Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Chatham Dockyard with Medway Cruise again last night.

I am sadly seeing the demise of this awesome gathering, with it getting banned or moved as it is so oversubscribed and very badly managed in my non expert view.......

It used to be a gathering that had up to 150 cars just gather, but last night there was just no rhyme nor reason for who could park where etc...... I prefer a totally mixed show, with no groups etc, but fail to understand what exactly the modus operandi is now.

Also needs to root out idiots like the guy in the TVR doing a burnout in the car park.

Still, it is always a great evening out, with an amazing mix of stuff, Harley's to Vespas and Lambrettas, Anglias to Mk1 Golfs and everything a rodder could dream of in between.

I selectively took about 60 photos, and have reduced them to 10.

German 2.6 Injected Capri.

http://i294.photobucket.com/albums/m...pslrojrjue.jpg

Flat out on air C10

http://i294.photobucket.com/albums/m...ps6vatax0p.jpg

This GMC is really hand crafted......... Built on a Winnebago chassis with Big Block motorvation and a drag car on the back, what's not to love.

http://i294.photobucket.com/albums/m...pspsaayhfz.jpg

Being our wedding anniversary, what better treat for Nicola than a car show (after all, we spent our honeymoon 5 years ago at the Retro Rides Gathering too)

Nicola showing Martin the love.

http://i294.photobucket.com/albums/m...ps8ucmosbn.jpg

Nice Ford.

http://i294.photobucket.com/albums/m...psx9z69b6h.jpg

Evergreen Rover.

http://i294.photobucket.com/albums/m...ps02sjafh6.jpg

Bought a week ago, he did not stop grinning.

Load bed in metal flake with some candy skull artwork on the bedside.

http://i294.photobucket.com/albums/m...pstayvy2hp.jpg


Spotless and for sale.

It seems that trucks are really going up in popularity right now, let's hope the bubble does not break any time soon.

http://i294.photobucket.com/albums/m...psef0kf5ds.jpg

Moggy.

http://i294.photobucket.com/albums/m...pstehililf.jpg

105E Anglia, I had one years ago, loved it.

http://i294.photobucket.com/albums/m...psc3zno3ya.jpg

Here's to another good one next month.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

:metal:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

I managed to find another of these 2 ton pallet trucks at the yard for Ian Brown up north for silly money this week after he asked me to keep an eye out for one.

Amazingly, I have a 320 BMW sedan as work car, it cannot carry the pallet truck, yet, Nicola's Peugeot 107 was up to the task tonight when I went to collect it at the yard and bring it back.

http://i294.photobucket.com/albums/m...psw07ezlpg.jpg

Funny how things go.

Yesterday there were 8 of these 2 ton pallet trucks delivered as scrap to the yard, some of them work, and some needing minimal attention, one was brand new....... I never get that.

http://i294.photobucket.com/albums/m...pshjavcy1t.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Well, a lovely day it has been.

Up early, loads of "Honey do's" around the house, then cut grass, cut some plants back, followed by clearing in front of the garage, and unpacking the caravan shed to get to some of my glass blasting media, which typically was stashed under the beds, under many parts.

Moved the bike up to the house, pushed the truck up,the drive, and got the compressor started, connected to the blasting cabinet I bought last year, filled it with about 35kg of crushed glass, the. Got started with parts of the heater unit, mirror stalks, followed by various other bits.

Inbetween I had a few problems, including the humidity causing the nozzle to clog up, the compressor feed pipe springing a small leak and the viewing window getting progressively more invisible.

By the end I really could not see what I was doing.

Any advice on how to retain visibility, that is not just the dust, but dulling of the plastic as well...... How do you keep visibility up to something sensible??

Ready to start.

http://i294.photobucket.com/albums/m...psw5npifue.jpg

First piece, getting it ready for Ian Brown to Pinstripe over winter when he settles down.

http://i294.photobucket.com/albums/m...psntm5q5ur.jpg

http://i294.photobucket.com/albums/m...ps92ufpida.jpg

http://i294.photobucket.com/albums/m...psvjeaqoxw.jpg

Also did these little guys from the tailgate while I was at it.

http://i294.photobucket.com/albums/m...psopcpedee.jpg

All primered...........

At this point one of the cans of red oxide primer stopped working halfway through and I will be wasting a half a can of red oxide....... Really gets to me.

http://i294.photobucket.com/albums/m...pswlcl92mv.jpg

At this time, Mickey from next door came around to take a look.

