The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   What did you do to your truck today? (https://67-72chevytrucks.com/vboard/showthread.php?t=368988)

dnorris009 06-19-2010 06:48 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Malibob (Post 4037130)
I took new pics. Here is my NEW bed and New seat!!!]

Oh man, I Love that truck!!!

I put Stovebolt double barrels on my girl today....
http://i255.photobucket.com/albums/h...70chevy037.jpg
http://i255.photobucket.com/albums/h...70chevy038.jpg
http://i255.photobucket.com/albums/h...70chevy036.jpg
http://i255.photobucket.com/albums/h...70chevy039.jpg

Apache63 06-20-2010 06:02 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by willyp (Post 4035948)
Put some POR-15 on my new lower control arms and pwr steering brackets.......getting ready for a 4/6 drop and disk brake/pwr steering conversion.

on your lower control , is that chrome???


Pat

lakeroadster 06-20-2010 07:15 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by dnorris009 (Post 4038621)
I put Stovebolt double barrels on my girl today....

We need a video! Let's here those puppies!

Chevy Fleetside 06-20-2010 11:16 PM

Re: What did you do to your truck today?
 
I got the 66 fired up today. Was nice to hear is rumble through the open headers. :metal: Now I just have to get the tranny all buttoned up. I did take a short video of it but have to upload it. Now I just have to figure out how.. :lol:

jonzcustomshop 06-20-2010 11:36 PM

Re: What did you do to your truck today?
 
worked on a tune up of the 63... the distributor has had ductape on it since I got it... it ran ok and I had other things going...I looked into it today, and the tape was holding the cap on:lol:one screw missing, and on the other side a wood screw-haha, you gotta love farm trucks!
so the rotor was tearing the sh*t out of the cap since itwas just loose on there!
new cap rotor, and wires made it run tons better, tomorrow I chase that pesky acellerator pump, and time it, and it might run like new!

willyp 06-21-2010 09:01 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by Apache63 (Post 4039273)
on your lower control , is that chrome???


Pat

not chrome, just gloss black POR-15

http://www.por15.com/

malibob, im digin that seat. did you recover it?

Jdeere16 06-21-2010 09:54 AM

Re: What did you do to your truck today?
 
2 Attachment(s)
Found low oil pressure after engine warm up.... pulled the motor only to find out more bad news. Cam bearings shot, main bearings shot, # 7 piston wall no bueno. :censored:

DPowers 06-21-2010 10:18 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jgh64pkup (Post 4025888)
where do you find a windshield for that cheap
ive been looking everywhere and all i can find is over 200 bucks

Sorry- missed this one or would have got back with you sooner-

http://www.windshieldstogo.com/

They have warehouses throughout the US that you can pick the glass up and save shipping.

jgh64pkup 06-21-2010 12:53 PM

Re: What did you do to your truck today?
 
thanks

rendus 06-21-2010 08:53 PM

Re: What did you do to your truck today?
 
Replaced the ignition switch and the starter solenoid trying to sort out my starting problems only to discover the wire plug next to the heater box was unplugged the whole time! :banghead:
I thought about taking both parts back but I didn't feel like uninstalling them plus they were cheap and they'll probably last another 43 years anyway.

Turkey 06-21-2010 08:57 PM

Re: What did you do to your truck today?
 
finished the floor shifter install. much better now!!

willyp 06-22-2010 04:09 PM

Re: What did you do to your truck today?
 
4 Attachment(s)
picked up my grill and trim from the powder coater this morning, then sandblasted my headlight backing plates, headlight mounts and rear license plate bracket. gonna paint them this afternoon then assemble them.

62 Bowtie 06-22-2010 08:47 PM

Re: What did you do to your truck today?
 
Willy P is the grill powder chrome or silver? Thanks, Tony

willyp 06-22-2010 09:20 PM

Re: What did you do to your truck today?
 
2 Attachment(s)
the color is bengal silver with a coat of clear. the "chrome" looked like tin foil to me. a couple better pics..

DPowers 06-22-2010 10:46 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by willyp (Post 4043740)
the color is bengal silver with a coat of clear. the "chrome" looked like tin foil to me. a couple better pics..

Those look good:metal:

62 Bowtie 06-22-2010 11:31 PM

Re: What did you do to your truck today?
 
1 Attachment(s)
heres a pic of a annodized grill and it does have a tin look to it thats why I asked thinkin about doin my grill powder chrome

jonzcustomshop 06-23-2010 12:35 AM

Re: What did you do to your truck today?
 
I have been chasing fuel guage issues today...
here is a thread I started in electrical, if you have any suggestions it would help!
http://67-72chevytrucks.com/vboard/s...d.php?t=408758

1Bad62Pro/Street 06-23-2010 06:03 AM

Re: What did you do to your truck today?
 
Ordered a Edelbrock Carburetor Rebuild Kit yesterday for my Edelbrock Carburetor.
Once we get the carburetor rebuilt I will take a video of the exhaust sound of the HOME MADE EXHAUST!
http://www.jegs.com/images/photos/300/350/350-18064.jpg

http://www.jegs.com/i/Edelbrock/350/1477/10002/-1

http://67-72chevytrucks.com/vboard/s...44#post4044344

1Bad62Pro/Street 06-23-2010 06:14 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by 62 Bowtie (Post 4044029)
heres a pic of a annodized grill and it does have a tin look to it thats why I asked thinkin about doin my grill powder chrome


I have been thinking the same thing.
http://67-72chevytrucks.com/vboard/a...1&d=1276708760
My Original Painted grill is in near perfect condition! (Rare)
http://67-72chevytrucks.com/vboard/a...1&d=1276707633
Advanced Plating
1425 Cowan Court
Nashville, TN 37207
http://www.advancedplating.com/resto...rill_resto.htm

Tri-City Plating Co., Inc.
218 E. Mill St.
Elizabethton, Tennessee 37643
http://www.tricityplating.com/

willyp 06-23-2010 08:56 AM

Re: What did you do to your truck today?
 
