The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   1969 - 1972 Blazers and Jimmys Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=211)
-   -   "Slowly but Surely" Big J's build thread... (https://67-72chevytrucks.com/vboard/showthread.php?t=264226)

Big J 12-22-2009 08:28 AM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by vtblazer (Post 3687473)
There's a rubber diaphram for the washer spray on the wiper motor, once those crack, it won't spray.

Does it sound like it's trying when you push the knob?

I can't hear it doing anything. Is it a real pronounced noise when the knob is pushed?

Big J 12-24-2009 04:05 AM

Re: "Slowly but Surely" Big J's build thread...
 
I got a early Christmas present. I've been needing 2 sets of 6x9s to finish up the stereo in the Blazer. My wife is the greatest, not only did she get me two sets but they are Rockford Fostgate 3 way's!!! Its gonna sound great!:5150:
http://i301.photobucket.com/albums/n...5/P1040827.jpg

Jtrux 12-24-2009 09:46 AM

Re: "Slowly but Surely" Big J's build thread...
 
Lucky guy!

5150 12-25-2009 12:11 AM

Re: "Slowly but Surely" Big J's build thread...
 
It's going to sound nice. There is nothing better then driving my blazer down the road with the radio cranked as high as it will go blessing the people around me with good rock 'n roll :)

vtblazer 12-26-2009 10:01 AM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by Big J (Post 3687521)
I can't hear it doing anything. Is it a real pronounced noise when the knob is pushed?

Yes, typically you can hear it 'pumping'.

Big J 01-12-2010 11:40 PM

Re: "Slowly but Surely" Big J's build thread...
 
Tinkered with the Blazer for a few today. Figured out one of my electrical gremlins. Had both a internally regulated alternator and the factory voltage regulator wired up. Hence dim running lights. Rewired for the internally regulated alternator per writeup in electrical forum under faqs. Problem solved. Nice bright running lights. I still need to add some grounds but thats no biggy. I tried to install the 6x9's in the doors and that was a no go. One hole is all cobbed up and too big, the other is to small. So I'm back to my original plan of making custom door panels and dropping the speakers in those. It'll look better anyways. So if I'm going down that road I may as well do the fiberglass work on the rear panels for the 6x9's and the 12. I was trying to get away from doing those real labor intensive projects, lol. Picked up a neat thing at Smart Shoppers. It relays the remote signal to the head unit if you have the unit hidden like I'm doing behind the glove box door. Pretty simple install too. I was strolling through a local gun store and found a Club in the cheapy bin for 4 bucks, it works too, lol. Heres some pics and I plan on getting back into the groove now that the holidays are good and over, lol.
http://i301.photobucket.com/albums/n...5/P1040884.jpg

http://i301.photobucket.com/albums/n...5/P1040885.jpg

http://i301.photobucket.com/albums/n...5/P1040886.jpg

http://i301.photobucket.com/albums/n...5/P1040887.jpg

http://i301.photobucket.com/albums/n...5/P1040890.jpg

http://i301.photobucket.com/albums/n...5/P1040891.jpg

5150 01-13-2010 10:07 AM

Re: "Slowly but Surely" Big J's build thread...
 
I thought you said $4, looks like you got it for $3. :lol:

Lookin' good, can't wait to see it in July.

vtblazer 01-13-2010 11:38 AM

Re: "Slowly but Surely" Big J's build thread...
 
Hey you need to post here again:
http://67-72chevytrucks.com/vboard/s...d.php?t=109624

Big J 01-13-2010 06:25 PM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by 5150 (Post 3728050)
I thought you said $4, looks like you got it for $3. :lol:

Lookin' good, can't wait to see it in July.

I think that was for vehicle no.3, lol. It was cheap anyways, gotta love cheap. Now watch the key break off in it while its on there or something, lol. I'm going to do my best to be there in July, it'll depend on the job thing. Jamie and I have already talked about caravaning down. I know it'll be done by then, I've given myself no choice, lol. :5150:

Big J 01-13-2010 07:01 PM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by vtblazer (Post 3728173)

Its on there.:metal:

Jtrux 01-14-2010 03:21 PM

Re: "Slowly but Surely" Big J's build thread...
 
Dang it's really coming along nicely, will it be driveable by spring?

Big J 01-14-2010 08:22 PM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by Jtrux (Post 3730750)
Dang it's really coming along nicely, will it be driveable by spring?

I'm tryin', lol. Need to try harder, :lol:

Big J 01-29-2010 11:07 PM

Re: "Slowly but Surely" Big J's build thread...
 
