Re: 48 Burb, bagged, 5.3, 20 year wait
Thank's Doug for the offer on the fender, Dad said he will use the one he picked up.
Sub's looking good. Mark... |
Re: 48 Burb, bagged, 5.3, 20 year wait
Great tip to chase threads after Lizard Skin being sprayed on.
I always do this, after paint and powdercoating. I would like the cap more to the fender also but I'm sure you will get that right ;) Fuelpipe itself looks great!! Not much space I see on those old cars :lol: |
Re: 48 Burb, bagged, 5.3, 20 year wait
nice filler job. again the small details that most people will never notice. but take hours and hours of thinking and building.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Thanks Mark, Kees and 99. I agree Kees and 99, the cap needs to be parallel and closer....and it takes time! Here is where I am heading. Still have to refabricate the fill pipe.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Looks good Doug....I like it, I like it.
Marc |
Re: 48 Burb, bagged, 5.3, 20 year wait
I agree...I like it..looks as if it was made that way.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Very nice Doug...Jim
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Nice touch!! When you get the filler done it will look like the cap is glued to the fender. Ya I forgot to chase some of my holes after lizard skin acts like your cross threading.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
That's the way I like it!
It's all in the small details ;) |
Re: 48 Burb, bagged, 5.3, 20 year wait
Awesome updates Doug, can't tell you how happy I am to see this one under way again. This is one of my favorite threads! As always your attention to detail is awesome, thanks for keeping me motivated.
-Richard |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Marc, Mongo, Jim, Lower, Kees and Richard thank you for your kind words. Really minor progress...though as we all tell each other ... progress is progress.
The fill tube dwcsr fabbed up would have been perfect if I could have placed it farther forward. In execution that idea didn't work and here we are. Now to connect pieces to fab up another fill that works here. Ordered two mandrel bent J pipes so I can whittle away at it. Probably Saturday. Headed to PRI in Indy tomorrow. |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Reconfigured the fill pipe to work with where I needed it to be by cutting apart what I had, then fabricating / cutting pieces to fit. Made it in three pieces and here are the first two going together.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Final piece in place...
|
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Putting a bead on cross fill pipe for better retention and sealing in the connecting hose. Terrible picture, I know, as there is too much stuff in the back ground. Only picture of this I took.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
The bead came out decent.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
And the fill pipe fits ... yay. I think I will fabricate a support mount for this section of pipe. Thinking of something simple like on a 56 Chevy. At my rate of fabrication two days should be sufficient.
|
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
And one last look at cap positioning ... about 1/2" off the fender.
Now to paint the pipes and this portion of the build will be ready for final assembly. |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
When I went to PRI Thursday I stopped by Koul tools. They were really good guys and enjoyable to talk with...plus they had a show special of free shipping.
I couldn't resist and ordered one....way overkill for what I need....and I will be ready for the push lock hose assembly on this Burb. |
Re: 48 Burb, bagged, 5.3, 20 year wait
Quote:
Fill neck looks great, Doug! |
Re: 48 Burb, bagged, 5.3, 20 year wait
Fill tube worked out great..
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Filler fits nice Doug!
Also it sits great in the fender, perfect. And you got a nice welding helmet 👍 |
Re: 48 Burb, bagged, 5.3, 20 year wait
Came out nice Doug.
Mark... |
Re: 48 Burb, bagged, 5.3, 20 year wait
Nice filler. I tell my boys if you work at something long and hard enough you will get it perfect. :metal:
|
Re: 48 Burb, bagged, 5.3, 20 year wait
The filler tube looks perfect Doug. The fun part should be working it through the rubber seal once that is in place. That is a nifty new tool you have there, I must admit, I'm a bit envious. :)
-Richard |
Re: 48 Burb, bagged, 5.3, 20 year wait
The filler tube is a nice touch Doug! Can't wait to see her done makes me want to build mine...
|
Re: 48 Burb, bagged, 5.3, 20 year wait
4 Attachment(s)
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
OK, It was about a year ago I ordered the tank and fill from David at Hollister Road Company. He is really great to work with. Finally it is all together and straps (along with strap rubber) work to hold the tank. I used a mud flap I picked up at Rural King for $8 for the top of tank rubber buffer strips. This mud flap will also be used for body mounts. Way cheaper than from the parts suppliers. The Camaro pan gives really good clearance in here. Artistic low view 3/4 shot....just for personal motivation. OK, not that artistic. Hopefully this will be a cool truck. |
Re: 48 Burb, bagged, 5.3, 20 year wait
3 Attachment(s)
So I went ahead and put the powertrain and steering column back in to figure out steering shaft configuration and brake assembly mounting. Poor project management on my part as I was here earlier this year too. Got tight on time with the schedule at the metal shop.
