Re: Project: Shiro
 

You're a better man than I for taking it on, I tried and knew quickly I was outmatched. DeWayne is killin' it, I really appreciate his hard work. :metal:

Drivers cab corner installed...
Attachment 1393638

Another view of the driver side cab corner...
Attachment 1393640

Driver door fit...
Attachment 1393641

Frame rails fresh from the powder coater.
Attachment 1393642

Frame loosely bolted together. We'll have to square it up and burn'em down another night, I have to work in the morning and 4am comes early.;)
Attachment 1393644

Re: Project: Shiro
 

Thanks Buck. Excellent work on the frame Buck, it looks awesome. The only reason I like doing my own sheetmetal is that I know that I have only myself to blame for any shortcuts taken. There is no question that your truck is in good hands with Nsane.

Re: Project: Shiro
 

Those guys are really doing some nice work on the rust repair! and fast too. The chassis looks great too. Keep up the good work.

Re: Project: Shiro
 

Wow Ernie. This is really starting to move along quite fast. Everything looks great man!! Gonna be killer when it's done!!
Posted via Mobile Device

Re: Project: Shiro
 

that body work is looking FANTASTIC!!!!

Re: Project: Shiro
 

Looking good!

Re: Project: Shiro
 

Pics from Nsane Hot Rodz...

Attachment 1394000

Attachment 1394001

Attachment 1394002

Attachment 1394003

Attachment 1394004

Re: Project: Shiro
 

... momentum killer, no updates from Nsane Hot Rodz today. :( Luckily we have a chassis in the garage that needs to be built. :metal:

Re: Project: Shiro
 

Cab looks great and is coming along fast! Chassis...drool...I have a thing for nice looking chassis'...love it.

Re: Project: Shiro
 

This thing is going to be insane. You guys are knocking it out

Re: Project: Shiro
 

First update for the day... I think there may be another later. ;)

Fuel filler before...
Attachment 1394544

Fuel filler during... rolled edge removed and prepped for a filler panel.
Attachment 1394545

Those d@mn topper boot snaps have been filled! I think he said 41 or so.
Attachment 1394546

We are replacing the drivers door upon DeWaynes suggestion and due to rust damage to the inner door braces and on the flange. I'm sure we'll see something on this in the next week or so. :metal:

Re: Project: Shiro
 

Lookin' good!

Re: Project: Shiro
 

Good info to know about the fuel filler. Glad you don't have to be reminded of the "old" cab now that the snaps are gone...oh and the rust. Looks great Buck!

Re: Project: Shiro
 

This is like watching a build on fast forward. Cool!

Re: Project: Shiro
 

Second update from Nsane Hot Rodz today...

New driver's door in place...
Attachment 1394795

New Driver's rocker panel in place...
Attachment 1394796

Another view of the new rocker...
Attachment 1394797

And finally the new door, rocker panel, and cab corner interfacing.
Attachment 1394798

Re: Project: Shiro
 

Cool! That is definitely NOT in South Louisiana, because all of that bare metal would be a nice shade of rust by now. :lol:

Re: Project: Shiro
 

Here is a learning opportunity for everyone. Please remember to clean ALL of the powder coat residue out of the threads of your parts and use anti-seize when assembling them.

Trailing arm and heim joint after is seized up on me while trying to install it, this is going to cause some @$$ pain.
Attachment 1394816

Re: Project: Shiro
 

^^^ That SUCKS. Sorry dude.

Re: Project: Shiro
 

I would chase all the threaded components with a tap.
I had a welded nut on a rear bridge do the same thing.
Clean threads and anti-seize, like you said is the answer.

Re: Project: Shiro
 

Yep, it sure does. My own fault.

I assume you are talking about chasing the threads after powder coat and before final assembly. You are correct, I wire brushed them but didn't go deep enough. :banghead: I think I could shorten the heim joint and still use it, but I'm probably going to have to replace the threaded bung on this trailing arm. Going to call the guy at PB Fab and see what we can do.

Re: Project: Shiro
 

Ouch! That looks painful. I bet you can salvage the heim joint for sure but the female threads look toast. Good luck!

Re: Project: Shiro
 

Not really.
It seems sometimes when a nut is welded it distorts the nut.
I had started a bolt and ran it in with an impact during mock up.
It ate the threads when I removed it.
This was the only one.
So I now chase all the theads of any welded nut just to make sure.
(this was the bridge that bolts to the PB step notch).
I also check them after having parts powder coated.

For cleaning threads,... I don't use a normal tap and die set.
I use a set of thread chasers that I got from Sears, years ago.
They're made for cleaning, not cutting.
(I guess they have a shallower cutting edge)
You can chuck them up in a battery drill to make quick work of this job.

Re: Project: Shiro
 

Sucks about the heim joint Ernie but in the grand scheme of things, just a bump in the road compared to the other stuff! ;)

It's really starting to take shape!

Re: Project: Shiro
 

A tap & die for that trailing arm/Heim combo will be pricey. That's not a small hole.

Re: Project: Shiro
 

Maybe, I'll lean on Nate for the answer to that question.

I understand what you are saying and agree 100%, I need to have a set up like that.

Thanks brutha! The cost is starting to weight heavy on my mind and the money wasted by redoing things doesn't help, but I'm going to push through as best I can. :metal: