Re: Daverods project 66
http://cgi.ebay.com/ebaymotors/1965-...Q5fAccessories 6 hours left only $49 now
|
Re: Daverods project 66
http://shop.ebay.com/i.html?_nkw=exh...&_ipg=&_sop=12 I saw a vett one $49 buy it now price.
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
I cracked under the stress 30 sec left bid $610 instead of $61. The bezels sold for $60. Got my heart beating though.:lol::waah:SUCK
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Yeah, but seeing that $610 flash on the screen was probably enough to make him pucker up real good!:haha::haha:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
quote=Strodder;3552022]That doesn't mean you would have paid $610. You would have got it for $61 if you won it in time.[/quote]
Well at first I bid 60.01. I did'nt know you could'nt do cents. That's when panic set in and I bid $610. Then I had to retype in $61 by that time it was over. :lol:Suck:waah::drama::thud:[ |
Re: Daverods project 66
Quote:
You must relax when you are bidding. And NO BEER :tim::barn::alky::haha: |
Re: Daverods project 66
Ya relax. I know, I blew my big chance. I guess the 2 Rockstars I had while I waiting for the last 15 min. to tick by did'nt help. My heart was really going.:lol: I was on the edge. Here I thought I'd be sneaky and bid 60.01. At least now I know they don't take pennies. Then it takes alittle time to confirm your bid. Next time.:lol: 2days 3hrs and 23min. I better start slamming the Rockstars now.:barn::barn::exit::thud:
|
Re: Daverods project 66
3 Attachment(s)
Please tell me it's normal for the driveline/diff to be off to one side. :crazy:
|
Re: Daverods project 66
Hard to tell by the pics, but it looks like the rear diff is shifted to the passenger side
|
Re: Daverods project 66
de diffhousing usually isnt simmetric cause the stuff inside is too the side too
did you measure from the centre of the diff or from the ends of the axle they might've done it to give more room to the driverseat wish isnt as strainge as it sounds |
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
I welded the tabs on by measureing from the diff housing and the flange ends where it hooks to the wheel. It's got to be normal. I hope? I just don't know for sure? It's a 73 rear end. The axle is sitting straight. I measured from holes in the frame and from the stuff I bolted on.
|
Re: Daverods project 66
Most times when you do an engine swap, the engine will be offset to the passenger side by some amount. . . the amount depending on the size of the replacement engine. Most people don't realize that many factory engines are also offset. Another thing people don't realize is that the pinion center line in hardly ever on the center line of the frame. They, also are offset to the passenger side. It doesn't matter that the two U-joints are not on the same centerline from the front of the frame to the back (my engine is set right 2" and the pinion is 1-1/2" right.) It only matters that their individual centerlines are parallel.. Answered my own question I think.:lol: Just freaked me out for a few.
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
and I totally agree with the factory off-set thing, guess I'm not sure what exactly you are asking. the off set would also aid in the u-joints being properly lubricated through-out suspension travel. |
Re: Daverods project 66
|
Re: Daverods project 66
Ok, now I see that you were quoting......geez talk about hard to follow :lol:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
Quote:
|
Re: Daverods project 66
cool, guess i was having a blond moment :lol:
|
Re: Daverods project 66
Quote:
Mac. :lol: |
All times are GMT -4. The time now is 11:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com