![]() |
Re: 1965/73 Cheap Build Up
I believe the blue theme is a leftover scheme from an older version of the software that runs the board and has not had all the quirks worked out. There is a lot of changes in the software programming between this version and the older version that there blue theme was made with.
If that is not it, at least I sounded like I knew what I was talking about :lol: |
Re: 1965/73 Cheap Build Up
:lol:
I thought I smelled something |
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
1 Attachment(s)
Though your thread was lacking some ass. Can you still buy those vette bezels? I was thinking about stealing your idea and putting a couple on my truck. Think it would work on a fleetside? Maybe two on the same side?
|
Re: 1965/73 Cheap Build Up
those accessories look good on/from any side and in any vehicle
the surfboard should fit in the bed too |
Re: 1965/73 Cheap Build Up
Quote:
Here's a new one for ya. http://belair.smugmug.com/photos/664333999_pPTw2-M.jpg |
Re: 1965/73 Cheap Build Up
I actually got to do a little work on the truck today. I started to port the heads on the 350 motor. I got the exhaust ports done on one head, and primered the bare metal on the right side of the truck.
When I do porting I just clean up the ports and get rid of any sharp edges or bumps. I try to make them flow freely without opening them up. I'll also port match them when I get the gaskets. I also try to make them all feel the same with my finger gauge. I've done a lot of Chevy, VW's and motorcycles the same way. And it works. You can't over do it though or you can make less power. No pictures because there's not much that will come out good in a photo. Tomorrow I will have the truck back on the lift. Then I will make more progress. :metal: |
Re: 1965/73 Cheap Build Up
ive ported 3 sbc heads and a robin subaru 5hp head
im doing the same thing but i need some more cartidge rolls i dont like doing it but is TIME CONSUMING!! so how much of a difference does it make i havnt gotten mine on the road yet |
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
i am currently porting a set of 487s i have one pretty much done
|
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
Quote:
|
Re: 1965/73 Cheap Build Up
1 Attachment(s)
:haha::haha::haha:
Sure she does Mac..... |
Re: 1965/73 Cheap Build Up
:lol: You didn't! :lol:
|
Re: 1965/73 Cheap Build Up
1 Attachment(s)
Quote:
|
Re: 1965/73 Cheap Build Up
:lol::lol::lol:
|
Re: 1965/73 Cheap Build Up
Dave you couldn't handle her. :haha: :haha: :haha:
http://belair.smugmug.com/photos/494238274_5bvne-M.jpg |
Re: 1965/73 Cheap Build Up
let the nightmares begin
|
Re: 1965/73 Cheap Build Up
Stop it!!! I was going to eat some lunch. Now I'm not really hungry.:uhmk:
|
Re: 1965/73 Cheap Build Up
:exit: There is such a thing as TMA (too much......) :smoke:
|
Re: 1965/73 Cheap Build Up
:ack::ack:
|
Re: 1965/73 Cheap Build Up
:puke:
|
Re: 1965/73 Cheap Build Up
I'm delivering the 62 Impala body only tomorrow morning so the body shop can do the out side body work & paint. I'm done with the floor & trunk panel replacements, and rust repair. Next I do the frame.
The good news is I finely got the truck on the lift. Now to get the body set down in the back some more. Then restore the frame. Stay tuned. http://belair.smugmug.com/photos/661473030_HGPnP-S.jpg http://belair.smugmug.com/photos/661473198_Y6pou-S.jpg http://belair.smugmug.com/photos/661483019_diab7-S.jpg http://belair.smugmug.com/photos/661483192_hqhBj-S.jpg |
Re: 1965/73 Cheap Build Up
Nice work Dennis!!
|
All times are GMT -4. The time now is 02:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com