03-2012 07:49 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by lowdownstar (Post 5570984)
I installed my flow masters today and the truck sounds great to bad my wife asked for a divorce, and left me.



Ray

I'm sorrry to hear that, Ray. I hope you can get things worked out.

Docs fitty6 09-03-2012 09:36 AM

Re: What Did You Do With Your Truck Today ?
 
low downstar..keep your head up Dude, and the shiny side of your truck too!
Been married 4 times...there's always someone else out there. Lifes' short...keep movin forward.

lowdownstar 09-03-2012 10:46 AM

Re: What Did You Do With Your Truck Today ?
 
Thanks guys it's been very hard, we had been together for 28 years. We have two kids thank god they are not babies, that would of killed me.

Now i don't even want to work on my truck, i don't know if i'll be able to keep it!!!





Ray

mknittle 09-03-2012 10:52 AM

Re: What Did You Do With Your Truck Today ?
 
[QUOTE=lowdownstar;5570984]I installed my flow masters today and the truck sounds great to bad my wife asked for a divorce, and left me.

Ray

Sorry to hear that Ray! At least the truck sounds good.

Indian113 09-03-2012 10:52 AM

Re: What Did You Do With Your Truck Today ?
 
Speaking from expierence working on my hotrods kept my mind straight when I went thru my divorce. I had to do something to keep me sober and out of trouble. Step back and take a breath,you have a lot of friends here and they will help you thru some tough times.

mknittle 09-03-2012 11:28 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by indian113 (Post 5572108)
speaking from expierence working on my hotrods kept my mind straight when i went thru my divorce. I had to do something to keep me sober and out of trouble. Step back and take a breath,you have a lot of friends here and they will help you thru some tough times.

x2

Rude Dude 09-03-2012 11:38 AM

Re: What Did You Do With Your Truck Today ?
 
I feel for you, been there and done that it gets better. Now I have a the most wonderful person in my life that words can't explain that is her on my the back of my bike in AVTR.:ito:



Quote:

Originally Posted by lowdownstar (Post 5572096)
Thanks guys it's been very hard, we had been together for 28 years. We have two kids thank god they are not babies, that would of killed me.

Now i don't even want to work on my truck, i don't know if i'll be able to keep it!!!





Ray


lowdownstar 09-03-2012 11:44 AM

Re: What Did You Do With Your Truck Today ?
 
I can't thank you guys enough for all the kind words an your help! it means a lot to me!

Thank you


Ray

Jyman 09-03-2012 12:11 PM

Re: What Did You Do With Your Truck Today ?
 
Hey Ray,

Sorry to hear about the divorce, are you afraid your going to lose the truck to your wife or are you thinking your going to have to sell it.

because you could always give it to one of your kids.

Daze57 09-03-2012 01:25 PM

Re: What Did You Do With Your Truck Today ?
 
sorry to hear whuts goin on ray - as stated before from other gents here---- keep your head up - deep breathes and hang in there - i know its easy to say -but you do have friends on this site .

waybad 09-03-2012 02:55 PM

Re: What Did You Do With Your Truck Today ?
 
Ray,
when I got mine a friend told me,,
in 6 months you will have a hole new set of problems....
and he was right,,, take one day at a time,, one door closes
and one opens,,, just have to walk through it... take care!!

Hot Rod Todd 09-03-2012 10:25 PM

Re: What Did You Do With Your Truck Today ?
 
Today our 48 went for certification.

Down here in New Zealand we have an extremely comprehensive set of rules to modify vehicles within. Back in around 1991, our Government was looking at restricting our automotive freedoms, so the New Zealand Hot Rod Assn talked with Government and said they would develop some standards, and then police them on the Governments behalf.

The bunch of volunteers did a great job and we have a well established system here now.

In a nutshell, if you modify anything significant, you go to the certifier (all are hot rodders) and he/she inspects it (for about $400) and approves it and sends the paperwork off and you get a "cert plate" affixed to your vehicle. So then if you get stopped by the Police, they check your car and if its mods are in line with the cert plate, then there are no issues.

The cert for a full scratchbuilt car about $750.

So today my car goes in for its certification. It was certified for the Jag suspension and the Chev 6 about two years ago, so now the 350/700R4 conversion, plus the burstproof doorlocks and the seatbelt mounts are getting certified too.

If you want to know any more about our certification system, look here:
http://www.hotrod.org.nz/Merchandise...cal_Manual.htm

Our system has keep Government do-gooders and other interfering politicians at bay for over 20 years now. Threes even talk of it being used in some other countries where politicians think that modified vehicles are the spawn of the Devil.

