Re: What did you do to your truck today!
 

x2

Re: What did you do to your truck today!
 

Paid for it and drove it home!!! :metal:

Attachment 1154982

Attachment 1154983

Attachment 1154984

Re: What did you do to your truck today!
 

Tightened the rocker arms, so that it doesn't sound like I'm popping corn under the valve covers. :chevy:

http://i164.photobucket.com/albums/u...ps6325e403.jpg

Re: What did you do to your truck today!
 

Very nice!

It wasn't today, but over the weekend my father in law picked up this grille for our 69 K5 project for $225
http://farm8.staticflickr.com/7438/9...50e41688_z.jpg
Untitled by wrfalcon75, on Flickr

Also got a pair of buckets, a console, and a rear seat for the K5.

Re: What did you do to your truck today!
 

ABSOLUTELY water cooled. :lol:

Re: What did you do to your truck today!
 

Took off the rear diff since the wheels were locked up to find no fluid and a bunch of gear metal pieces... Not Cool

Re: What did you do to your truck today!
 

Attached hoses.... Opened some boxes, discovered the parts were wrong, got pissed off.
Posted via Mobile Device

Re: What did you do to your truck today!
 

I sprayed NAPA Undercoating onto the frame brackets for the bushings, cleaned out the driver's side weatherstrip lip, sprayed NAPA Rust Treatment into there and onto the driver's side floorboard, AND had this installed:

http://i1313.photobucket.com/albums/...ps3275dc66.jpg

The old door was CRAP: 6 single pane windows to the old door, thin as heck wood, and a skeleton key! I'm still surprised why the garage wasn't broken into. It took the company men 8 hours to get this thing in but they did a great job. I can now sleep much more soundly knowing a deadbolt is helping protect my truck.

Re: What did you do to your truck today!
 

Friday I bought these cheapo locking (?) cases from Harbor Freight. We had company over the weekend.

So, today I went to the hardware store and bought some latches. I attached them so I could open 'em up while they
are locked in place (after I unlock the latches), and so they'd be easily removeable.

Just a "need sometimes" deal. And a, "keep honest folks honest" while parked for lunch or something and out of
the line-of-sight from RAT for a little while.

Re: What did you do to your truck today!
 

Kind of cool cases, to small for a tool box but bet they can hold a few things. What is the plan for them Mag, special tools or something. I am always a bit scared so I put big tool boxs in mine but mostly end up being for my friends trucks that break down.:lol:
http://i1199.photobucket.com/albums/...pse8d69a62.jpg
Mudman.

Re: What did you do to your truck today!
 

Mud,

The idea was that I set them up so I can take them in and out. But, I'll probably leave them in 90% of the time. One can easily handle a small ditty bag for bathroom-oriented stuff,
probably including a weekend "emergency kit" of duds and toiletries in case the Boss throws me out, or I find myself invited for a couple of extra days at a bro's place.

The other one will include a set of wrenches and screwdrivers, various 1/2 inch drive stuff to get the wheels off, plug wrench and an extra HDMI module, Windex and a quart of oil and a
couple of rags in a Zip Loc bag...And maybe the add of the universal tool kit; duct tape, vice-grips, and a small can of WD-40. ;)

Also, I have one of those lever/spring dividers that fits nicely to the rear of the bags. It's kind-of a pole with rubber feet that stretch across the bed so that a cooler, chairs, etc. will stay
close to the cab instead of sliding around, while driving and bouncing around on the crappy roads around here.

Re: What did you do to your truck today!
 

So how do they attach to the side of the box, magnets, or did I miss something, which i might have being me. I like that they remove.

Re: What did you do to your truck today!
 

Check out the pic.

The cases were too much $$$ for what they are. But I figure that if something *doesn't* get ripped off, the $62 was a decent $pend. I've got another $25
in the latches and glue, although I bought three sets and only needed two. And I still have glue left over. I found the rubber pads that are affixed to
the bottom of the cases inside the cases. So, I used them to get decent height so that the tops would swing without hitting the floor of the bed.

Also, I put hidden, small chunks of velcro on each of the handles so they wouldn't flop around and sound like a popcorn machine while I was driving.

Where I pierced the cases to push the spring-loaded pins through, I glued appropriate sized washers so the pins would "ride" on metal and not on the
flimsy case material.

Silly personal mod. I've spent eighty bucks on worse things in my life.
But I ain't talkin. That was then. This is now.

Re: What did you do to your truck today!
 

Got A Parts Delivery
https://db.tt/KD2Xwjkk

Re: What did you do to your truck today!
 

Not as much as I wanted to! *And I really wanted to paint some today!!!

I bought some Rustoleum primer and flat black to spray on the driver's side floor boards and I picked up my newly rebuilt carburetor. I also got a lot of advice from the garage owner and it looks like I might be replacing all the hard fuel lines.....

Re: What did you do to your truck today!
 

Mag you put a lot of thought and work into those special cases, I feel tired already. Cool job.

Re: What did you do to your truck today!
 

Loaded Sprout onto a truck to go to its new owner outside of Denver, CO. Well, technically my wife watched the truck driver load it as I had to be out of town this week. The new owner bought it sight unseen, so I hope he's happy with it when it arrives! A little sad (as I always am when something sells), but one step closer to moving to our new home in Kentucky and buying my next project!
Posted via Mobile Device

Re: What did you do to your truck today!
 

Pulled the radiator and dropper it off at culpeppers.

Pulled the heater core, heater box and interior air box. They are both rusted pretty badly. Not sure what I am going to do with them. To bad Gm didnt think to pain the inside of th eboxes so they would not rust from the inside out.

Re: What did you do to your truck today!
 

I sat in my truck, impatiently waiiting for my Tranny Cooler to get here...
Then, I made a plate to cover the giant radio cutout.
Posted via Mobile Device
Posted via Mobile Device

Re: What did you do to your truck today!
 

Check out the link...I had a full day putting the hoist together and cleaning and painting parts for the new to me 6.0 LSx swap!:metal:


http://67-72chevytrucks.com/vboard/s...d.php?t=597993

Re: What did you do to your truck today!
 

Changed out the seat belts, upgraded the driver and passenger belt to a newer Shoulder belt and added a lap belt for the person in the middle.

Re: What did you do to your truck today!
 

very nice set up you have. like the color...

Re: What did you do to your truck today!
 

How do you put the Radiator Hoses back on to the Heater core?

Re: What did you do to your truck today!
 

Got my crotch cooler doors re-installed, and found a line on a working carb, and someone who can rebuild my ailing quadrajet.
Found a solution to my suspension issue, and daydreamed about body work and paint.
Posted via Mobile Device

Re: What did you do to your truck today!
 

Well Ive been after the wife for 2 days to go see her doc about a lower back pain she's been having and she didnt want to go. so I started cleaning on the truck for a little show this weekend and then SHE comes out and hollors let's go.Well had the truck behind everything else, so went to hospital in it.

Well she got rid of one pain but she still has the other.bahahahaha.

had to say that guys.