![]() |
Re: My 52 GMC Build
Congrats, well deserved...Jim
|
Re: My 52 GMC Build
Congratulations! Nothing sweeter than being printed in a magazine!
|
Re: My 52 GMC Build
Quote:
Quote:
|
Re: My 52 GMC Build
That is super cool! Kind of a rock star first year for your truck. Congrat's!
|
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
Congrats!
|
Re: My 52 GMC Build
That rocks Bob
|
Re: My 52 GMC Build
Quote:
Quote:
Quote:
Quote:
|
Re: My 52 GMC Build
Cool!!
You're a celebrity now ;):metal::metal: Congratz!! Many more to come for your truck! |
Re: My 52 GMC Build
woooooot way to go idaho, nothing better than printed memories
|
Re: My 52 GMC Build
Quote:
Quote:
|
Re: My 52 GMC Build
very cool, congrats. much deserved. funny I know the feeling of that first mag (though not for trucks) My first every skating photo came out in jan 06' two page spread, it was years of hard work paying off. years later and countless major publications, I could prolly say I'd still get excited to have a publication of my new passion (trucks). but man oh man all the media, industry hype etc with the skate industry, has taught me alot. You're are great candidate for the publication, you didn't build this to grace mag pages, you're humble and appreciative and the world needs more builders like you!.
|
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
2 Attachment(s)
Well I finally am getting to build my new welding cart. It will hold my mig and gas also get my tig off the floor and gas for it.
Got the steel cut 1.5" 3/16" angle. Also found a pic from our NC trip at 5820ft. Attachment 1593594 Attachment 1593595 |
Re: My 52 GMC Build
I really enjoy seeing pics of your truck traveling.
|
Re: My 52 GMC Build
Hey 50's--I've been looking for a discussion of the differences in the front sheetmetal on the 1 ton-and-down versus the 1.5 ton-and-up. Have you run across a thread that gets into it?
I know the fenders and hood are different, but in what ways? Other questions I have, if you or anyone else wants to weigh in, are: I know the grille bars are spaced wider up-and-down, but is the grille width the same? It appears the fenders drop lower below the cowl, but is that and the size of the wheel opening the only difference? Are the inner fenders longer? Is the "web" of frame itself taller--from top to bottom of the frame rail? I mean, are normal aftermarket front IFS crossmembers out of the question for 6400 front rails? When you use the big-truck front sheetmetal, and space the rear axle to center the fenders of a 3100 bed (with a back-half, or complete frame swap) does the wheelbase still end up 116-117"? I like what you've done with your truck! I have a decent 2-ton available and am thinking seriously about jumping in. John |
Re: My 52 GMC Build
Quote:
Quote:
Here is what I have found out. When I was at 99's place he brought out a normal chev fender. They where very close to same length, mine was about 2" wider from cab forward. Also my fenders are taller even tho I cut mine down by 3" also the wheel opening is for a 20" truck wheel. As for wheel base mine is 120" with a 80" long box the s-10 rear suspension would have worked. The frame web was about 10" and about 1/4" thick steel. I will start a thread on this I have been wondering this as well. I would build it, if I were you. http://67-72chevytrucks.com/vboard/s...63#post7780963 |
Re: My 52 GMC Build
So it could handle about 4" more track width, I guess? That opens up more frame options.
|
Re: My 52 GMC Build
cool truck subscribed to keep watching!!
|
Re: My 52 GMC Build
Hey Lower, thanks for posting the details of your trip, looks like a good time. As it turns out you where in my neck of the woods, I'm in the NE part of SC. Charlotte: 3 hours, done the tail a few times, all good stuff. What would be cool is if we put together a big AD get together next year at some major park. I hope to have my camper done by April so that would be cool. Congrats on the magazine, that's a big deal!
Rob |
Re: My 52 GMC Build
Quote:
Quote:
Quote:
|
Re: My 52 GMC Build
4 Attachment(s)
Well I got my new welding cart made and my tig welder is finally off the floor after 2 years. The foot print of the new cart is the same as my old one that only held my mig and one tank. I moved the main wheels forward to get better maneuverability in my small shop. The mig is hard wired into the plug that the tig gets plugged into, then I have a 25' cord that I plug in.