Ok I had a fun day in the palace. Took me 4 hours to clean up and put tools up. Now I know where all my tools are, lol. I was going to use the panels that are sitting in place for templates but they are kinda off, like me, lol. Not too bad but not quite right either :lol:. Got a radio to toss in the dash, got the mount made for the radio in the glove box and mounted up. Found the sun visors I was wanting to use too, just need to clean and paint them. It was a good day.
http://i301.photobucket.com/albums/n...5/P1040901.jpg

http://i301.photobucket.com/albums/n...5/P1040902.jpg

http://i301.photobucket.com/albums/n...5/P1040903.jpg

http://i301.photobucket.com/albums/n...5/P1040904.jpg

http://i301.photobucket.com/albums/n...5/P1040905.jpg

Chevyman63 01-29-2010 11:21 PM

Re: "Slowly but Surely" Big J's build thread...
 
Way to go J!!

jaros44sr 01-30-2010 12:03 AM

Re: "Slowly but Surely" Big J's build thread...
 
Best way I can think of to kill a day!!

Big J 01-30-2010 12:06 AM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by Chevyman63 (Post 3767412)
Way to go J!!

YeeHaw!

Quote:

Originally Posted by jaros44sr (Post 3767503)
Best way I can think of to kill a day!!

I've gotta get in there and have a bunch of days like today. Got a new job and I start Feb. 22nd! Not sure how much Blazer time I'll have after I start.

jaros44sr 01-30-2010 12:15 AM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by Big J (Post 3767513)
YeeHaw!



I've gotta get in there and have a bunch of days like today. Got a new job and I start Feb. 22nd! Not sure how much Blazer time I'll have after I start.

Was it the one you were telling me about?

Big J 01-30-2010 12:28 AM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by jaros44sr (Post 3767531)
Was it the one you were telling me about?

Yep, gonna be a corrections officer. Its a whole new field for me. Hope I like it, lol. Great benefits, retirement, etc. Its a state job so it can't be all bad, lol. They pay for school to so I'll probably go back and get some kind of degree.

jaros44sr 01-30-2010 12:52 AM

Re: "Slowly but Surely" Big J's build thread...
 
COOL, Congrats

Big J 02-03-2010 11:25 PM

Re: "Slowly but Surely" Big J's build thread...
 
Started on the rear panels today. Got them cut out and fitted. Got the sub set up and one 6x9 hole cut. I'm probably going to add some 12 volt outlets and lights too. Its supposed to be nasty out Friday so hopefully I can lock myself in the palace and get some fiberglass work going for the sub. Right now I'm leaning toward covering it all in 4 way stretch vinyl. I think it would come out better then just covering it in the rubber stuff. I've got the trim strips to above the panel too. Got the palace up to a cookin' 80 degrees, had to open the door, lol. The kerosene heater has an old wick so you have to run it wide open so it don't stink, lol. I'll get a wick when this one don't burn anymore:lol:.
http://i301.photobucket.com/albums/n...5/P1040915.jpg

http://i301.photobucket.com/albums/n...5/P1040919.jpg

http://i301.photobucket.com/albums/n...5/P1040921.jpg

http://i301.photobucket.com/albums/n...5/P1040918.jpg

lks dcvn 02-04-2010 09:34 AM

Re: "Slowly but Surely" Big J's build thread...
 
Seems to coming along pretty good now - I have also toyed with the idea of how I wanted to add speakers to my Blazer...looks like a good plan so far.

Yukon Jack 02-04-2010 10:07 AM

Re: "Slowly but Surely" Big J's build thread...
 
Will you be running a single sub? I'll be interested to see this project as it progresses.

Big J 02-05-2010 01:22 AM

Re: "Slowly but Surely" Big J's build thread...
 
Quote:

Originally Posted by Yukon Jack (Post 3779245)
Will you be running a single sub?

Thats the plan. I want one of those wheel well tool boxes for the other side. May make one, might buy one. Somethin' like this.
http://www.jcwhitney.com/jcwhitney/p...41&zmap=444353

vtblazer 02-09-2010 09:05 AM

Re: "Slowly but Surely" Big J's build thread...
 
What kind of exhaust are you running?

Trying to figure out if we'll hear the 'rumble' of the motor or the 'thump' of the bass first...? :hm:


Really great to be watching two blazers come to life!!

Who will be on the road first? Jim or Jason...?

Maybe we should start up a pole? :burnout:

5150 02-09-2010 10:16 AM

Re: "Slowly but Surely" Big J's build thread...
 
If it's like mine, it'll be the music first. I think of it as my duty to inform and educate the young people of today with great music that their generation has apparently dropped the ball on :5150:


All times are GMT -4. The time now is 06:48 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com