Re: 1968
 

Black is a good color. I thought about it, laugh about it and forgot about it.

Re: 1968
 

Today i installed the trailoring arms and the tracking arm. Now I am waiting again for parts. Soon I hope.

Re: 1968
 

Hey, there here is a set of vent windows that I picked up on the parts board.
They are really nice. The picture does not do them justice Just have to change the rubber seal aounnd the glass. I need to get a pair of 67/68 window locks knobs kits they are really loose.

I picked these up for 100.00 ship

Re: 1968
 

I also picked up the grill for a 67/68 this week.85.00 ship
A set of headers that fit the 350 60.00 ship
A short nose water pump pulley 22.00 ship
A cigeratte lighter 10.00 ship
A emblems for the finder 10.00 ship
A set of back up lights 10.00 ship
A set of brackets for a 67/68 tail light 10.00 ship
A set of tail lights for a 67/68 step side bed 19.00 ship


most of these parts I want need for a while but, the price was right.
I am knocking my list down a bit this month. I am about to run out of money. But,I keep seeing the deal on the parts board.

Re: 1968
 

Those are some nice looking vent windows.

Re: 1968
 

It looks like you got some good deals on parts, and you will need those parts sooner than you think considering you are close to finishing the build.

Re: 1968
 

Movin' right along.

Your going to have ruts in the road from the delivery guy delivering all those parts.:haha:

Soon,,,,,,,driving very soon.

Re: 1968
 

Thanks guys I am doing my best trying to keep up with you guys. if building this truck is a 100 mile race I figured I have ran 40 miles. A long way to go.
Now is the hard part getting those parts to my door.

Re: 1968
 

Today I was trying to install my head light buckets. I misplaced the adjusting screws somewhere. I looked high and low for them. I tried to save all the special bolts and screws. But only found one and the platic nut was broken. So I came to a conclusion that I must have put them in file 13. So I guess I will have to order some. Does anyone have a 4 screws and nuts out there. Thought I would asked.

Re: 1968
 

Sorry, George. Nothing here. I'll probably run into the same thing as you by the time I get around to putting the headlights in.:lol:

Re: 1968
 

I was looking just for the glass frame and I was going to rebuild mine. But now all I have to do is replace the rubbers and :bann: done. Sometimes it pays to check to parts board

Re: 1968
 

Nothing here to post. I am working at a friends house painting their master bathroom. They are well in their years and can't do it themselves. I thought I would re-attach the transmission lines to the radiator, but went outside and it was at least 90 under the canophy. So I went back inside and did nothing. What a day.
Tomorrow morning I am going to sand blast the rear brake light houseings that I purchased the other day. Already done the brackets.

Re: 1968
 

:hi2:
I wish that was so. About me driving soon. But I will be working on the old girl for the rest of this year.:waah: It is just too hot under the canophy to do anything right now.

Re: 1968
 

I just thought I would ask to see if anyone had some of these screws laying around. But it looks like I will have to order them. I can find the screws but the platic nuts are the problem. Most of them are dry and brittle.:bowtie:

Re: 1968
 

Today I had to cut the weed in my yard. Don't have a lawn just weeds. Sat. is my adophed sons birthday so we are having a small get together for the boys. So Had to clean up the place. Don't want anyone to get hurt on my stuff. I think it is ,but the little woman was concerned. Too many things that I had to move and put away.

But I did paint the under side of the truck. I needed to paint the bolts and nuts when I re-installed the trailoring arms and tracking arm. Now they are clean And painted.

Re: 1968
 

Picked up a set of transmission linkage for my th350. Painted them up and now waiting to buy a colum to put them on. Got my new cigerette lighter for the truck and some emblems. and a set of back up ligts. Don't know If I will use them or buy a new set. I will have to wait and see if they clean up.

Re: 1968
 

The back up lights cleaned up super nice. No rust or pits or anything. Not bad for 10.00. I installed the transmission cooling lines today also. The water pump pulley came in and painted it black and installed it on the motor. Along with the shroud and the 6 blade fan. Everything is looking great as far as the shroud and pulley goes. Now I need to find a adjusted for the alt. The power steering pump will be next on my list.

I sand blasted the back up lights and the rear turn signals and some vent window parts. Painted them gloss black. The rear turn signals came out real clean. I an going to use a set of back up lights from a fleet side truck. I like the way they can fit flat against the side of the bed with a flat bracket. After I install them, I will see if I keep them. I ordered them from the parts board the other day.

Re: 1968
 

pictures of the back up lights I am planning on using. and the rear turn signals also.

Re: 1968
 

Here is my 35.00 orginal equipment wind shield motor that I had rebuilt.

Re: 1968
 

truck is coming along nice! Lots of progress since I saw it. Gotta love deals on the parts board!

Re: 1968
 

yea I have scored a good amount of parts from there.

Re: 1968
 

Didn't do anything on the old patches today. Had to work somewhere else (painting) Maybe tomorrow when I return from the Post Office shipping some parts to WI. Rick's sill and other parts.

Re: 1968
 

How did that tail gate work for ya.

Re: 1968
 

She is really starting to come together George! Looking good!

Re: 1968
 

Another day and did nothing. But my headers came in today. I willpost pictures of them on the truck I hope tomorrow.