![]() |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
I couldn't be happier. Three guys showed up this morning, we mounted the cab, and then the primary paint dude and I spent the next 12 hours building the body today. I'm real impressed with this guy, he led most of the day.
We have a few minor adjustments left, but basically got her done. I finished the day torquing the body mounts to minimum. and that didn't change a thing, we're square and level too. Next up are the inner fenders, mount the bed, and mark for all the moldings. Then we blast her apart for paint:chevy: There are going to be three guys working on the body and paint. My buddy, his brother and friend. They all work at the same shop. I suspect I may actually be done last next year or early the next:lol: 7-8 years I think:metal: Couple pics from today. And yeah Grumps you were right. All those body measurements I took before I tore the truck down was a wasted effort:lol::lol::waah: |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
A few custom touches with my dimple dies and bead roller.
C10ETC Instagram |
Re: What did you do to your truck today.The 3rd chapter
Looking good. Nice custom touches.
-klb |
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Got some 15x8 rallies from a fellow C10-er in Idaho. Painted them last week (Ochre) to match the accent stripes and interior. Installed = satisfied me.
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
A shout out to Daniel Stern Lighting for hooking me up with my new H4 headlamps.:metal:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Worked on building a cab cart that will also tilt forward for access to roof and floor bottom when needed. Cart will also have another extension off the back so it will hold a bed. The mounts are sleeved and will have clevis pins for raising and lowering if needed. In the future I will design a few other attachments that will sleeve in so I can mount a fenders, bedside, hood, etc for painting or body work.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Been searching forever to find an original tach cluster for my '69 C10.. FINALLY found one. Came out of a '71 C60 and even has the air pressure gauge! The guy was thinking on scrapping the heavy hauler since he hardly had any bites and I'm so glad I stuck to it and got him to pull it and ship it to me. Once it arrived, I started pulling it apart and got everything cleaned up and needles repainted/straightened. Cleaning that lens was nerve-wracking! Sweating the whole time lol ..but it turned out good. Put lights in it to match the theme of my truck. I used the bezel already in my truck since the one it wore had a big crack on the bottom and around the other mounting holes. The only thing left to do is put in the tach harness this weekend and she's ready to rock to the show on Sunday!
|
Re: What did you do to your truck today.The 3rd chapter
Just out of curiosity, what is the air pressure gauge monitoring?
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Started building filler panels
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Slowly installing cab trim .
|
Re: What did you do to your truck today.The 3rd chapter
Today , I installed the center Ac vent and heater / Ac control . Wiring harness under dash and hook up to start soon. I am primarily test fitting everything . Will remove most of it to do wiring and then do my final install.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Topcoat on frame before & after. Swimming in deep water now!
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
That is a great idea. Boost gauge |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Fueled up and finished my new to me ashtray for paint
|
Re: What did you do to your truck today.The 3rd chapter
Well, I was going to finish tearing all the old wood and welded in angle iron out of the bed of my truck but after changing oil/filter and spark plugs in my little work car it was already 95 outside and the humidity is making it feel like 102.
Did blast the underside of one step and get it primed Friday evening. Slow going during the dog days of summer. |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Paint my grill after straightening some of the dents to the best of my ability.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
I got my brakes done and drove the truck up to Mickey D's...the exhaust was a bit loud for the kids in the drive thru...had to shut the truck off to correct the order:lol::metal: First time I've had the truck out on the street in about a year...felt real good!:metal: :cool: |
Re: What did you do to your truck today.The 3rd chapter
Well, after stripping a thread in the bowl on the Rochester B carb, I had hoped that a machine shop could put Heli-coil inserts in, but no...drilled and tapped the holes out to allow a 1/4-28 bolt, punched 1/4 holes in the gasket, and drilled out the choke cable flange to 1/4 inch, put it all together and I’m back on the road...for the time being.... I’m happy!
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Got my A/C straightened out . Evacuated the system added some lube and recharged with new r12 . Just hair over 3 lbs 81° out and its blowing 41°.
Also started disassembly of the 68s nose to get ready to take the cab off. Very little rust so far none on the floors just the RH rocker And on a side note some nice CAB Tomahawk Texas steak for dinner . |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Well I did find some holes in the passenger floor. Not alot but decided to cut out the thin areas and replace . Used my stretcher and shrinker for the first time today makes life that much easier
|
All times are GMT -4. The time now is 01:17 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com