I "might" be able to use two joints and one shaft since I moved the steering a bit to the left. It will likely be three joints with a support bearing and I will be getting those components ordered soon. By using a dowel rod and duct tape, I roughed out the shaft needed. The bottom connection at the rack might be tight. Tried a different style drop here as I didn't like how the one I used previously was fitting. Didn't like the look either. This drop was laying on the shelf from a previous build and it has some age as it was labeled Mullens Steering. Mullens sold out to Borgeson some time ago. And I am not wild about the look of this drop either. Too "billet" for the build theme. Maybe more fab? Next week end is Christmas and I plan to get in some good shop time the week after. |
Re: 48 Burb, bagged, 5.3, 20 year wait
Moving along nicely there Doug..the way your going on this its almost like your in a contest or something.....haha
|
Re: 48 Burb, bagged, 5.3, 20 year wait
What is the tank out of?
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Looks good Doug...I used 3 joints but I need to confirm header clearance once I get the mock up LS block back. I hear ya on the billet drop. My thoughts exactly with the billet drop I used. The price was right so I decided it would be easier than fabricating my own. I plan to paint mine the same color as the steering column and dash..what ever color that will be.
Marc |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Quote:
Quote:
Quote:
Here is the push lock hose press a friend created that I mentioned earlier. It worked fine. |
Re: 48 Burb, bagged, 5.3, 20 year wait
All looks good Doug.
WhatMarc said, painting the column drop is maybe the best option, besides making your own. I think, only if you go for a high end billet vehicle those drops would work ;) It's just not old enough. So, now you know how I think about billet stuff, not my cup of tea :lol: Linking your steering can be a problem, I know, I'm still not happy with mine, although it works. I'm sure you will work it out :metal: |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Looking good Doug...Here is a shot of the steering I set up on that Chevy coupe I'm working on the angle looks very close to what your working with (same manifolds also)
Sand blast the column drop and paint it! Mark... |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
Quote:
Quote:
Sunday evening I ordered the needed parts sitting on the couch using the IPad....and it still amazes me when they show up a couple days later because I live in the sticks. One part showed up Tuesday and it wasn't expedited shipping. The rest showed up today. I really like the looks of these stainless steel pieces from Borgeson. The dowel rod will be used to mock up dd shaft lengths between u joints before cutting the stainless steel shaft. That should help me get the lengths correct. |
Re: 48 Burb, bagged, 5.3, 20 year wait
1 Attachment(s)
The pinion steering shaft has the triangular shape and is pictured above. I wanted to check the fit of the u joint there as the fit looks pretty tight.
Yep, it's pretty tight...:) Hopefully adjusting the rack up and over will provide needed clearance. What would it be like to bolt stuff together and it just fits? Nah, that wouldn't be fun...would it? Anyone go over to LS1Tech and watch a Kwhizz build? He takes really nice mid to late 60's B body Chevys and does a LS Connect and cruise swap, VA and DD gauges. Done in two weeks. I think I want to try that.... |
Re: 48 Burb, bagged, 5.3, 20 year wait
Hey Doug, enjoyed the talk yesterday. Yes we got the air compressor running, had to install a new 5 hp motor (not cheap), but can't be without it. Again Merry Chirstmas to your entire family...Jim
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Nice steering parts Doug!
|
Re: 48 Burb, bagged, 5.3, 20 year wait
Look's good Doug, Would love to have you and the wife come visit anytime!
Hope you have a great Xmas.. Mark.. |
Re: 48 Burb, bagged, 5.3, 20 year wait
Quote:
I think if we just built the same thing over and over we could probably do them in two years 😜 The work you are doing on the steering looks great (as always). Merry Christmas to you and yours Doug. -Richard |
Re: 48 Burb, bagged, 5.3, 20 year wait
5 Attachment(s)
Hey Jim, Lower, Mark and Richard always appreciate the encouraging words!
After installing the seat to evaluate the drop, I decided the last one I tried was too low. After a couple hours of evaluating various options, I went back with this one, Painted black it will look OK. Steering is pieced together with the help of 3/4" wooden dowels to get the shaft lengths correct between u-joints. Then I made the support for the shaft from some angle iron in the scrap pile. |
All times are GMT -4. The time now is 07:05 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com