He seemed pretty happy with what I was doing and suggested I could carry on.

http://i294.photobucket.com/albums/m...ps1skjezzj.jpg


So I carried on and eventually finished all the pieces.

The heater parts are all Satin Black, and the rest, including the engine mounts and their nuts n bolts were made Gloss Black.

Next job is to enlarge the bottom hole by about 4mm all the way round to fit the Mazda MX5 blower and controls to the heater unit.

http://i294.photobucket.com/albums/m...pslbjwahub.jpg

After packing everything away, I cleaned up, then took Nicola out for a wedding anniversary dinner in town.

Tomorrow it is off to the Hotrod show, hopefully to meet up with some friends, buy some stuff, trade some stuff and generally have a good day in the sun.

Hope to get really lucky and find a radiator too.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Looks good. Hope the chow with the boss was good too!

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Looks like a good day's work put in...:mm:

Hope the evening out with Mrs.Boss was beyond enjoyable...;)

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Hi Grizz,
Just want to say I've been really enjoying your thread and the work you're doing.

On my blast cabinet I use these clear film protective lenses that tape to the inside of your cabinet glass:
http://www.tptools.com/Cabinet-Inner...rotectors.html
When they get dull and scratched just pull them off and replace with another.

Also, this vacuum system works well for me:
http://www.thegaragegazette.com/index.php?topic=65.0
The dust trap really helps to prolong the life of the shop vac.

Hope this helps and keep up the great work.

Denny

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

A busy but productive day! (and an even busier one today no-doubt :lol:). The part turned out really well :metal:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Magnificent dinner, thank you, despite the pint/500ml beers being £5.00/$7.50
Fortunately I rarely drink outside of home and Nicola in principle has tap water ;)

Most definitely Don, was a great day.

Your first post since registering in 2012 Denny, thank you very much for looking in, but even more importantly, thanks for the guidance. I will get some of those, and do not have a shop vac, other than an old bagged vacuum cleaner, so may look at that too.

Ohhhh yes it will be Ian.

Going to a Bootfair now, then off to the north.

See you later.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Looks like you had a great sandblasting session Rian. The parts came out looking great. I hear you on the rattle bombs giving up. I hate it when that happens on a brand new can. The quality of them has gone down hill in the last 10 years! I still own rattle cans from the early 90's that still work!

Interested in how you fit the Mazda parts.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Indeed Bret, what gets me is that we pay for a full can, returning it often costs more than the value of the item.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Well, another good weekend has come to an end.

Today started with a very result filled Bootfair, then it was up to this.........

http://i294.photobucket.com/albums/m...psoa0aqmoa.jpg

Nicola and I had planned this day for some time and were not disappointed.

Met up with a few friends, including Ian brown, Del and son Sam from Romford, Adrian from Milton Keynes, all C10 guys.

I also met up with Andy from Norfolk to buy some Dinitrol cavity wax that was left over from his International truck build, another nice guy with a good wife.

I decided to actually enjoy the show a bit myself with Nicola today, so only took a few random photos of 60-66 Chevy/GMC's in C10 format.

http://i294.photobucket.com/albums/m...psbnmlodbt.jpg

http://i294.photobucket.com/albums/m...pskr9mkqsi.jpg

http://i294.photobucket.com/albums/m...ps2hpo2jc3.jpg

Del and son Sam were over I his Stepsise that he is turning into a full Patina looker.

http://i294.photobucket.com/albums/m...psfybbmog0.jpg

http://i294.photobucket.com/albums/m...ps0fjm8sxo.jpg

http://i294.photobucket.com/albums/m...psuwacsdg0.jpg

Adrian's truck, he fitted new rubber and wheels yesterday, I really love this look.

http://i294.photobucket.com/albums/m...pswmmejqf7.jpg

Mick, who I did not meet's truck with lovely Extang tonneau cover.

http://i294.photobucket.com/albums/m...psi0swbgll.jpg

I want one of these Tonneau covers for my truck as well.

Just need to figure out which model and size will fit it correctly.

http://i294.photobucket.com/albums/m...psyonrdvxx.jpg

Beauty of the day. Pretty bloody good I say.

http://i294.photobucket.com/albums/m...psxwblvaq4.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Today at the NSRA I collected four litres of Dinitrol Cavity Wax for the truck that I had bought via Rods n Sods, thanks to Andy for bringing it down from Norfolk.

http://i294.photobucket.com/albums/m...psqlbk9rhg.jpg

Walking around the traders stands, Martin with his ever alert eagle eyes clocked a pair of flywheel covers which we both needed.

