![]() |
Re: What did you do to your truck today.The 3rd chapter
Got home late after a trip to power plant in east AR so all I did was unbox my new front springs and remove the upper passenger side A arm. Got the cross shaft ends loose on the bottom A arm so I can now take the U bolts off and drop the arm. It was hot, I was tired, and called it a day.
My new cross shafts should be here today. Ordered those and the new springs from RockAuto. New parts on the work bench motivates me. Even though these are weeks, possibly months from installation. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
Mod Thread Dorman 13503 U Bolts |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Welded up the gutter. While I was cutting out the rot I used the borescope to look inside the cowl actually real clean . The prior owner had put screening on the cowl cover so there was nothing in there . But they never cleaned the gutter . Was packed with dirt and pine needles when I got it.
Spent the day cutting fitting and welding couple of spots look bad but they are solid just rusty. A little more grinding and sanding ,a little filler and some seam sealer and I'm calling it done |
Re: What did you do to your truck today.The 3rd chapter
4 Attachment(s)
Long story short I recently removed a ton of paint off the evaporator housing. 20-25 minutes oven cleaner, followed by 5 hours of patience and lacquer thinner. Ecstatic they're in great shape for just polish. I have a general cleaning to do yet, and they'll see a fiberglass polish I hope to see as the ticket.
More than that the painter took my cab, cowl & hood today, and dropped off this bed and tailgate. |
Re: What did you do to your truck today.The 3rd chapter
Cleaned up and ready to cruise to a show about an hour and a half away with 3 or 4 other trucks.. first good trip of 2020 for me
|
Re: What did you do to your truck today.The 3rd chapter
Started to work on removing corrosion and cleaning up the original wheels. In case I actually decide to use them. I finished getting all 5 and the friction rings cleaned up and in primer. Waiting on flaps to arrive from Coker. Then I have to decide if I actually want to use them.
https://photos.imageevent.com/happy_...1676CAF012.JPG |
Re: What did you do to your truck today.The 3rd chapter
2 Attachment(s)
Installed my tires, wheels and caps on the 67 4x4
Thanks Russ |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Going through an engine my son and i pulled last weekend strong runner was rebuilt a year or two before the truck it was in was wrecked got it on a stand cleaning getting it ready for fresh paint and gaskets
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Clean up after the only car show I will attend this year (due to Covid) Took a pic before garaging it again.
|
Re: What did you do to your truck today.The 3rd chapter
Drove the darn thing.
First time in several months!!!! http://67-72chevytrucks.com/vboard/p...ictureid=25942 ...Then I did a big fat burnout in that parking lot right there :burnout: |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Changed the accelerator pump, spring and air horn gasket on the Quadra jet. It eliminated the slight bog in the beginning of the throttle.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I siphoned about 15 gallons of old gas out of my tank. For reasons out of my control the fuel will be 2 years old by the time I get it running again this fall. Pulled the sending unit and it looks like it is fairly new. Also pulled a stick out of the tank....must have been kids.
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Cleaned up and converted the old oil bath air cleaner to paper element.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
A lot of us have.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1. Blasted and painted a set of horns I got from Danny. Installed and annoyed my neighbors with glee.
2. Completed 1st oil and filter change on my GM crate HT383. Surprisingly little iron on the magnetic drain plug. Filled with 30w diesel oil and a wix filter. Used traveller brand from tractor supply. Next oil change will use 5w30 synthetic. |
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
New cab bushings installed. Nothing torqued to spec yet because I have it up on jack stands with the entire front end out. Want to wait until I get it back on the ground to line it all up.
Wire wheeling, blasting, and painting A frames and stuff waiting on my disc brake kit with drop spindles to arrive. |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Actually what i did on my truck...1st time in 15 years
dropped my tank and removed the FP, ordered a new tank and sending unit random rocks and sand in the old tank... might be original stamping says USS with 12 7 66 date |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Working on the wiring. I'm re-routing it so it's out of sight for the most part. That requires lengthening and some new connectors. Since most of my harnesses are in good shape and still pliable I might as well use them instead of buying new harnesses and cutting them up to lengthen. Also installed a relay harness for the headlights.
Tom |
Re: What did you do to your truck today.The 3rd chapter
Started cleaning on a set of GM transport wheels I recently picked up cheap. Decided since 1 was more faded than the others they needed a touch up while I waited on tires to ship. And figured why not change it a little from normal black or white. Painted dodge granite crystal on a gamble and I'm digging the results so far. Think I did fairly well first time trying to clear coat wheels.
https://live.staticflickr.com/65535/...0cbfc5fb_c.jpg20200725_155739 by James Williams, on Flickr https://live.staticflickr.com/65535/...333313c0_c.jpg20200725_155751 by James Williams, on Flickr |
Re: What did you do to your truck today.The 3rd chapter
They look good. I may paint the rally's on my Elkie that color.
|
Re: What did you do to your truck today.The 3rd chapter
Finished going thru the hydraulic system for my 4 wheel drum brakes. Did the rears couple of weeks ago. No issues except a lot of moisture and crud in the wheel cylinders and a worn star wheel on the adjuster. Finally got to the front ones yesterday. No leaking and really in good shape inside, no moisture that I could determine. But what a pain getting the wheel cylinders off. the bolts are almost behind the spindle frame. And looks like the drums are close to end of life. Linings like like new hoses are date coded 12-31-01 and in pretty good shape. Looking into a disc brake upgrade.
|
Re: What did you do to your truck today.The 3rd chapter
3 Attachment(s)
Drove it down the road to pickup some corn for dinner. Corn is sold roadside on the honor system. Sunflowers are starting to bloom.
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
Great color.
Today I started cleaning up the under hood wiring and put a frame to bed ground on that was missing. Then I took each of the little ones out for a ride around town. Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Progress on my 1971 Cheyenne Short bed.
|
Re: What did you do to your truck today.The 3rd chapter
Looks great
|
Re: What did you do to your truck today.The 3rd chapter
Oh yea, that orange looks great!
I finally got my speedometer dialed in after switching to a 700r4. Was way off to begin with, I guess the Astro van donor didn't have a stump puller rear end! Jim |
Re: What did you do to your truck today.The 3rd chapter
Quote:
Quote:
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
Pat |
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
New fuel line ran from gas pump up to carburetor with a in-line filter & the brass one. 66 Chevelle 2 barrel filter for it fit perfect.
Took the old line loose and found this. Gas was clogged up, it shut off and wouldn't stay running. I may need to do a tank cleaning in the near future. Also got the hub caps on the front wheels.:chevy: |
Re: What did you do to your truck today.The 3rd chapter
1 Attachment(s)
I drove it all over the place today
|
Re: What did you do to your truck today.The 3rd chapter
5 Attachment(s)
Bead roller and dimple died some seat side covers and cup holder. Instagram C10ETC
|
All times are GMT -4. The time now is 01:07 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com