Re: What did you do with your truck today, Part 3
 

I got out there for some rust cleaning getting it ready to prime on the inside of the cab. It's wearing me out!

Brian

Re: What did you do with your truck today, Part 3
 

18 inch from speedway motors. hoping to move some serious air.

Re: What did you do with your truck today, Part 3
 

not a build thread. ive posted on wordpress for years though. my "build" is a lesson in doing stuff wrong over and over. its finally getting there though.

Re: What did you do with your truck today, Part 3
 

whats the overdrive ratio?

Re: What did you do with your truck today, Part 3
 

Wired up the Vintage Air and tested operation of fan and door motions, tested heater valve operations. All good. Ran hoses and fI'll ed to check for leaks. One of my bulk head fitting is leaking as a solder point and now I am waiting my replacement parts.

Removed old starter and installed mini starter to clear exhaust.

Will it ever end!

Re: What did you do with your truck today, Part 3
 

went out to parts truck and removed and sold a couple of parts. drove the truck all day. love my truck.

Re: What did you do with your truck today, Part 3
 

I got my replacement 17 inch fan from speedway today. I was stoked at how quick it got here until I opened it and its the wrong fan. I ordered a clutch style fan and got a solid mount fant. so now I have two brand new fans to return.

Re: What did you do with your truck today, Part 3
 

Went to the Fredericksburg Texas swap meet. Met a local guy who has parts on a truck he has at home I need and we made plans to meet up next time.

Lots of small towns in the area, stopped a antique store and scored this for 40 bucks. First I've seen that wasnt cracked or missing the wheel or gears. Set it up in my workroom inside. Inside all I have are hand tools.

Re: What did you do with your truck today, Part 3
 

More sand blasting, more roloc wheeling. My compressor is on it's last leg, this took me a LONG time.

Brian

Re: What did you do with your truck today, Part 3
 

okay after measuring and being annoyed ive decided to keep the 18 inch clutch fan and return the 17 inch solid mount. when I measured I found my fan isn't in the middle of my radiator. Is there a way to lower where the radiator sits in the core support? seems like that would be a pretty simple way to make all of this work better. im also willing to chop up my new shroud to make it do what I want. oh its on!

Re: What did you do with your truck today, Part 3
 

im sorry but I don't know what this vintage tool is. explanation?

Re: What did you do with your truck today, Part 3
 

Coincidentally I just investigated that today. I was able to determine that by cutting away the inside vertical lip of the core support it would be possible to lower the radiator about an inch (assuming stock radiator and support). I pondered doing it but decided it was a lot of work for minimal gain. Plus we are under fire restrictions here: no cutting, grinding or welding metal. Every day I'm working with towering columns of forest fire smoke and retardant bombers traversing the sky overhead.

Re: What did you do with your truck today, Part 3
 

I had to copy it... hope you can read it...

Re: What did you do with your truck today, Part 3
 

I picked up the painted parts after the rubberized undercoating, painting and clear, was applied... nice to see some color on something!

Re: What did you do with your truck today, Part 3
 

[QUOTE=MiraclePieCo;8311097. Plus we are under fire restrictions here: no cutting, grinding or welding metal. Every day I'm working with towering columns of forest fire smoke and retardant bombers traversing the sky overhead.[/QUOTE]

Fire pic reminds me of why we left the ranch near El Dorado CA. Those who have never lived in a fire area do not know the fear --- stay safe.

Re: What did you do with your truck today, Part 3
 

That sucks! Had that happen to mea few years ago, had to evacuate. Can’t breather, no going outside, everything sucks with fires. Keeps safe

Re: What did you do with your truck today, Part 3
 

Where are you? We chose the soggy OR coast but still fire threats exist. Heavy fog right now- very nice. Still Under fire controls even here with no outside fire hazard stuff permitted. Pics of a restorers garage gutted by fire with all his cars/trucks/tools burnt beyond recognition sticks in mind. I know the old ranch will be gone someday just a matter of time.

FWIW using an LED bulbs (instead of incandescent) in trouble lights etc really prevents gasoline fires in engine compartments PLUS the damn things are near indestructible. (I've tried)

Re: What did you do with your truck today, Part 3
 

ooking at it I decided hacking up and modifying the shroud is a better option.

Re: What did you do with your truck today, Part 3
 

Block sanding doors, tuneing up my painting skills on inner fenders and core support

Re: What did you do with your truck today, Part 3
 

More

Re: What did you do with your truck today, Part 3
 

Core

Re: What did you do with your truck today, Part 3
 

Right on SVR!

