![]() |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Thanks to your contribution, I have a happy wife Don :mm: Started my day filled with hope that I would be doing loads of truck stuff today, even did the "Jazz Hands" in my Tuba Trucks T-Shirt, because it was going to be a great day. http://i294.photobucket.com/albums/m...psvku8jfqg.jpg OOOOOPPPPPPSSS......? A friends Jack Russell terrier died last weekend, she was devastated, so Nicola brought a small cross home, and despite us not knowing what religion the dog was, she asked me to make a little stand for the cross, as it may be comforting to her friend. So I thought I would spend an hour or two turning it, as well as an ashtray ordered by Mike Minino in Omaha, Nebraska, then TRUCK TIME !!. Famous last words....... Never cane close to the truck, except to have a lovely long visit from mate Woodsie who brought around some prezzies and a card for Nicola's birthday, managed to show him some of the jobs the truck is awaiting etc. he really gets this whole resto thing. Then back to the woodwork shed. A pile of blanks waiting their turn... http://i294.photobucket.com/albums/m...pscz3bjttk.jpg http://i294.photobucket.com/albums/m...ps1m4bdsse.jpg Half way there... http://i294.photobucket.com/albums/m...psyyorxejz.jpg Suddenly the day was done, and though I had done a lot of non truck stuff, including filling up the various wood and coal stores I had a few bits to show, including some bowls which Nicola promptly claimed. Includes Mikes ashtray, soon off to Nebraska. http://i294.photobucket.com/albums/m...pslsqf0ag4.jpg Now watching Pink Floyd in concert with a little beverage, then bed and hopefully tomorrow some truck time.... Nicola said I could. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Those look very nice , especially the cross.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
You never cease to amaze me Rian.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I am glad the little Cross came out OK. Quote:
I just keep trying stuff. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Cleared and cleaned the garage today, got more wood into my woodpile.
http://i294.photobucket.com/albums/m...pshblbfzgn.jpg While cleaning and clearing the garage, I did discover a set of towbar mounting plates, and they are smaller and fit differently to the ones I had planned to use. http://i294.photobucket.com/albums/m...ps6hnwwwmi.jpg The smaller brackets pull the cross bar upward and can be fitted closer to the bed as well. http://i294.photobucket.com/albums/m...pstxxhuhj2.jpg I started to cut the pieces to prepare them for welding up etc, then realized I really need the new bumper to get it all right. http://i294.photobucket.com/albums/m...psherrioo2.jpg So now I have to wait for my spares I ordered last year to get here by container |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
I am still a little grasshopper compared to most of the guys on here. I just tend to post bits that make me who I am, and because I think most of us are not one dimensional. I wish I had the skills and ability some guys have naturally, for me it's all learned from pics, advice and copying what guys do. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Made up my new heavy duty extension cord from a 110V site cable so that I can get easy current onto the drive when I do heavy duty welding.
This will obviously not be needed for welding plate steel, but I do have a next little side project ready as seen in Kiwi Kev's back yard Hot Rod shop. http://i294.photobucket.com/albums/m...pstefx1wky.jpg With the imminent arrival of my 67-72 rear bumper, and the towbar build going on the back ground, I decided to build my own bumper brackets, rather than spend the $67.00 plus shipping on a set of reproduction irons, even if I wanted them, so yesterday I stopped at a scrap yard on the way home and got these two almost 6 foot lengths of galvanised flat bar, I am sure they will work just fine. http://i294.photobucket.com/albums/m...psgbj8tvaz.jpg This week I also got some very cool plates from "Tiggi" in Iowa, the smaller ones are very cool, they go on stuff that has wheels, but never really make it onto the road. http://i294.photobucket.com/albums/m...ps1mjs9z5s.jpg Lastly, thanks to mate Martin's relentless searching for ways for me to spend money..... I may have found an EBay source for an Auto box steering column to replace the bodged one on my truck. They seller has a few G20 Chevy Day Vans, I have no idea what year model G20 steering columns will fit my 1966 C10, but hope to figure it out soon, as it has to be cheaper at around £200.00 delivered than an Ididit item plus freight from the USA. http://i294.photobucket.com/albums/m...psujs0uiiv.jpg So, if anyone has some knowledge of what to avoid, and what to go for in these steering columns, please let me know. Cheers. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
American video discovered elsewhere, explaining why exactly you need a truck in your life.
http://youtu.be/uP5FSmBl-j8 Made me smile with the simplicity of its message. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
thats a really cool video. love that deluxe truck with all the trim. but the part where the spokesman was talking about what can be delivered to your home and those horrible graphics of the items popped up... now that was bad. makes you appreciate even simple special effects.
thanks for digging that up buddy... |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
Often neat postings fall off the board very quickly. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Nice find Rian cool video
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
MINI ROAD TRIP !!
