Re: ''Project '64 SYT Super Yenko Truck"
haha its alright man
so what are you doing up at 1:30 in the morning dont you have to work or something |
Re: ''Project '64 SYT Super Yenko Truck"
both of yall need to get off the net. I had my stock heads drilled to 2.02/1.60
|
Re: ''Project '64 SYT Super Yenko Truck"
Damn you people stay up late. I'm in bed by 10:ito:But up at 6:uhmk:
|
Re: ''Project '64 SYT Super Yenko Truck"
I've got a set of hawged 283 heads they worked good on the 283 they were on pulled from 4000 till the distributor couldn't keep up
5.7 vortecs are suposed to flow almost as much as 327 camel backs We run camel backs on 65gmc930 's 355 in his race truck, he's another gearhead who's not old enough to drive by himself on the road and nobody is crazy enough to ride with him on the track. |
Re: ''Project '64 SYT Super Yenko Truck"
The vortec heads out flow and produce more than the camel back i have done this test on dyno and bench
|
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
:lol:This thread has been hijacked:lol: |
Re: ''Project '64 SYT Super Yenko Truck"
ILL SEE IF i STILL HAVE THE SHEETS i WENT TO UTI ABOUT 10 YEARS AGO AND IT WAS ONE OF MY LABS. I BUILT A SMALL BLOCK AND COMPARED INTAKE / HEADER COMBOS ALONG WITH HEAD COMBOS. ILL LOOK FOR THE LAB SHEETS FOR YA. BUT I WILL SAY WITH A LITTLE SPRAY THEY WERE AMAZING. 10:1 LONG TUBE WITH VORTEC HEADS AND EDELBROCK VICTOR BROKE 500 HP AT THE WHEELS WITH A TURBO 350. NO CORRECTION'S.
THATS WHEN I BECAME A BOTTLE BABY. |
Re: ''Project '64 SYT Super Yenko Truck"
Don't spend a buch of time on it just curious we need to build an engine for the race truck and have a vortec handy (thinking):devil:
|
Re: ''Project '64 SYT Super Yenko Truck"
Yeah I like them the canted valves are nice. if your going to spend the money on head work I would do so on the vortec heads. but make sure you take them to a shop that knows vortec. you can over port them and ruin the heads flow characteristics
|
Re: ''Project '64 SYT Super Yenko Truck"
we have to leave them stock or we get bumped to open class and those guy spend a fortune on their engines
|
Re: ''Project '64 SYT Super Yenko Truck"
they work fine stock. Like I was saying we did 500hp (on spray)stock heads
|
Re: ''Project '64 SYT Super Yenko Truck"
wow i need some vortec heads an intake some offset rockers a valve spring seat cutter and some bigger springs and ill be set
i had a chance to buy a set of vortecs with circle track springs (good to .650) with scorpion roller rockers and a performer rpm air gap intake for 600 bucks should have bought it |
Re: ''Project '64 SYT Super Yenko Truck"
Merry christmas!!!
|
Re: ''Project '64 SYT Super Yenko Truck"
merry christmas kiddo
|
Re: ''Project '64 SYT Super Yenko Truck"
didnt you just love the snow :metal:
|
Re: ''Project '64 SYT Super Yenko Truck"
Quote:
|
Re: ''Project '64 SYT Super Yenko Truck"
we got 6-8 inches thursday
|
Re: ''Project '64 SYT Super Yenko Truck"
Send some snow over to Ga.........Anything but all this rain we been getting.
|
Re: ''Project '64 SYT Super Yenko Truck"
|
Re: ''Project '64 SYT Super Yenko Truck"
well yall warned me
the ford got 10 miles from the house and it blew the upper radiator hose off put it back on and filled it up at the car wash then went to the parts store and picked up another one 25 bucks there i got home and found out the radiator is leaking so i have to pull it out and take it to the shop so what a great day huh :( |
Re: ''Project '64 SYT Super Yenko Truck"
hey i want yalls opinion
im thinking about putting a single muffler on my truck 3 inch yed into a 3 in with one of these mufflers oh i have a radiator for the ferd on the way it will be here saturday :metal: |
Re: ''Project '64 SYT Super Yenko Truck"
well i got my radiator
its a single core i cant believe they use a single core on a 5000 lb truck |
Re: ''Project '64 SYT Super Yenko Truck"
Ok so what ever happened 2 this truck build ? I liked the direction it was headed and thought your progress was on track ! the mustang side lined you
|
Re: ''Project '64 SYT Super Yenko Truck"
no the not having any money or job side lined me
so once i turn 16 ill get a job and start back on this ill do a little here and there |
Re: ''Project '64 SYT Super Yenko Truck"
Sounds to me like you've been spending money on that ferd................
|
All times are GMT -4. The time now is 05:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com