Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
I dont think you need to do anything else with the height, it looks perfect. also, i think the nut for the brake hose is a 5/8-18 it may be 3/4-16. you can use a jamb nut for a much cleaner look than the factory 4x4 sheet metal nut. but, you will have to crack the line and re-bleed. a coated loom clamp on the a-arm will hold the hose nicely.
|
Re: Shawno72's long overdue 68 daily driver build thread
Thanks Ryan!! I plan to use a coated clamp and bolt for the hose.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Thanks Keith. I'll check out big Al's thread. I am surprised how much better the truck rides with the proper drop springs. It rode pretty good before but it rides so much better. Can't wait to do the rear bags
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Man that looks good Shawn!
|
Re: Shawno72's long overdue 68 daily driver build thread
Really, really nice Shawn! Like!
Have a blessed Easter and just try not to smile :lol: |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
Here are some pic's of big Al's truck if you haven't seen it yet
Attachment 1085132 Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
1 Attachment(s)
Attachment 1085133
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Nice that's what I'm talking about. The ride height of Al's truck looks pretty damn sweet and probably close to your current ride height Shawn.
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Mine will be the same ride height but lower aired out due to me running custom front inner fenders and raising the bed floor. Not all of us can afford all of the awesome porterbuilt parts ;)
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Shawn - the truck is looking great! Just wondering, its been a while since you put in the 700r4, been tracking the mpg? I'm still gathering parts for my swap but curious to know how positive the change was (besides driving comfort!)...
|
Re: Shawno72's long overdue 68 daily driver build thread
Looks great!
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Quote:
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Ok guys just one issue, I re-bleed the brakes and got a lot of air out. Pedal feels nice and firm but it feels as though there is no power brakes. Truck stops good but my easy toe stops are gone. Any ideas? Corvette master maybe?
|
Re: Shawno72's long overdue 68 daily driver build thread
Is the vacuum line hooked up to the booster?
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
Posted via Mobile Device |
Re: Shawno72's long overdue 68 daily driver build thread
Is the new master for discs or drums? sounds like the wrong master to me, should still have "toe stops" with the discs:confused:
|
Re: Shawno72's long overdue 68 daily driver build thread
Looks good!
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
Re: Shawno72's long overdue 68 daily driver build thread
Quote:
|
All times are GMT -4. The time now is 11:01 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com