The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Shawno72's long overdue 68 daily driver build thread (https://67-72chevytrucks.com/vboard/showthread.php?t=559520)

Rusbuilt 04-06-2013 06:39 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Everything is looking good Shawn!

shawno72 04-06-2013 06:47 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by Rusbuilt (Post 5994983)
Everything is looking good Shawn!

Thanks Rus!

shawno72 04-08-2013 11:15 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Ok guys, I took the truck for a longer drive at highway speeds and all I have to say is the ride SUCKS!! Is this common with air bags or is more like my air pressure in the rear bags is to low (25psi)? With the coil springs this rode like a dream. I may have to lose the bag hats and mount directly to the frame?

Rusbuilt 04-08-2013 11:30 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
I would remove the hats and mount it to the frame so you could increase the amount of air in the bag. Thats gonna help your ride quality!

shawno72 04-08-2013 11:34 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by Rusbuilt (Post 5998290)
I would remove the hats and mount it to the frame so you could increase the amount of air in the bag. Thats gonna help your ride quality!

That's what I figured, I just didn't want to :waah: :lol:

Rusbuilt 04-08-2013 11:40 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Look at the up side (really down), you can go lower without the hats!! Well if you cut a hole for your rear end anyway!

Ol Blue K20 04-08-2013 11:41 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by shawno72 (Post 5998302)
That's what I figured, I just didn't want to :waah: :lol:

Well this just sucks, hope you get it figured out before Sunday

lolife99 04-08-2013 11:45 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Try 40psi to 50 psi right now,... to check the ride.
Get that dialed in while checking the ride height.
That will tell you if removing the hats, will make them work for you.
(how tall are the hats?)

shawno72 04-08-2013 11:50 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by Rusbuilt (Post 5998311)
Look at the up side (really down), you can go lower without the hats!! Well if you cut a hole for your rear end anyway!

Why stop there? May as well raise the whole bed floor for the inevitable ;)

Quote:

Originally Posted by Ol Blue K20 (Post 5998317)
Well this just sucks, hope you get it figured out before Sunday

She is still driveable just bouncy, hey I may as well just air it out more for a really low ride height :smoke:

Quote:

Originally Posted by lolife99 (Post 5998325)
Try 40psi to 50 psi right now,... to check the ride.
Get that dialed in while checking the ride height.
That will tell you if removing the hats, will make them work for you.
(how tall are the hats?)

I thought of that too. It'll just look like I'm stuck in the 70s with my rear way up in the air :5150:

Ol Blue K20 04-08-2013 11:53 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by shawno72 (Post 5998335)
Why stop there? May as well raise the whole bed floor for the inevitable ;)



She is still driveable just bouncy, hey I may as well just air it out more for a really low ride height :smoke:



I thought of that too. It'll just look like I'm stuck in the 70s with my rear way up in the air :5150:

What's wrong with the 70's from what I can recall... I had a blast!! I think...:lol::lol::lol:

RRC 04-08-2013 11:58 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
[QUOTE=shawno72;5994128]Well guys I took it for a good little drive over rail road tracks and lots of bumps. She rides very well and never once bottomed out. I am quite happy with the bags :)[/Q Remember this...... Loose the hats and mount the bags to the frame and adjust the air psi. too fine tune the ride:metal:

shawno72 04-08-2013 12:08 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Will a holesaw do the job cutting a hole into the frame for the air fitting?

lolife99 04-08-2013 12:15 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by shawno72 (Post 5998379)
Will a holesaw do the job cutting a hole into the frame for the air fitting?

It should.
Make a good template of the top of the bag.
I put the two bag mount holes in line (parallel) with the frame.
That gives you the option to put the air fitting towards the inside of the frame or the outside.
It's a tight fit getting your hand up in there.
I also used studs in the upper air bag bolt holes.
Since you are working by "feel",... then all you have to do is install a couple washers and nuts.

shawno72 04-08-2013 12:21 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by lolife99 (Post 5998393)
It should.
Make a good template of the top of the bag.
I put the two bag mount holes in line (parallel) with the frame.
That gives you the option to put the air fitting towards the inside of the frame or the outside.
It's a tight fit getting your hand up in there.
I also used studs in the upper air bag bolt holes.
Since you are working by "feel",... then all you have to do is install a couple washers and nuts.

Great tip, thanks I'll def use the studs idea. I see a lot of guys put the fitting hole to the inside of the frame so I guess I'll follow suit.

fastcam1 04-12-2013 04:19 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Any luck with more psi?
Posted via Mobile Device

shawno72 04-12-2013 04:27 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Quote:

Originally Posted by fastcam1 (Post 6007426)
Any luck with more psi?
Posted via Mobile Device

Haven't tried it yet. Don't want to run around like a stink bug :lol: In town its fine but when I get to highway speeds and the road is rough then it gets bouncy. I am gonna plan on removing the hats but for now I just want to drive it for a bit.

shawno72 04-14-2013 07:55 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
5 Attachment(s)
Well guys I just got home from the C/10 Club BBQ and let me tell I had a blast!!! I am sunburnt but the company was outstanding!! In attedance were many of the C/10 Club and forum members you already know including

Shawno72 - Me
C/10 King - Rene
KevsClassics - Kevin
OldblueK20 - Dale
Hardesty454 - Rob
SACRAMENTO 71 - Nick
Sick5 - Gilbert
LongNLowGMC - Vince
Elnutty
Daaaanz67 - Dan
Mr Clean C-10 - David
Barcobear - Mark
Scavenger - Mitch
hp1957 - Harvey and Bro
Surfer dude Bob
Mark G.
Steve

Attachment 1092363

Attachment 1092364

Attachment 1092365

Attachment 1092366

Attachment 1092367

shawno72 04-14-2013 07:57 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
5 Attachment(s)
More

Attachment 1092380

Attachment 1092381

Attachment 1092382

Attachment 1092383

Attachment 1092384

shawno72 04-14-2013 07:58 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
5 Attachment(s)
More

Attachment 1092385

Attachment 1092386

Attachment 1092387

Attachment 1092388

Attachment 1092389

shawno72 04-14-2013 08:01 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
4 Attachment(s)
Attachment 1092395

Attachment 1092396

Attachment 1092397

Attachment 1092398

RRC 04-14-2013 08:10 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Looks like a good time!
Posted via Mobile Device

Rusbuilt 04-14-2013 10:11 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Wow! Nice looking rides there!

Bennett68C10 04-14-2013 10:38 PM

Re: Shawno72's long overdue 68 daily driver build thread
 
Looks like a great event, wish I could make it one day
Posted via Mobile Device

shawno72 04-15-2013 09:02 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
Thanks guys. We really have a ton of fun at these get togethers.

67cheby 04-15-2013 09:27 AM

Re: Shawno72's long overdue 68 daily driver build thread
 
man that's cool...stinks to be stuck out here in the middle of the country all the action is in TX or CA !


All times are GMT -4. The time now is 10:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com