Re: D52 Caliper Rear Disc Brake Brackets
Quote:
I dont know where exactly to drill the hole or know anybody who can do that. I will see if I can find somebody local who can but if not I will contact you for refund then. I would rather have them work. |
Re: D52 Caliper Rear Disc Brake Brackets
Hey is there any way you can tell me what size hole, what size bolt goes into the hole and if the hole is supposed to go all the way through the caliper?
Maybe how long the bolt should be also? That would be great and I would appreciate the info and help. Thanks. |
Re: D52 Caliper Rear Disc Brake Brackets
The allen socket bolts included with the kit are for attaching the cable brackets to the calipers. They are 5/16"-18 x 3/4" bolts. That is why I previously said that you need to drill and tap 5/16"-18 holes to mount the cable brackets. The tap drill size is a F drill. If you do not have one of those a 1/4" drill is .007" smaller. Yes the hole should go all the way thru the outside of the caliper. There is nothing exact about where the cable brackets can be attached. Look at the pics on page 15 and you will see where they need to be placed with the large hole centered over the slide bolt. The pin is sup[posed to be up against the side of the caliper to keet the bracket from rotating. They do not have to be exact.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
On page 15 you mention cutting the extra nubs off calipers in order to make the E-brake brackets function properly.
Both my calipers have that extra nub. Do I need to cut the nubs off my calipers in order to make the E-brake brackets work or did you change your design so that modification is not required? |
Re: D52 Caliper Rear Disc Brake Brackets
If the levers hit the 'nubs' on your calipers, you will need to trim them so that you have hull range of travel of the levers.
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment sent for your D52 setup with powder coating. Thanks!
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment received. Thanks :)
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Purchasing powder coated 67-72 brake booster bracket, and d52 disc brackets also power coated. Thanks
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment received. Are you aware of the current lead time on building and shipping orders?
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
The current lead time on building and shipping orders is 14 days.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
I would like a set of the D52 brackets.
|
Re: D52 Caliper Rear Disc Brake Brackets
Payment received. Thanks
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Does anybody know if adjusting a Cadillac Eldorado 1976-1978 rear brake caliper is the same process as adjusting the more common 1979-1985 Cadillac Eldorado rear calipers?
|
Need some help. I got the captfab rear brake kit , it’s been put on and when I went to put my stop tech rotor on the problems began. So advice is welcome here. The rotor hat seems to small to go over the brackets .... then the rotor hat depth seems to large to me at 3in ... because with a tape measure I’m at 3in with the axle flange to caliper bracket... so I’m starting to think that these are boxed wrong...
Posted via Mobile Device |
Re: D52 Caliper Rear Disc Brake Brackets
Quote:
Thanks! |
Re: D52 Caliper Rear Disc Brake Brackets
Sorry but no I have not made any progress on any new rear disc conversion brackets. I am still working 80hrs/7 days a week every week every month......no days off. So I just do not have any extra time. I keep trying but something always comes up and prevents me from developing new parts that I have been talking about for years.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
Thanks Capt. I fully understand this is just one of the ways you earn a living and not the most profitable I imagine. No worries. I still need to decide what I am going to do anyway. I am in no hurry.
|
Re: D52 Caliper Rear Disc Brake Brackets
Just bumping so I can find this later.
|
Re: D52 Caliper Rear Disc Brake Brackets
I literally made an account just for this kit years ago.. right now my truck is on the air for a T.C.I. 4-link so this is a very good opportunity to finally purchase what I've had on my waiting list for so long. If possible I would like to purchase this kit in bare metal as well as the parking brake bracket and spring kit. I am in no hurry as Michigan winter is coming.. my truck isn't going anywhere for a while so lead time is no issue. I can provide a PayPal address when requested.
|
Re: D52 Caliper Rear Disc Brake Brackets
PM sent.
|
Re: D52 Caliper Rear Disc Brake Brackets
Paypal sent what's the timeframe? Got everything else ordered for this.
|
Re: D52 Caliper Rear Disc Brake Brackets
A PayPal invoice is required when paying with either PayPal or your credit card. Currently building and shipping orders is out 14 days.
Quote:
|
Re: D52 Caliper Rear Disc Brake Brackets
I would like to get a set of your D52 brackets payment on the way.
Thanks. |
All times are GMT -4. The time now is 10:54 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com