Brian

Re: What did you do with your truck today, Part 3
 

anyone else waste a whole day? anyone? just me? decided to install my waterpump pulley and 18 inch fan. removed the radiator only to find that it was mounted incorrectly. I was able to get it mounted correctly which dropped in down about 2 inches. so that's good. then I went to install my new pulley. when I slid it into place the pulley made contact with the water pump body. I used a spacer but that pushed the fan to close to the radiator and the belts didn't line up. I think they sent me a pulley for a long water pump. I checked my order from speedway and it says I ordered a short pump pulley. so that was my day. im annoyed and no closer than I was yesterday.

edit- speedway motors isn't dumb or wrong. I am. I believed I had a short water pump. I thought I hadn't ever seen a long pump. I thought a long pump had a long snout. I looked it up and nope. I measured mine and its 7 inches. its long and im mistaken. im going to try to exchange it and move on with a little more knowledge about my truck.

Re: What did you do with your truck today, Part 3
 

Bummer, sorry to hear it.
I did not waste my day, I worked my ever loving ars off all day long and got the inside of the cab ready for primer! It's coated in osphro metal treatment, it's ready for primer, WHOOO HOOOOO!

Brian

Re: What did you do with your truck today, Part 3
 

It didn't end without a number of welds, it blows me away when I find something like this, glad I did! The mounting point for the steering column was broken. And when I went to weld it (torch) I saw that one area that didn't look cracked was, you see, you could see when it heated that there was a crack with the other side of the crack not heating red. So I welded it, just for fun I heated around the other hole and it had a crack that I hadn't seen too! Wild, glad I did that. Anyway, it's ready for primer prep, WHOOO HOOOO, WHOOOO HOOOOO!

Brian

Re: What did you do with your truck today, Part 3
 

Congratulations on reaching this mile stone. It's what I imagine is one of many to come.
:ww:

Re: What did you do with your truck today, Part 3
 

I have to say, the fenders and bed are going to be like having an icecream cone compared to this cab!

Brian

Re: What did you do with your truck today, Part 3
 

Well you may not like it taking so long, but we're glad if it keeps you coming back here daily and entertaining us with your contributions.

Re: What did you do with your truck today, Part 3
 

LOL, well you are in for a hell of a lot of entertainment!

Brian

Re: What did you do with your truck today, Part 3
 

Got out there for probably literally 5 minutes, I am beat. But did some grinding on welds and cleaning of crap on the firewall.

Brian

Re: What did you do with your truck today, Part 3
 

Doing better than me. I ordered some lights for the garage (Cause its hot when the suns out) and no power cords came with it. So I am waiting patiently for them so I can return to the garage.

:waah:

Re: What did you do with your truck today, Part 3
 

Had a short visit from Ogre (Kirt) and his wife Terry today, they were traveling thru Boise. We got to spend a few minutes looking at the my truck and bench racing in general while Terry got a tour of the garden with Joan. Did not think to get a picture. Unfortunately for me he was not driving his great yellow truck. It was a compliment to me that it was obvious from comments he made he has spent a good amount of time looking at my build thread and other posts. Great guy, hope to maybe get up to his territory and see the truck in person. Did not even comment about how much of a mess the shop was from side tracking wood working projects!

Re: What did you do with your truck today, Part 3
 

That's great to get to meet other members...Jim

Re: What did you do with your truck today, Part 3
 

Cool, I will be in Boise in a year or so with my truck and I be driving it every day there. :D

Brian

Re: What did you do with your truck today, Part 3
 

So today I just got out there to study the hood hinges, had them on my mind at work. :D Sooooo, the cab is sectioned under the hood hinge, bringing the hinge down closer to the top of the fender.

My plans have been to section the sides of the hood simply cutting off the bottom of the support in the hood off at the bottom bringing the hinge mounting points down, just as the they have been on the cowl.

The first photo shows a line below the lower bolt where the hinge mounts on the hood. That point is 2.5 inches up from the bottom, the amount the cab was sectioned.

The second photo shows how the cowl will need to be modified by cutting or recessing this area so the hinge can do down as far as it use to before it was lower down onto the top of the fender mounting.

I am thinking this would keep all the geometry the same as it was. Does this make sense to you guys?

Brian

Re: What did you do with your truck today, Part 3
 

I cleaned and painted the glove box door and speaker grille, then trimmed and installed the upper radiator hose.

Re: What did you do with your truck today, Part 3
 

Too complicated for me. It'd sure be nice if you had a scrap hood to experiment on. Of course, if your calculations are wrong your current hood WILL be scrap ;-)

Re: What did you do with your truck today, Part 3
 

Now that just looks nice, good looking pieces are always fun to install, that is if they don't get scratched. If it was mine it would be scratched. I cant have nice things.

Re: What did you do with your truck today, Part 3
 

+1

Re: What did you do with your truck today, Part 3
 

Hell yeah, that is a happy moment when you bolt that in!

Brian