£15.00 later and I now have a cover in chrome.

http://i294.photobucket.com/albums/m...pshr8zswmu.jpg

Today Martin and I also got to meet up with Ian Brown, owner of the Tennessee Honey C10 Stepside.

Ian had given me a lower A-Arm to replace mine which has been damaged sometime in the past, already cleaned up and painted.

Thanks Ian !!

http://i294.photobucket.com/albums/m...psdy55vv9v.jpg

Secondly, Ian had also brought along both of his trucks old front hubs, all neatly wrapped up.

Thanks again mate.

http://i294.photobucket.com/albums/m...psd4yzw5ef.jpg

So again, not a lot of work done, but truck progress.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

looks like I missed a good show, but it was my daughters birthday party this weekend, ones 10 and the other 14, 1 day apart, so big joint party for them on Saturday.

The cream patina C10 with black wings is from up this way, it's what got me into american trucks.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Looks like a fun day mate…:metal:

Thanks for sharing...:mm:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

wow, looks like big fun. i really liked the carryall too with all the custom chrome. thanks for the pics...

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Family time always comes first.

I think we have about 140 selected photos, but I have stopped posting as few people seem interested, and it takes time.

Pleasure Clem.

I was pleased to see so many.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

This is a tutorial on how to fit a Mazda MX5/Miata heater fan to the Custom Deluxe heater unit in a 60-66 Chevy C10.

The blower motors on these often stop working after 50 years when the radiator core leaks and the water ends up over the motor.

My mate Martin previously investigated and executed a transfer on his '65 Chevy truck as he had owned a few, and broken even more Mazda MX5's in the past, so he knows his way around them quite intimately.

So when I managed to buy an unproven heater unit from friend Del and the motor as expected, had expired we arranged to go to a breakers early one Saturday morning. We even stopped for a McD's Coffee on the way.

Got to Brenzett to the Mazda MX5 breakers where we had been offered a fan and blower unit for sensible money....... If we removed it ourselves. Martin and I have previously used him before and his stock and prices are always good.

So I was the tool boy, and Martin the brains and brawn on the day.

Spending about 30 minutes, mostly upside down.....

http://i294.photobucket.com/albums/m...pspnyoqw3x.jpg

RESULT !!!


http://i294.photobucket.com/albums/m...psjhthfya5.jpg

So I dismantled the heater unit and,sandblasted it all, painted all the parts after pressure testing the core by mouth, and it seemed to be intact.

http://i294.photobucket.com/albums/m...pslbjwahub.jpg

If you test fit the Mazda fan on the Chevy tinwork, you will find it is too big by a small margin. So the trick is to figure a way to get it inside the hole.

http://i294.photobucket.com/albums/m...pshrmsjsws.jpg

The fan is plastic, and herein lies the secret.

If you put a bit of pressure on opposite sides it becomes oblong and you can slip it into the steel hole, releasing as it goes in means it will be captive on the inside.

http://i294.photobucket.com/albums/m...ps0iwtumet.jpg

Impressed??

http://i294.photobucket.com/albums/m...psm9vppxyv.jpg

Using masking tape, mark out the hole that needs to be cut in the body to fit this little guy.

http://i294.photobucket.com/albums/m...psaizbf3oc.jpg

Drilling a pilot hole in every corner gives you radius end corners and prevents the metal tearing over the long term.

http://i294.photobucket.com/albums/m...psxbazuf5z.jpg

Cut with the grinder and finish off with a hand held hacksaw blade and file all the edges, and touch up the paint on the exposed metal.

http://i294.photobucket.com/albums/m...psoupxwvbj.jpg

http://i294.photobucket.com/albums/m...psikcr8iab.jpg


I made a gasket from some of the material that was stuck on the inside of my doors..... Remember that stuff?

http://i294.photobucket.com/albums/m...pswfwdupoe.jpg

http://i294.photobucket.com/albums/m...psubokcwfx.jpg


That makes for the end of part one......

Part two, the controls next.

When we stripped the Mazda, we also took the heater controls, which included a multi speed switch, making it work will be another challenge when the wiring gets done.

So this is what I started with after removing the switch and front facia from the total unit.

http://i294.photobucket.com/albums/m...psnuhska0e.jpg

It back to this.

http://i294.photobucket.com/albums/m...pssz5hmgsp.jpg

View from the front, what may be fitted to the dash.

http://i294.photobucket.com/albums/m...pseffyxoym.jpg

Lastly, the view from above.

http://i294.photobucket.com/albums/m...psvf1au8hi.jpg

Of course you can also reduce the size a lot more by cutting away the Aircon and Defrost buttons. Just retaining the 3 speed power switch.

