Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning Mike and thanks for the prompt reply. I sent you a PM with the information about the swb trim set and the glove box door CHEVROLET trim plate. Thanks for the opportunity and please let me know if I can help you with these items or other good, used '60-'66 Chevy/GMC truck parts in the future.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning Joe and sorry for my delay in responding. I sold the real nice swb fleetside bed, that I had, but I have another very good, swb fleetside bed, but it has one blem over the wheel arch, at the back-brace and it has steel diamond plate installed under the flange. It was puddle-welded at the factory bolt holes and it was done very workman-like. I may drill out the welds and remove the diamond plate, but it would make a very nice bed for someone that doesn't have to have the factory wood & wear strips. I am flexible on the price, so please let me know your thoughts.

In any case, it is a complete bed, so I don't have any good, used loose swb fleetside bed sides, at this time.

Please let me know if I can help you with this item or other good, used '60-'66 Chevy/GMC truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sorry, like these? Upper left.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,

I'm still looking for a total for the cab sails mounting brackets including shipping to NC 28025. I'm sure it'll be more than reasonable so I'll go ahead and say I'll take 'em. Please PM me your address with the total so I can get you a money order, I don't do Paypal. I hope that's ok.

Thanks very much for your help.

Cheers,
Kevin

Re: Do you need '64-'66 Chevy Truck Parts?
 

Have any LWB fleetbed sides? :)

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the illustration. I don't have any GMC factory tow hooks, but I do have a few sets of the factory Chevy truck tow hooks. Sorry I am not able to help you with this item but please let me know if I can help you with any '60-'66 Chevy truck parts in the future and thanks for the opportunity.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Good morning Kevin and thanks for the prompt reply. PM sent.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. I have a few good, used pairs of lwb fleetside bed sides, but it may be cost-prohibitive to ship them to TX.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony do you still have your wall clocks with LILRED66 picture on the front ??? how much for that plus shipping to72712.. thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

looking fo a blower motor for a 60-66 c10. need it for my 47 heater box to up grade to 12v. the motor shaft is 1/4 the shaft length is 1-1/2 motor length is 3-3/4 motor dia is 3. the pic is what my 6v looks like. oh stud distance is2-5/16. the motor will be a two wire.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony,
Do you still have burb seats?
Thanks,
Joe

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Tony,

I need a rear license plate bracket for a fleetside. Got one?

How much shipped...87507.

Thanks! JC

Re: Do you need '64-'66 Chevy Truck Parts?
 

Lilred66 could you show me the difference in the Chevrolet tow hooks compared to the GMC?

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony how much for 64-66 steering colmn, steering wheel with it turn singal lever all there. for a automatic picture please and I would more than likly drive up there for pick up. thanks Morton

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hey Mort, I do have a few clocks of LILRD66. They are $18.00, including shipping.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry. A brand new blower motor for the 4-5-6 Chevy trucks is $19.95, plus tax from O'Reilly Auto Parts. That is your best bet. These motors are a single wire.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Sorry for my delay in responding. I have been hobbling around since Saturday. I wrenched my back trying to muscle around some trucks in my lot on Saturday morning, so I have been a slacker this week. I am torn on whether I want to sell the 2nd & 3rd row Suburban seats. I have a '62 GMC Suburban factory 4x4 that needs them, as well. Let me think about it and I will let you know what I decide to do. You will get first dibs!

Re: Do you need '64-'66 Chevy Truck Parts?
 

Thanks for the inquiry JC. A good, used factory fleetside license plate bracket is $40.00, plus 10.00 shipping.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Here is a photo of the Chevy tow hooks. They mount in the factory holes on the underside of the front frame horns.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Mort:

Thanks for the inquiry. Do you want a standard steering wheel & chrome horn button or a Custom steering wheel & chrome horn ring?

Re: Do you need '64-'66 Chevy Truck Parts?
 

standard steering wheel for a automatic every thing functional,hook up and go.

Re: Do you need '64-'66 Chevy Truck Parts?
 

Ill take a LILRED66 clock do you take money orders? pm me your address and Ill send you a money order. thanks Morton

Re: Do you need '64-'66 Chevy Truck Parts?
 

the crome horn button ring one.. price? thanks

Re: Do you need '64-'66 Chevy Truck Parts?
 

Tony, sorry I meet to say ( 64-66 steering colmn )with it too...

Re: Do you need '64-'66 Chevy Truck Parts?
 

Hi Tony, great service you provide here; glad I found this board!

Might you have some 15 or 16" steel wheels? I am shopping around for a good used set, and some new tires as well (can find them a lot easier than the wheels). Thanks in advance,

-Screws