Re: SoCal checkin' in
I think it will work, just have not been able to confirm yet. Let's say No Limit or legends for April 13th. We need a GTG to get the year started.
|
Re: SoCal checkin' in
Quote:
Ok im in. |
Re: SoCal checkin' in
Im there !! Gotta find the rear driveshaft for my truck!!
Posted via Mobile Device |
Re: SoCal checkin' in
Quote:
Ok half price sale at Ecology is this weekend starting Friday. I missed the one today, so I will be there next weekend. |
Re: SoCal checkin' in
Quote:
|
Re: SoCal checkin' in
Yes Randy mines a longed . I'm def interested. I went to3 junkyards today and didn't find anything.
Posted via Mobile Device |
Re: SoCal checkin' in
Quote:
|
Re: SoCal checkin' in
OK all, I have confirmed with Rob MacGregor at No Limits Engineering for a GTG. Mark your calenders and tell your friends.
Date: April 13th Time: No earlier than 9:00 AM (Saturday hours are 10-2) Place: No Limits Engineering Address: 455 South D Street, Unit 4, San Bernardino, CA. 92401 There is a donut shop right across the street. I'm thinking about having breakfast in the area, If anyone wants to meet for breakfast and or knows of a great place let us know. I've heard that Amapola Rico Taco, at 596 North Mount Vernon Avenue, San Bernardino, CA 92411, is good and about 5 minutes from the GTG. |
Re: SoCal checkin' in
O.K. ;
Duly noted on my calendar . I hope nothing messes with it . |
Re: SoCal checkin' in
Clean I shall be there
Posted via Mobile Device |
Re: SoCal checkin' in
I'm there. Maybe Vdog (Vince) will come and I can get rid of this bumper I've got in my garage.
|
Re: SoCal checkin' in
Quote:
Thats great news Lee. I will be there. Randy maybe this Sunday before the meet, I can make it up there. Pick up the bumper, and the driveshaft for Andy. |
Re: SoCal checkin' in
Any of you going to Del Mar Goodguys this Saturday?
|
Re: SoCal checkin' in
Quote:
|
Re: SoCal checkin' in
Quote:
Posted via Mobile Device |
Re: SoCal checkin' in
1 Attachment(s)
Grille installed.
|
Re: SoCal checkin' in
The grill looks real good vdog!!! Took my driveshaft to get fixed so i will be rolling by next week. See you guys next saturday. Anyone gonna meet up and go together. Im down to meet some people off the 10 fwy. Can meet in san gabriel,el monte ,605 or east of that
Posted via Mobile Device |
Re: SoCal checkin' in
Thanks Andy, im going to install the new right front fender I got before next week also.
I usually take the 605 to the 60 to the 57, then to the 10. Unless I find a route through the 60, I hate the 10. LOL |
Re: SoCal checkin' in
I can do the 10 too. Not even sure where no limit is. Im not far fron the 60 either
Posted via Mobile Device |
Re: SoCal checkin' in
Quote:
Me neither. I will map it out and then we can probaby meet up some where. |
Re: SoCal checkin' in
Quote:
|
Re: SoCal checkin' in
Hey randy forgot to tell you ill pass on that driveshaft. Thanks for offering anyways
Posted via Mobile Device |
Re: SoCal checkin' in
Quote:
Thanks Randy. I painted it back in September or October. Just wanted to freshen it up a bit. Tomorrow I will install the front signal lights and maybe the chrome Chevy front bumper I got that came with the GMC. |
Re: SoCal checkin' in
So whos going to the meet on saturday? I plan on being there. As long as its still on naybe we shoukd get a count of whos gonna be there
Posted via Mobile Device |
Re: SoCal checkin' in
We're all good on our end, come on out this sat. am, 9:00 +
|
Re: SoCal checkin' in
Quote:
Posted via Mobile Device |
Re: SoCal checkin' in
Im there!
|
Re: SoCal checkin' in
1 Attachment(s)
Took a risk and installed a new radio. Needs to be lined up, but im happy for now.
|
Re: SoCal checkin' in
I'll be there.
|
Re: SoCal checkin' in
Is my pinion yolk on my rearend messed up? Just rebuily my driveshaft and noticed damage where the u joint bolts up to. Dont wanna put it back together and have the sh[IMG]http://i1099.photobucket.com/albums/...410_180318.jpg[/IMG]aft fall off again
[IMG]http://i1099.photobucket.com/albums/...410_180318.jpg[/IMG] Posted via Mobile Device |
Re: SoCal checkin' in
Need help !! What do you guys think?
Posted via Mobile Device |
Re: SoCal checkin' in
You need a new yoke.
Posted via Mobile Device |
Re: SoCal checkin' in
It's not perfect. If the u-joint caps seat firmly it should be ok. You may want to replace it sometime in the future but when you do you will want to replace the crush sleeve, seal and the outside pinion bearing. Be sure to not over tighten the u-bolt nuts, it will cause a vibration. I think 25ft.lbs. is the proper torque.
|
Re: SoCal checkin' in
Thanks lee. Thats what i was thinking too. Just wanted to double check with you guys. Damn i still plam kn being there on saturday gotta figure oug what im gonna do
Posted via Mobile Device |
Re: SoCal checkin' in
I'd clean that yoke Hospital Clean before trying to button it up as it's pretty rough looking .
You might find a P/N casted (raised numbers) in it , write that down and take it with you to the P-A-P yard as there's thousands of good yokes and they're easy to change , just remember to change that bad oil seal at the same time and to follow the simple Dealer Flat Rate trick when doing it so you don't ruin the gear mesh . |
Re: SoCal checkin' in
Im going to have to agree, after you clean it up, try mounting the driveshaft, if it mounts up tight and no slop or play. Go for a test drive, if you dont feel any vibration I would say your good until your ready to change it.
But again, you have to feel safe before you can drive your truck. Trust me we all understand. |
Re: SoCal checkin' in
Just joined up, I am in the Mojave desert , where it is cool! LOL
Have some work to do on my 67 , K-20 before I meet up with any get togethers though. I also have to get this 64 carryall going as well. Dennis in Calif |
Re: SoCal checkin' in
Welcome the the forum! Look forward to meeting you.
|
Re: SoCal checkin' in
Welcome from the other side of the 395!
|
Re: SoCal checkin' in
jbclassic, the way the winds blowin here you should see my old registration blowing by anytime! LOL
Dennis in Calif |
All times are GMT -4. The time now is 09:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com