So that concludes this conversion, Martin's worked in his truck before he startsd his restoration, so we know it works.

Now go out and find a Mazda to rob of its fan for your own truck.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Of course with all the horse trading going on, on Sunday, this was another perspective.

Ian and Martin.

http://i294.photobucket.com/albums/m...pswfbnjjtc.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Just a note to add to the post . The MK 1 Mazda heater is the same as the Mk2 and MK2.5 the only difference is the switch on the mk1 is a single unit so easier to hide .i will try and take a picture of the Mk1 switch over the next few days .

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Every now and then I see ideas that just blow my mind, they will not be for everyone, but I like them.

On Sunday, Andy who I bought the Dinitrol cavity wax from came in his International, and one of the things I saw were his wheel nuts.

Now as some of you may recall, I will be fitting some Rallye wheels and white walls later.

However, it would need 24 new chrome wheel nuts, as my wheels have been on and off many times before I bought the truck two years ago, and many since, so the nuts look like this......

http://i294.photobucket.com/albums/m...psjfrrq8kt.jpg

This has to be one of the simplest, cheapest and most genius ways of dealing with old wheel nuts.

Cut down shotgun shells.

My truck will be wearing them, and I do not care if many people copy what I saw on Andy's truck, but I will be doing it too.

I already have an order in for a load from a friend who is a groundsman on a large estate.

http://i294.photobucket.com/albums/m...psnpdnesbb.jpg

Inspiration, sometimes need not come from your own mind.

Thanks Andy.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Like the heat...thanks for the details. The shotgun shells are brilliant!!

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

I too like the shotgun shells...:metal:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Carting off the booty.

http://i294.photobucket.com/albums/m...pshihhlhav.jpg

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Stopped in at the yard on the way home to find some sheet metal to repair the one flank of the rocking horse I found a few weeks ago.

Typically started to chat with the guys, walked a loop through the yard and found this massive vice, dragged it out....... Not fully functional. Then Glens son who works there as well said he had another one stashed if I was interested in it.

http://i294.photobucket.com/albums/m...pspmgpyx2l.jpg

So both came home, one needs some attention, the other is great.

While looking for the steel, I found this little guy as well.

http://i294.photobucket.com/albums/m...psrdycjjlb.jpg

And remember the wheelbarrow tub soapbox cart mock up? May just have.a rear axle and wheels.

http://i294.photobucket.com/albums/m...psfhkjmfee.jpg

Then Glen came along and asked if I was still looking for a retractable pressure hose, as they had got a street sweeper truck in that was headed for Nigeria, and it had a complete unit they could unbolt for me...... At which point his son mentioned that there was a spare in the big shed, so off we went and this beauty came out after some rummaging. I must mention that I was dressed in a white long sleeve shirt and tie with suit trousers, not ideal, but hey-ho, my wife has a washing machine and is forgiving.
But I now have a 10meter or 30" long retractable pressure hose.

http://i294.photobucket.com/albums/m...pscchhj35p.jpg

After dinner it was me, the parts, some Gunk cleaner and a hosepipe with pressure nozzle.

http://i294.photobucket.com/albums/m...psdutwy5lc.jpg


Never got to start metal shaping in the end, but that will happen soon.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Nice score mate, and those treasures cleaned up nicely...:mm:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

agree... nice vises

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Thanks guys.

I am always thankful that I have access to the yard.


Nicola came home today with a parcel from Arizona.........

A few weeks ago I saw some cool Chevy T-Shirts at Kohl's in the USA and mentioned it on various forums so that people who were interested could go out and get them.

Then a week later I get a PM from Chandler, AZ from Richard Grassmick who I had been friends with offline for some time....... What was Nicola's and my T-Shirt sizes, because if he could find them, he wanted to send us each one. Refused me paying for them or the postage so as usual I said Pay it Forward is the answer, to which he agreed.

I obviously tried mine on already.

Thanks Ric, you are a hero.

http://i294.photobucket.com/albums/m...ps588ijd9k.jpg

Tonight on the way home I again stopped in at the yard to drop off some bits for the boys, happened to find mate Martin another retractable hose reel and a small mains driven 250kg winch for another buddy.
Funny how you look for an item for a long time, then two in two days.

http://i294.photobucket.com/albums/m...psaq03r5dg.jpg

Chatted to Ta2Don earlier as well, couple of pics of parts that have to come back in the baggage in October.

