Re: What did you do to your truck today?
 

Drove it to work and toasted the power steering pulley.

- Brian

Re: What did you do to your truck today?
 

I was out in the garage tonight tying up some loose ends on the new wire harness when my wife decided to “help” me.........

Re: What did you do to your truck today?
 

Good looking woman you got there Willyp.:smoke:

Re: What did you do to your truck today?
 

And how did the install on the new wiring harness go???

Re: What did you do to your truck today?
 

I'm guessing he got sidetracked, that motorboatin SOB.

Re: What did you do to your truck today?
 

ok so i painted my bumper and grill!
this is my first time paint and im happy with how it came out!!
Attachment 594353
Attachment 594354

Re: What did you do to your truck today?
 

she finally got lowered today
http://c2.ac-images.myspacecdn.com/i...e6ed972835.jpg

Re: What did you do to your truck today?
 

With her help you will never get anything done :lol:

Re: What did you do to your truck today?
 

I shortened my exhaust, fixed a brake line (again) and contemplated notching my frame; how to, what type (C-notch, step notch) or Z-the frame. So many choices. I will post pics of the back of the truck soon- I cleaned the frame and it is BEAUTIFUL!

Re: What did you do to your truck today?
 

Made several attempts to fix a power steering leak near the pump. Everything is less than a year old, with no apparent source for the leak other than both hoses are wet. Attempted to tighten everything up, but there were no loose connections. Looks like the next step is to pull the pump and both hoses for closer analysis, which I was hoping to avoid.

Re: What did you do to your truck today?
 

ordered a 3 speed floor shifter, and pulled the drive shaft for new u joints.

Re: What did you do to your truck today?
 

willyp- Have you finished that wiring project yet???:smoke:

Re: What did you do to your truck today?
 

Finished a few things over the last week or so (what can I say I work slow). Basically changed intake, distributor and cleaned up some of the wiring under the hood. Here's a before and after shot.

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

Overall the harness is done, still tying up a couple loose ends and installing the braid kit I got from painless to clean everything up. I thought the kit would have come complete but I had to purchase a couple things. Ground straps, front park lamp connectors, rear tail light connectors, battery cables. I had to reuse the original steering column connector but the kit does come with 2 late model steering wheel connectors if you have a late model column………..that’s a good thing cause I plan on changing mine later. There are no wires for the reverse lamps but there are wires on the harness for electric fan relay, engine temp, oil pressure, electric choke and under bed mounted gas tank. Everything fit perfect except the heater wire was about 6 inches short and one of the dash lights had a faulty crimp that I quickly fixed using my old harness. I had to replace the dome lamp, it was totally melted and the lens was stained with smoke, also the horn and I added a $6 light plate light for late model chevy trucks. While I was at it I added a coolant over flow tank. Overall I am happy with the job, it took a little longer than I thought but I had to order a couple things and instead of using the crimp type connectors painless provided I soldered and heat shrunk every spice.

Re: What did you do to your truck today?
 

more....

Re: What did you do to your truck today?
 

forgot one.....

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

Why do men love boobs?...You can't motorboat personality!

Re: What did you do to your truck today?
 

Re: What did you do to your truck today?
 

Got a price for new windshield installed with new rubber- $225.00.

Re: What did you do to your truck today?
 

seems like a good price. i just had the front windshield and rubber replaced and the rear window rubber replaced for $316 from safelite. they did it in my garage.

Re: What did you do to your truck today?
 

I thought it is reasonable. The glass would cost me $128 plus the rubber has to be $40-50. It has the chrome trim and he is coming to the truck.

Re: What did you do to your truck today?
 

Went out to the local junk yard today and scored big time………battled some bees and snakes but I won! A pair of sweet unblemished cab sails, a headlight retainer ring, a small piece of trim I was missing for the windshield and an original radio.

Re: What did you do to your truck today?
 

After 5 years of sitting at my Sister-In-Laws house I finally towed it home!

Time for the fun to start!
Attachment 594684

Re: What did you do to your truck today?
 

Finding good stuff at a junk yard or swap meet always makes for a good day, especially if it's something you were after!

Re: What did you do to your truck today?
 

I traded four 15x8 6 lug rallys with 62Bowtie for some 5 inch drop springs for the rear I have to install this weekend, would have done it last weekend except the bolts were saying no, been soaking them done every night with PB blaster.

Re: What did you do to your truck today?
 

that looks like a really clean install. I did the same harness with wire loom, but need to clean it up how I ran mine.

Re: What did you do to your truck today?
 

After a lengthy production delay, UPS showed up today with my passenger side spotlight bracket. Having everything ready, it was installed immediately:

http://img815.imageshack.us/img815/8082/rh01.jpg

Re: What did you do to your truck today?
 

markebo1 I just saw the same light on CL for $100, they are illegal in Calif, but you can have diummies.

Re: What did you do to your truck today?
 

thats just plain cool

Re: What did you do to your truck today?
 

It appears functioning spotlights remain legal in California. Here's the applicable Vehicle Code:

http://www.dmv.ca.gov/pubs/vctop/d12/vc24404.htm

I was a native of California until 20 years ago, and I've had spotlights on my cars almost my entire life, as did my parents before that. The law has a few more specifics now, but the main issue has always been you cannot direct an illuminated spotlight beam on any moving vehicle.

It's probably mainly a safety issue so as not to blind other drivers, but the code may have been introduced in the 1940's in response to the Caryl Chessman "Red Light Bandit" death row case, where he would cover the light with red cellophane and pull people over for criminal pursuits.

Re: What did you do to your truck today?
 

That's pure class markeb01, are the lights nos or stock and did you have a template to know where to drill the holes? Anyway that's about as cool as it gets, "I like"...Vernski:metal:

Re: What did you do to your truck today?
 

primerd the hood
see what it would looked like
ill get some more day time shoots later

Re: What did you do to your truck today?
 

where do you find a windshield for that cheap
ive been looking everywhere and all i can find is over 200 bucks

Re: What did you do to your truck today?
 

Hi Vernski, thanks! Both lamps are used originals off eBay. The driver side lamp is near mint only showing very minor shelf wear. I mean it's cherry and the bracket is in perfect condition. The passenger side lamp was described as mint, cost twice as much and looks good only in photographs. I'll be replacing most of it as parts become available. The lamp shell has minor dings and bubbles under the chrome, and worn internal parts. If it had been described more accurately I would have spent the extra money and bought a new one instead.

I used the template that's in circulation on the forum, but it placed the bracket about 1/2" too far forward. I documented the install here:

http://67-72chevytrucks.com/vboard/s...d.php?t=401449

I was really lucky to obtain the passenger side bracket at all. I called Unity and they recently discovered they had 7 raw castings left over from decades ago and allowed me to order one. Once completed Quality was very unhappy the casting ever made it into production with 50 years of shelf wear on it. The bracket was completed with some blemishes, and I was allowed to buy it as-is with the warning "if you want one take this one, because Unity will never be producing any more" (I think somebody may have gotten in trouble for selling it in the first place). If it needed to be show quality any good chrome guy could make it look perfect, all it needs is a bit more copper and some delicate polishing, but I'm happy with it as it looks since it matches most of the rest of my truck.

Re: What did you do to your truck today?
 

Epoxy primed my grill filler panel after stripping all the laquer primer off it.