Well, it was a trip, and it was by road. Got contacted by our import agent this week to say our bits had landed and been unpacked. Duties and shipping to be paid on collection. So Martin and I set off early, also to meet up with Paul Y en-route before collecting our parts from Ron. Perfect weather. http://i294.photobucket.com/albums/m...psaojguwtk.jpg Spent about 90 minutes with Paul talking truck, especially his plans for Woody. http://i294.photobucket.com/albums/m...ps0bvs87ax.jpg As always we spent quite a long time chatting cars, imports and the state of the nation before collecting our bits and setting off. http://i294.photobucket.com/albums/m...psvabv1nna.jpg http://i294.photobucket.com/albums/m...psawofz2dc.jpg Managed to negotiate Ron out of a cool plate for my collection, from his wall. http://i294.photobucket.com/albums/m...psmwjz7ric.jpg On the way back one of the landmarks I always miss out on photographing was this pub. http://i294.photobucket.com/albums/m...psdlruw7vv.jpg One of the items we collected was our 67-72 rear bumpers. NOW QUESTION TIME.... ??? I never realized that there were more holes in them than the two bumper bolt holes. On top of that, I feel a bit pisssed off as there "extra" holes let down the chrome and the show...... It looks like the extra hole was laser cut, and the chrome around this hole is rubbish, or non existent. Any advice on my perception here happily accepted. http://i294.photobucket.com/albums/m...psvps4u2eo.jpg This is the extra hole, and also there are two notches in the bottom edge on each side of the number plate recess. http://i294.photobucket.com/albums/m...psv73uoaox.jpg Up close. http://i294.photobucket.com/albums/m...pstyg7jj5m.jpg My total haul for today, included a load of window rubbers, and a set of door instep stainless strips as well as new door hinge pins. http://i294.photobucket.com/albums/m...psuboxeasw.jpg Tabitha for some reason attached the carpet box with a vengeance. http://i294.photobucket.com/albums/m...psw1csgr1k.jpg http://i294.photobucket.com/albums/m...psmkq9yu0q.jpg After Martin left to go see to the dogs and Amanda, possibly in that order, I went to the garage to carry on figuring out the tow bar. Managed to get to a point where I drilled more holes and cut some metal away. http://i294.photobucket.com/albums/m...psqqmlpnku.jpg Next up welding tomorrow. http://i294.photobucket.com/albums/m...psleig0bdk.jpg |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Unfortunately The Cock inn has been shut for many years... Funny as I nearly bought te house next door many years ago.
Great to see you and Martin today, look forward to catching up again in the near future. P. :D |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
When we got back to Rian's with all the boxes. I found that brothers had marked the boxes for us,so we could tell who's parts were who's See if you can spot it http://i56.photobucket.com/albums/g1...ps62185ab6.jpg Just in case you didn't http://i56.photobucket.com/albums/g1...psef1fa5a9.jpg Just found this funny after I took the picture and thought i would share it do they know something I don't :lol::lol: |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
About your hitch issue, I would assume it wouldn't matter where it sits as you can buy hitches with the correct height that you need to get your trailer to sit level.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
http://i56.photobucket.com/albums/g1...psef1fa5a9.jpg
Just found this funny after I took the picture and thought i would share it do they know something I don't :lol::lol:[/QUOTE] that is funny... so is that your box or Martins? hehe nothing wrong with hanging out with your buds, talking trucks and sipping fresh brew. looks like you had a great day.... |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Awesome road trip...:uhmk:
Thanks for the pub pic, and the pic of the 3 Trucksters...:bann: Hers…Hmmm???:mm: Cheers Mate, happy welding….:chevy: |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Cool stuff
Those "extra" holes may be for positive location of a bumper jack?? And I agree , shoddy work for sure. I would put a bumper bolt in it ,at least it would look a little more "finished" and cover up the crappy workmanship. T |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
^I agree. Ask for a partial refund, explain where you are and why a return/replacement won't work. Then, throw a bumper bolt in there and forget about it.
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Quote:
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Think I turned one of many corners with the truck build today.
Welded the tabs onto the receiver for the removable hitch that I want to bolt to the rear chassis cross bar. I have always wanted the whole rear end to be so I can dismantle it, rather than weld it all up. http://i294.photobucket.com/albums/m...pspudqoeot.jpg Next up I welded the receiver to the cross bar. Quite pleased with the weld, including the upside down rear weld. http://i294.photobucket.com/albums/m...ps3y5vamkr.jpg Working alone means you need to be a bit creative, so I made a wooden carrier for the new bumper, as well as a 1/4 inch spacer I taped onto the rear below the lights. Of course I used some seriously strong tape to tape it to the sides of the truck, rather than have my new bumper end up on the floor. Later when I pulled the tape off, it brought a load of the paint with it........ makes you think. http://i294.photobucket.com/albums/m...psv32kcc1g.jpg Next up was the creation of a pair of bumper brackets out of the steel I bought last week. http://i294.photobucket.com/albums/m...ps8qawku8g.jpg Slotted for adjustment, closer or further from the body, but closest at 1/4 inch. I would rather have it a a bit away than risk the paint eventually. http://i294.photobucket.com/albums/m...pscg2o60wu.jpg Of course welding and galvanizing do not go well together, so I marked the placement of the mounting plates with a cutter disc and ground back the galvanizing. http://i294.photobucket.com/albums/m...psls6rkuvh.jpg http://i294.photobucket.com/albums/m...ps9hgupdpm.jpg Another lesson learned, fortunately before I hit a crisis....... When I removed the mounting bolts of the load bed, I lifted it off randomly a couple of times, so when it came to offering the bumper up to it I realized that things were off, so I refitted the bolts. Bumper fitted. http://i294.photobucket.com/albums/m...psl9h25fih.jpg Removable number plate fitting. http://i294.photobucket.com/albums/m...ps57fxwxhc.jpg So all in a good weekend. |
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
So glad you went with the 67-72 bumper. It's perfect on a Fleetside. Hope I can score a used patina one someday...
|
Re: Grizz's Redneck Express 1966 Chevy Short Fleetside RESTO-GO!
Looks good Rian.
P. :D |
All times are GMT -4. The time now is 01:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com