![]() |
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
36" divided by 4 equals enuff sticks for 2 battery modules
how do you properly cut threaded stock to keep the nuts going back on them, any tips? |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
so one on top and one on the bottom, upside down, bat style
|
Re: My Dusty 71 GMCe Electruck
3 Attachment(s)
so this is the Oreo Cookie battery tray design, respectfully stolen from Sir Artur Kustusch
Jaguar XJR EV Conversion - Battery Box Build - Part 1 |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
Not necessarily, the one you used is curved, and that affects the aerodynamics of the downward strike....
|
Re: My Dusty 71 GMCe Electruck
I've done the same thing but I also grind a taper on the end of the rod before taking off the nut. It leaves a nice clean cut.
|
Re: My Dusty 71 GMCe Electruck
With all tread, I typically spin a nut on before I cut and then taper the cut on a bench grinder and lastly spin the nut off to clean the threads. Hopefully this makes sense
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
OH, I get it now.
|
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
Quote:
there's also this for only $400 bucks (at $2.50 per pre cut 1 foot rod, we could buy 160 pre cut rods for that price) ha ha |
Re: My Dusty 71 GMCe Electruck
Quote:
This build thread is fascinating. I'm subbed now. |
Re: My Dusty 71 GMCe Electruck
Quote:
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
so here's a peak looksee what we are going for, I don't even know if that Tesla Model 3 battery charger / DC-DC converter combo unit is laying on there right side up or upside down, (you tell me, ha ha)
I am also entertaining shoving it under where the oil pan used to live there may be just enough of a cavity to bolt it up to the battery tray from underneath, for that German like impossible to get to to troubleshoot feel |
Re: My Dusty 71 GMCe Electruck
actual footage of me going to clean the THIRD lower control arm
https://c.tenor.com/E03XoAg_HUwAAAAC/lazy-polarbear.gif |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
The Nigerian ball joint puller !
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and this is all the crud that we manually remove with some hand tools such as the putty knife and metal toothbrushes and some elbow grease before even thinking of spreading the rest across our beautiful lawn with the wire wheel
|
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
and here it is after the first encounter of the four inch kind
|
Re: My Dusty 71 GMCe Electruck
4 Attachment(s)
so I thought maybe all that tar and road grease and grime is good for it maybe that keeps it from rusting? WRONG !
rust is like cancer, it is nasty and dwells under all that grime which only serves to capture and encapsulate moisture |
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
so got a new jug of Concrete and Metal Prep which they renamed, removed the "removes rust" part and there is no mention of Phosphoric acid anywhere on the 90% in Spanish label, also they raised the price, can't wait to see how lame this assumably new formula works
|
Re: My Dusty 71 GMCe Electruck
2 Attachment(s)
No One: How do you know when to stop wire wheelin'?
Me: |
Re: My Dusty 71 GMCe Electruck
1 Attachment(s)
the steerage got some Cool Whip treatment as well
|
Re: My Dusty 71 GMCe Electruck
Quote:
Quote:
There is always that set of jeweler's files that come in handy for unbuggering threads. |
All times are GMT -4. The time now is 05:45 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com