Firewall pads?

http://i294.photobucket.com/albums/m...ps72co4blo.jpg

Bigger suitcases??

http://i294.photobucket.com/albums/m...psrlcfigsh.jpg

Yes, it's all our stuff, and there is more coming in the post.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

you both might need to charter your own plan at this rate

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Hi Andy,

I am surprised at how it's taken on a f
Life of its own.

As Ian said on Martin's thread, extra large baggage may be the solution.

That is about right for me, but Martin....??

More than likely a full set plus steamer trunk Ian.

And we are not done yet........

I have parts coming from Missouri as well as the S/S bed strips and fixing kit from Mar-K as well as a full set of side mouldings going to Clem's as well......

I see my life filled with panic in October.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Remember this....??



[URL=http://s294.photobucket.com/user/niknakpix/media/2015%20Continues/image.jpg3_zpsunna3fhw.jpg.html]http://i294.photobucket.com/albums/m...psunna3fhw.jpg

Came home tonight and had 90 minutes.

So grabbed an off cut shelf and dismantled the rocking horse.

Took the one flank off.......

http://i294.photobucket.com/albums/m...psixovvgt6.jpg

Cut the welds along the seam.

http://i294.photobucket.com/albums/m...psilb6vjni.jpg

Copied the rough outline with a Sharpie.

And went to the lawn as I was too lazy to make a propped sandbag to shape the steel on.

http://i294.photobucket.com/albums/m...pscnggpedt.jpg

Kept on bashing.

http://i294.photobucket.com/albums/m...psqxmdvo9a.jpg

Then cut out the bent section with the 1mm cutting disc, shaped it on the grinder, followed by more bending etc to make it fit the other side.

At this point Nicola came home from work and I sit shop as we were meeting up with friends for dinner and I needed a shower etc.

So tomorrow hopefully make the rest fit, then grind and tack weld followed by sand blasting and paint.

http://i294.photobucket.com/albums/m...psbwecum8n.jpg

Got to be an improvement on the rusted away section.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

So I guess your playing with your little pony tomorrow instead of the truck . I suppose it's practice for doing the front fender repairs .

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

that leg you made looks really good considering your tooling of a ball pain hammer and the lawn :metal:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Im amazed at your talents ,looking good.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

It is indeed.

LOL.

The saving grace of the tooling and result is that the horses panels are "textured and not smooth, so I should be able to camouflage it,somewhat.
This is totally crap workmanship, but I was too lazy to make a sandbag, and thought I would try the lawn when the Gunk killed off the lawn two weeks ago :mm:
It may still end up in the bin.


You are way too easily pleased Flashed, but thank you.

As I always say...... Give it a go, if it works, great, if not, try again. Or pay someone.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Mounting three point safety belts.

Jay "Lugnutz" posted up this tutorial, I think it is great and despite not liking safety belts, I will be fitting a set to my truck.

LINK: http://67-72chevytrucks.com/vboard/s...d.php?t=679368

Just need to find the right donor set.

Where's Martin?

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

I looked at that last night as well, very good tutorial . I see a trip to the salvage yard coming soon . The trouble with most late cars Rian is, the belt roll is hidden inside the b pillar, so it doesn't have any form of covering on it . So in other words it unsightly . Now to find a set in the UK that's externally mounted .

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Horse turned out great… I know Nicola is happy!:mm:

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

Thnks Don. You get to see it before everyone else with your previews.

I will be honest, I was going to bin it three hours I today.

The welding was a pain too as the metal was so compromised from rust and old age.

Still, it is done.


Nicola gave me the day off, so I thought I would finish up the lame horse first....... Then Truck Time !!

Bloody thing took all day to do.

Welded and bashed some more......

http://i294.photobucket.com/albums/m...pswsl6nqnt.jpg

Welded into place.

Nothing special, but it's together.

http://i294.photobucket.com/albums/m...psfsnjcpkz.jpg

http://i294.photobucket.com/albums/m...psblarrelg.jpg

Missed out the wire brush and spray painting the frame.

Then started brush painting it.

http://i294.photobucket.com/albums/m...ps5fmgzl18.jpg

Eventually colour mixing, cutting in etc resulted in this......

http://i294.photobucket.com/albums/m...psuus7aibw.jpg

http://i294.photobucket.com/albums/m...pslpk71hz9.jpg

Happy to say I brought the lame horse up to the house and Nicola approved.

He has now been squirrelled away in the spare room where nobody gets to go into.

Bootfair in the morning.

Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
 

That came out great. You are a great craftsman and artist!