Hot Rod Todd 09-03-2012 10:36 PM

Re: What Did You Do With Your Truck Today ?
 
Ray, sorry to read of your situation.

From other experience I can tell you theres not much to gain by worrying about stuff you cant change, and there not much to gain by worrying about stuff thats still a bunch of "maybes", "possibilities" and "what ifs"

The situation regarding your truck is like that: you worry that you may lose it, but theres a lot of water to go under the bridge before anyone talks about assets an who wants what.

So get out to the shed and enjoy working on your truck. It will help keep your mind off your situation with your wife.

lowdownstar 09-04-2012 06:34 AM

Re: What Did You Do With Your Truck Today ?
 
you guys give great words of wisdom, and yes if i could stop thinking about all the what ifs i know i would feel better but its so hard to do.... I am trying to keep my mind busy with everything i have to do, but the truck is the last thing right now i have two boys to keep going. Thanks again for everything guys this forum is full of very nice and caring people.

Thanks Ray

mknittle 09-04-2012 10:22 AM

Re: What Did You Do With Your Truck Today ?
 
Worrying never is a good thing, you can come up with 1000 solutions and when it is all said and done none apply. and in retrospect it never is as bad as you thought.

lowdownstar 09-04-2012 11:31 AM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by mknittle (Post 5574020)
Worrying never is a good thing, you can come up with 1000 solutions and when it is all said and done none apply. and in retrospect it never is as bad as you thought.

You are so right! but it does feel like hell in the moment...


Thanks Ray

Dan in Pasadena 09-04-2012 12:43 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by lowdownstar (Post 5574122)
You are so right! but it does feel like hell in the moment...


Thanks Ray

Been there, done that. Divorced from my highschool sweetheart after 20 years. Kids were I think 16 and 17 at the time. I thought I'd never get over it. I did. You will, it just FEELS like you won't right now. Give yourself time, allow yourself to grieve but don't wallow. And whatever you do, do NOT decide you're in love with the first woman that lets you in her life/bed.

My kids are 30 and 31 now and we are very close. Do right by your kids in all this, continuie to be the role model for decent and resonable, and they'll remember who did what, who said what? Best of luck.

lowdownstar 09-04-2012 04:05 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by Dan in Pasadena (Post 5574217)
Been there, done that. Divorced from my highschool sweetheart after 20 years. Kids were I think 16 and 17 at the time. I thought I'd never get over it. I did. You will, it just FEELS like you won't right now. Give yourself time, allow yourself to grieve but don't wallow. And whatever you do, do NOT decide you're in love with the first woman that lets you in her life/bed.

My kids are 30 and 31 now and we are very close. Do right by your kids in all this, continuie to be the role model for decent and resonable, and they'll remember who did what, who said what? Best of luck.

Thank you that is great advice and your right as well about the kids! They are my world...

Thanks ray

arturo7 09-04-2012 07:35 PM

Re: What Did You Do With Your Truck Today ?
 
Added a bellhousing and front motor mounts to the parts inventory.

mknittle 09-04-2012 08:24 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by arturo7 (Post 5574842)
Added a bellhousing and front motor mounts to the parts inventory.

one oiece at a time. one step closer!:metal:

mknittle 09-04-2012 10:12 PM

Re: What Did You Do With Your Truck Today ?
 
I finished my seat mounts and tried the electrolysis method of rust removal. it worked pretty good for half hearted attempt.Just an experiment. it's cool to be working on somthing else while the parts were derusting:smoke:

pinecrest 09-04-2012 10:33 PM

Re: What Did You Do With Your Truck Today ?
 
Engine mounts tacked in. Getting closer to trying to turn this thing over.

mknittle 09-05-2012 07:20 PM

Re: What Did You Do With Your Truck Today ?
 
3 Attachment(s)
the new seat mounts

OrrieG 09-06-2012 12:23 PM

Re: What Did You Do With Your Truck Today ?
 
2 Attachment(s)
Cleaned up and painted the VA unit. Used SEM made for plastic panels. Color matches the steering column and seat leather.

OrrieG 09-06-2012 12:24 PM

Re: What Did You Do With Your Truck Today ?
 
Quote:

Originally Posted by mknittle (Post 5576617)
the new seat mounts

Look nice and clean, just like GM would have done.


All times are GMT -4. The time now is 02:23 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com