Re: intro + 66 black bagged long fleet
 

i know all about that OT!! but the amount of work you do is just straight mind boggling. ever time i look at your thread i feel lazy :waah::waah:
cant wait to see more

And ya thats a good idea on a burnout pic :metal::metal::metal:

thanx guys!!!

Its all good man. ive just been focused on getting the truck running and driving so i havent really been worried about getting them. If you are gonna be around anytime next weekend i will come down and pick them up.. i would like to have the bed floor all done before clems get together :metal::metal:

Re: intro + 66 black bagged long fleet
 

Great work man, the truck looks amazing!

Re: intro + 66 black bagged long fleet
 

i'll be free this next weekend, looks like its going to rain anyways! I can meet you somewhere like Sallisaw or something!! i'll pm you Thursday after work and give you my cell number I might have a three day weekend!!

Re: intro + 66 black bagged long fleet
 

:metal::metal: nailed it man! Well worth the wait, awesome to see my favorite build come to life! Def have the eye for detail...with the photos too! Thanks for the inspiration man!!!
Posted via Mobile Device

Re: intro + 66 black bagged long fleet
 

Hi, Very nice truck.
Especially the weld work on frame! where did you buy the C-notch?
Or did you fabricate it yourself?
/Thomas (Sweden)
Posted via Mobile Device

Re: intro + 66 black bagged long fleet
 

thanx :metal::metal::metal:

ok cool sounds good man!!!

thnax for watching it come to life man!! im ready to see some more updates on your ride :metal::metal:

thanx man!! i fabbed the notches and bag brackets and all that my self

Re: intro + 66 black bagged long fleet
 

got some more done today!! ive been having an oil leak that is getting on my balancer and slinging oil everywhere. i thought it was the oil pan gasket so i swapped it out today.. just in case you guys were wondering if it can be done without pulling the engine, It can be done!! It was a pain but alot easier than pulling everything out. all i had to do was disconnect the exhaust hangers, some wires , motor mounts, and take the dizzy cap loose.. then lift it as high as it would go. the pan barely had room to come out but it worked..

http://farm6.staticflickr.com/5508/9...72f157a8_b.jpg

http://farm8.staticflickr.com/7365/9...cfe445ef_b.jpg

btw the oil pan was not the main leak.. i ended up using a felpro 1 piece oil pan gasket.. i liked it alot better than the 4 piece stock gasket. I guess im gonna do the front main seal and timing cover tomorrow.

i wasnt happy with my cheesy vbelt pulleys and belt so i decided to get something better
http://farm6.staticflickr.com/5341/9...00785024_b.jpg

http://farm4.staticflickr.com/3774/9...4f4d1889_b.jpg

http://farm4.staticflickr.com/3765/9...6f27688f_b.jpg

also got some cool little cree leds to light up my engine bay.
http://farm8.staticflickr.com/7449/9...16b57f6e_b.jpg
this is just 2 lights. im gonna add one more in the hood

http://farm8.staticflickr.com/7383/9...da477958_b.jpg

Re: intro + 66 black bagged long fleet
 

Totally trick engine bay lighting.

Re: intro + 66 black bagged long fleet
 

dude that's bad a$$, you got the gilmer belt drive with the vbelt groove in it! you can run power steering or ac off it too, I got the same one for my sbc! those lights are really cool

Re: intro + 66 black bagged long fleet
 

Top Notch... and the LED lighting is Spot-on
Posted via Mobile Device

Re: intro + 66 black bagged long fleet
 

This build is great. Love the Big block.

Re: intro + 66 black bagged long fleet
 

Awsome....awesome.... Awesome work! Great eye for details and super workmanship throughout! As I'm thinking of a similar suspension configuration (especially having seen your well documented progress)... I'm wondering how the ride is? You didn't go with power steering or Brakes...how do they feel with the bb up front? Dig it!
Posted via Mobile Device

Re: intro + 66 black bagged long fleet
 

thanx guys :metal::metal::metal:

thanx man!! The ride is amazing. it feels like an old Cadillac. I didnt go with power steering or brakes because i wanted the engine bay to have as little as possible in it. The brakes work pretty good. Of course more leg effort than power brakes but not to bad

Btw i changed my front timing cover gasket and front main seal and so far it looks like all my leaks are fixed now. Im going to get up and work on the bed floor some more before i go to work tomorrow.
A big thanx to chad64chevy for hooking me up with a set of rear wheel tubs today so i can finish widening mine :metal::metal::metal::metal:

i only have a few weeks left to get the truck ready for the bbq at clemdaddys house but looks like i will make it no problem.

Re: intro + 66 black bagged long fleet
 

hey coulter no prob. man, was good meeting you! sucks it wanted to start to rain! where did you get the led lights at?

Re: intro + 66 black bagged long fleet
 

ya man it was good to meet you too!! i found the leds on ebay by searching for reverse lights

Re: intro + 66 black bagged long fleet
 

Amazing what some of you come up with, truck is coming out great

Re: intro + 66 black bagged long fleet
 

hey coulter, thanks for letting me piggyback your thread with an invite.
this invite is for any out there, close enough

Re: intro + 66 black bagged long fleet
 

sorry about that. didn't finish the message. breaking in a new computer and hit the wrong button... so any interested in a drive to the ozarks to meet-up with some forum members, come on.

Re: intro + 66 black bagged long fleet
 

no problem man!! im pretty pumped about it.. I am almost ready!!

got the bed floor most of the way done this weekend.. didnt really take any progress pics but you get the idea..

nothing is bolted in place yet.
http://farm3.staticflickr.com/2884/1...c1d9f638_b.jpg

http://farm8.staticflickr.com/7369/1...6f57e5b0_b.jpg

http://farm6.staticflickr.com/5342/1...22d30607_b.jpg

got my wheeltubs widened and fitted pretty good.. still lots of work to do on these!
thanx again chad for hooking me up with another set
http://farm4.staticflickr.com/3783/1...eca0118a_b.jpg

and here is the reason why nothing is bolted down yet.. i spent a long time trying to figure out how i wanted to make some hinges to make the bed floor open up like the hood.. i still gotta make another one
http://farm8.staticflickr.com/7389/1...644217b2_b.jpg

Re: intro + 66 black bagged long fleet
 

Coolest hinge man. Bedwood is looking great. Been watching a patiently and it's all coming together glad to see

Re: intro + 66 black bagged long fleet
 

:metal::metal::metal:

Bedwood and Tubs looking Sweet!!!

Hinges... Over the top!!!:metal::metal::metal:

Looking forward to meeting you and seeing your Awesome truck at Clem's!;)

Re: intro + 66 black bagged long fleet
 

thanx again chad for hooking me up with another set!!

no prob. man, glad you got some use out of them! they came out looking good! LOVE the wood floor, if I would've stayed with a wood floor it would've looked just like that! not to much, just PERFECT!! look forward to seeing the truck in person at clems

Re: intro + 66 black bagged long fleet
 

very cool!! always way cool

Re: intro + 66 black bagged long fleet
 

Dude !!
I want 4 of those hinges!!
Just tell me where to throw my money ..... LOL :metal:

Seriously though, if you made up plans for those, could I get a copy of them?
For the past 18 months I have been struggling with the hinge problem for my bed concept, and the double action never occured to me, I kept fixating on the Porterbuilt style.
Something like this will work 100% better for my intended application.

If not on the plans, dont worry....I already stole the photo :devil:

Re: intro + 66 black bagged long fleet
 

Bed wood looks great! The stain color compliments the truck nicely. Nice job on the hinge too!