![]() |
Re: Dutch '59 Fleetside Longbed
Quote:
One thing I have learned is that your garage / workshop can never be too big. We have a 4 car garage and now it is too small for me. We are now looking at some land so I can have a bigger play space. ;) I like your progress. Keep it up. |
Re: Dutch '59 Fleetside Longbed
Just like this Kees.... form a little box in the center and weld it into place.... cut your receiver hole and put the license plate holder over it.... flips down for the tow hitch!
http://i.ebayimg.com/00/s/OTE0WDEyNT...lTwBRU/$_1.JPG |
Re: Dutch '59 Fleetside Longbed
Quote:
|
Re: Dutch '59 Fleetside Longbed
Today I cut a hole in my freshly build roll pan...
For a reason ofcourse :lol: https://lh3.googleusercontent.com/iS...=w1122-h842-no Made a recessed plate holder and drilled holes for the licenseplate lights https://lh3.googleusercontent.com/hz...=w1122-h842-no https://lh3.googleusercontent.com/6Y...=w1122-h842-no All welded and ground, no filler needed :metal: https://lh3.googleusercontent.com/sa...=w1122-h842-no Now wait for the hinges to come, then cut a new hole for the hitch and make a bracket for the electrical plug. Next thing while waiting is making the coolant pipes and petrol filler door in the bed side. The list is getting shorter :smoke: (by the way, I don't smoke :smoke:;)) |
Re: Dutch '59 Fleetside Longbed
Came out real nice.
Kim |
Re: Dutch '59 Fleetside Longbed
Nice metal work Kees! You are making great progress.
|
Re: Dutch '59 Fleetside Longbed
Yes sir...looking good!!
Mark... |
Re: Dutch '59 Fleetside Longbed
Moving right along...Jim
|
Re: Dutch '59 Fleetside Longbed
Nice job so far.
|
Re: Dutch '59 Fleetside Longbed
Thank you very much, Gentlemen!!
Did a bit of metalwork the last few days. First the coolant pipes, these are the rough ones, its stainless steel: https://lh3.googleusercontent.com/Gq...g=w702-h935-no The filler pipe for petrol, also stainless steel: https://lh3.googleusercontent.com/O9...=w1122-h842-no Next was bedtime ;) The fillerdoor for petrol and propane comes in the rightside of the bed: https://lh3.googleusercontent.com/CM...=w1122-h842-no https://lh3.googleusercontent.com/8S...=w1122-h842-no Well, no way back now :lol::lol: At the scrapyard I had a fillerdoor from a Volkswagen Golf III (Rabbit), but that wasn't going to work. It's too small and too round at the edges. I think I only can use the spring hinge from it. https://lh3.googleusercontent.com/tQ...=w1122-h842-no So, I must make my own steel bucket ;) https://lh3.googleusercontent.com/93...=w1122-h842-no No problem! Then the least fine job, making the holes... https://lh3.googleusercontent.com/_U...=w1122-h842-no Test fitting... https://lh3.googleusercontent.com/ba...=w1122-h842-no Tackweld in and look if it reaches my standards :lol::lol: https://lh3.googleusercontent.com/2O...=w1122-h842-no I think so. On to weld it in... Halfway through.... https://lh3.googleusercontent.com/8J...=w1122-h842-no Fully welded: https://lh3.googleusercontent.com/EE...=w1122-h842-no https://lh3.googleusercontent.com/am...=w1122-h842-no Next time on to the door itself. I'm getting there :metal: |
Re: Dutch '59 Fleetside Longbed
Looking good metal man!!!! ;)
With that huge license plate box you could have fit the gas filler, the propane filler, a hitch assembly and maybe a couple other hidden things behind there!!!! :lol: I forgot how big the european plates were!!! |
Re: Dutch '59 Fleetside Longbed
Yeah, really nice work on the box build and install!
|
Re: Dutch '59 Fleetside Longbed
Thanks PTC!
Yes we have huge license plates :metal: At the inspection I asked for US style plates, they call it 18.2 plates. They wouldn't give it to me because I have already got a tow rate on my papers.....And they don't give it to commercial vehicles :lol::lol: You ought to know how many American "commercial vehicles" have those 18.2 plates...countless... But what the h*ll, I've got my registration, and if you drive 80 mph, you won't see the plates :lol::lol: |
Re: Dutch '59 Fleetside Longbed
Quote:
I'll do my best! |
Re: Dutch '59 Fleetside Longbed
Man, you're really moving along. Love the roll panel. I may have to do something similar. dug
|
Re: Dutch '59 Fleetside Longbed
Coming along real nicely.
Kim |
Re: Dutch '59 Fleetside Longbed
Kim, Dug, Thanks again!!
Managed to get the fillerdoor itself in. It was a bit of a struggle to get it right, because the dimensions of the donorcar are, ofcourse, different as what I use :lol: But it's in, only have to tweak it a little to get it perfect. This is a part of the Volkswagen fillerdoor, only did use the spring loaded hinge: https://lh3.googleusercontent.com/bs...=w1122-h842-no https://lh3.googleusercontent.com/N8...=w1122-h842-no I made the door out of 2 mm (14 gauge) steel, bent it a little to match the side of the bed https://lh3.googleusercontent.com/3g...=w1122-h842-no https://lh3.googleusercontent.com/_H...=w1122-h842-no The door is welded to the hinge, the hinge is bolted to the box. I also welded in an angle iron with a rubber door stop. Looks like a professional build :lol::lol::lol: Next I welded all the holes shut, that the PO had made to screw his tonneau cover on.... It were only 83 holes.... https://lh3.googleusercontent.com/cg...A=w702-h935-no https://lh3.googleusercontent.com/XM...w=w702-h935-no The holes were everywhere:whine: |
Re: Dutch '59 Fleetside Longbed
Came out real nice.
Kim |
Re: Dutch '59 Fleetside Longbed
Wow filler door looks real nice. Factory like.
|
Re: Dutch '59 Fleetside Longbed
Have been busy with paint....
Before: https://lh3.googleusercontent.com/es...=w1247-h935-no https://lh3.googleusercontent.com/XY...=w1247-h935-no After: https://lh3.googleusercontent.com/BJ...=w1247-h935-no https://lh3.googleusercontent.com/rE...w=w702-h935-no Also cleaned the rough waterpipes a bit, painted them black en put them in: https://lh3.googleusercontent.com/47...g=w702-h935-no Tomorrow is sanding bed again, and when time and body allows, paint again ;) |
Re: Dutch '59 Fleetside Longbed
Quote:
btw wy not both coolant hoses in full rubber ? the lower one with a 90 degree piece and the upper with an straight hose with a loose steel spriral so you can bend it without collapsing Sander, |
Re: Dutch '59 Fleetside Longbed
Nice looks upgrade with the paint Kees!
|
Re: Dutch '59 Fleetside Longbed
Water pipes look clean. Nice job. dug
|
Re: Dutch '59 Fleetside Longbed
Quote:
Btw, almost roadworthy.... You know I've got a million things to do.....you know that:lol::lol: |
Re: Dutch '59 Fleetside Longbed
Quote:
I thought the same ;):lol: |
All times are GMT -4. The time now is 01:12 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com