![]() |
Re: Shawno72's long overdue 68 daily driver build thread
Ok guys I have run into a snag with the disc brake install. I installed the POL Disc brake conversion front hard line set and it fits pretty good. I got the CPP disc brake front conversion hoses from a board member and the hose ends are larger than the line ends :( my question can I go with a set of factory stye 71-72 front brake hoses?
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
I told him to align it as low as possible. He did the best he could at keeping it low,... but I would have liked a lower ride height. That's really what a Dropmember is for. LOW ride heights! |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
The 71-72 hoses have two different size hose fittings. (thats the way they were from the factory) So you would still need an adapter on one side. I used the ECE conversion hoses on my red '69. They are a direct bolt on. I have extra long 73-87 hoses on my blazer, so it doesn't stretch the brake line so tight when air'd out. But they require an adapter also. I got my inverted flare adapters at my local ACE hardware store. |
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
You need the "tube" adapter.
http://www.oreillyauto.com/site/c/se...1164/C0248.oap |
Re: Shawno72's long overdue 68 daily driver build thread
Thanks Keith I am checking into that now!!
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Slam Specialties bags have a huge port size, (3/8"npt or 1/2"npt), that requires a pipe thread bushing to reduce down to my PTC air line fitting. I think I used a uni-bit up to 3/4" and then cleaned up the hole with a 7/8" standard drill bit with a 1/2" reduced shank. |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
:lol:
|
Re: Shawno72's long overdue 68 daily driver build thread
Ok so I bought a set of the 4x4 front brake hoses from Oreillys and they fit like a glove and are longer for the aired version thats coming :metal: Anyone else ever tried this?
|
Re: Shawno72's long overdue 68 daily driver build thread
Part numbers?
71-72 4x4 application? |
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
Quote:
I still need to figure a sanitary way to mount them to the lower A arm. Any ideas? Attachment 1084783 |
Re: Shawno72's long overdue 68 daily driver build thread
5 Attachment(s)
Some more progress, check out how short the PO cut the stock coils. That's my 3" drop coils next to them.
Attachment 1084785 Attachment 1084786 Attachment 1084787 Attachment 1084788 Attachment 1084789 |
Re: Shawno72's long overdue 68 daily driver build thread
2 Attachment(s)
|
Re: Shawno72's long overdue 68 daily driver build thread
Must be nice to have a lift and your own alignment equipment available to you.
You're killing your mods one by one! |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
5 Attachment(s)
And some pics of the finished product. The front ended up much lower than I really expected even though it was right on with Keiths red truck. It dropped an additional 1 1/2" :D I think the brakes may still have some air but we ran out of time so I'll have to bleed them some more. I forgot to tighten that little tiny plug on front of the prop valve :dohh: Oh has a super nice stance and with 7" in wheels all around I am gonna just roll it for a bit......then maybe a drop member?? ;)
Attachment 1084872 Attachment 1084873 Attachment 1084874 Attachment 1084875 Attachment 1084876 |
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
Looks good.
The stance is perfect! The 4x4 hoses have a through frame connection just like the 73-87 hoses. I think there should be a nut on this hose to mount it solid to the bracket. How close are your a-arms to the ground? You might have to learn how to drive it differently. Watch out for potholes in the road! |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
looking good Shawn
Posted via Mobile Device Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Looks great buddy! The stance is perfect.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
OUTSTANDING!! Oops, sorry, didn't mean to yell. :lol: Looks great Shawn!
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Nailed the stance!
|
Re: Shawno72's long overdue 68 daily driver build thread
Nice fix with the 4x4 brake line!!!
Posted via Mobile Device |
All times are GMT -4. The time now is 05:01 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com