Attachment 1597143 Attachment 1597144 Attachment 1597145 Attachment 1597146 |
Re: My 52 GMC Build
Lowered
Great tk, great magazine score! Your welding cart is cool, just one questions do you use the same shielding gas for tig and mig?Two tanks? Keep on keepin on NC |
Re: My 52 GMC Build
looks great, I know that feeling. life and truck keeps you so busy the easiest things get pushed back. I went all these years without a bench grinder. Finally bought 3 of them, hooked one up and still don't have it mounted, so it moves all around!!!!! ahhhh the dumb lazy things I do vs all the hard labor and time crunching things I do. nice ground clamp too!!!
|
Re: My 52 GMC Build
Nice welding cart! Sometimes it takes time to get to all those other projects. I could use some minions around here myself.
|
Re: My 52 GMC Build
Quote:
Quote:
Quote:
|
Re: My 52 GMC Build
5 Attachment(s)
Ok so my plywood bed was always temporary. Now I am trying to figure out what will go with the truck. I crudely used paint and made some options. What do you guys think?
1 would be same aluminum as running boards with black steel strips. I kind of like #5 #1 Attachment 1600096 #2 Attachment 1600097 #3 Attachment 1600098 #4 Attachment 1600099 #5 Attachment 1600100 |
Re: My 52 GMC Build
Hey Bob...
I really like #5..... Something about that wood grain and color that blends well with your truck. |
Re: My 52 GMC Build
I vote number five, yet less shiny...like your truck.
|
Re: My 52 GMC Build
Looking good. #5
|
Re: My 52 GMC Build
if I had to pick it would be #4, it doesnt look like a bowling lane or "newtique" furniture like the others. keep in mind the shinier it is the harder it will be to take care of, even polyurethane has a hard time taking 12 hours of hot sun and weather changes and torrential rain. but dont listen to me, get what you like!
I saw a bed floor made from aluminum bleachers once, THAT would be perfectly in line with your truck, in my dim opinion. http://s18.postimg.org/9pie4xik9/IMG...082243_443.jpg I have made new bed floors for two trucks and stained them pretty, one cedar tint and one redwood tint, and neither of those got the attention and compliments that my reclaimed flatbed weathered cedar on the 49 gets. people love it! the crustiness, the silvering, the rusty strips. Maybe it just fits the look better. |
Re: My 52 GMC Build
To me number 3 compliments the truck the best
|
Re: My 52 GMC Build
I like the knotty #5, but I've seen one (maybe 60-66 forum) that they burned the wood with a torch and then cleared it. It looked sweet. Might be a good rustic look in your truck.
|
Re: My 52 GMC Build
I like #3 with a tad darker tint. I like that bleacher bed idea, I think it would really only work with certain color trucks and def more 60-66 trucks rather than and AD.
|
Re: My 52 GMC Build
I would go with number 5, only a bit more grey-ish so that it looks older.
Suits the truck better when it has an older look to it. I think...... |
Re: My 52 GMC Build
I'm not a diamond plate person. I don't know why but I just don't care for it. I do like #5 and #2. I'd probably go with some painted wood or something. I'm easy to get along with.
|
Re: My 52 GMC Build
1 Attachment(s)
Thanks for all your input guys!!
So #5 ish lol. knotty weathered more gray pine (not quite old barn board) with black strips and stainless bolts. With a flat or satin finish. Something like this? Attachment 1600335 |
Re: My 52 GMC Build
Nice work on the cart! On the bed cover, I kind of like the idea of safety tread plate like fire trucks have. It would go with the theme of your truck seeing how it started life as a fire truck IMO. The top pic in the link. It is pricey though. But you probably would only need 1 sheet. Haha
http://www.bargrating.org/grating/ba...ker-plate.html |
Re: My 52 GMC Build
Quote:
|
Re: My 52 GMC Build
Quote:
|
All times are GMT -4. The time now is 11:09 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com