62, that grill looks good still. sweet rig too!

Chevy Fleetside 06-23-2010 10:01 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by jonzcustomshop (Post 4044145)
I have been chasing fuel guage issues today...
here is a thread I started in electrical, if you have any suggestions it would help!
http://67-72chevytrucks.com/vboard/s...d.php?t=408758

On the 66 I have, whenever I turned the key on the gas gauge would shoot up to the F mark real fast. I thought maybe just a short somewhere. Well I decieded to stick a hose in the tank to see how much gas was in the truck and after I pulled the hose out about 6" there was fuel on it. Then I shined my flashlight down the fill tube and I could see the gas. OH bonus... A full tank of gas. Gas gauge problem solved.... :lol: I just uploaded this to youtube. It is the first engine running of the truck since I have had it.

Dinos63 06-23-2010 11:20 AM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by willyp (Post 4043245)
picked up my grill and trim from the powder coater this morning, then sandblasted my headlight backing plates, headlight mounts and rear license plate bracket. Gonna paint them this afternoon then assemble them.

duuuude !!! Killer

1Bad62Pro/Street 06-23-2010 12:00 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by willyp (Post 4044431)
62, that grill looks good still. sweet rig too!

Thanks Bud....
Building her Carolina Style!!!!!!!
Wish I a little bit more money to put in her!!!!
I would make her fish tail!!!!!!

http://public.bay.livefilestore.com/...res.gif?psid=1

DRTYRAT30 06-23-2010 07:20 PM

Re: What did you do to your truck today?
 
Spent some time getting the frame stripped clean of years of grime and oil leaks. Used engine brite, super clean, wire brush, putty knife and finished it with a wire brush wheel on my 4 1/2" grinder. I'm going to wipe it down with acetone and prime and paint it today.

http://i148.photobucket.com/albums/s...963C100011.jpg

http://i148.photobucket.com/albums/s...963C100013.jpg

markeb01 06-23-2010 08:43 PM

Re: What did you do to your truck today?
 
Thanks to Bob at Accessoryland, a pair of new old stock inside spotlight brackets (8205 & 8206RH) arrived today. In addition to the mint condition brackets, even the 1960 era slot head mounting screws were included. After decades in wax paper bags, the brackets are now permanent features in my cab.

TwiggyTheDrummer 06-23-2010 09:02 PM

Re: What did you do to your truck today?
 
Quote:

Originally Posted by DRTYRAT30 (Post 4045288)
Spent some time getting the frame stripped clean of years of grime and oil leaks. Used engine brite, super clean, wire brush, putty knife and finished it with a wire brush wheel on my 4 1/2" grinder. I'm going to wipe it down with acetone and prime and paint it today.

http://i148.photobucket.com/albums/s...963C100011.jpg

http://i148.photobucket.com/albums/s...963C100013.jpg

Man, I remember doing that with mine. It was hot as hell outside but that was one job that makes you feel good once you're done. What are you painting it with?

jgh64pkup 06-24-2010 12:11 AM

Re: What did you do to your truck today?
 
started it and saw how quick and high i could rev it
it gets to 7 grand pretty fast :D

DRTYRAT30 06-24-2010 12:26 AM

Re: What did you do to your truck today?
 
2 Attachment(s)
Quote:

Originally Posted by TwiggyTheDrummer (Post 4045451)
Man, I remember doing that with mine. It was hot as hell outside but that was one job that makes you feel good once you're done. What are you painting it with?

Just some Rustoleume.

ruffrida2005 06-24-2010 12:30 AM

Re: What did you do to your truck today?
 
your gonna blow that motor Gage.

Well it was sad what I did to my truck today. I pulled all of my SD front crossmember and my disc brake set up off, so I could sell it. Packed up the air ride kit too. It's all going to a good home though.

jgh64pkup 06-24-2010 12:31 AM

Re: What did you do to your truck today?
 
well that sucks your selling it

Vernski 06-24-2010 12:58 AM

Re: What did you do to your truck today?
 
1 Attachment(s)
Didn't do anything to my truck today, but got started on my shop and I'm excited about that. Will be nice to stay warm this winter....Vernski:two:Attachment 599139

65Gregg 06-24-2010 09:27 PM

Re: What did you do to your truck today?
 
Started the rebuild and drop process on my 65 frontend today. I removed everything except the tie rods and center link,ran out of time. Now comes the clean up and rebuild part. I'm trying to decide what kind of control arm bushings to use, stock, urethane, poly or polygraphite.....

65Gregg 06-24-2010 09:32 PM

Re: What did you do to your truck today?
 
4 Attachment(s)
Pics added including side view of rear end with it's new altitude or lack of....

jgh64pkup 06-25-2010 12:08 AM

Re: What did you do to your truck today?
 
installed some headers on my dads 67
putting exhaust on it tomorrow
super 40 flowmasters

cb1965 06-25-2010 11:06 PM

Re: What did you do to your truck today?
 
got my drop spindles from summit. ordered them wednesday got them on thursday.:bann::D very happy.
couple hours at it and finito!!!

http://i848.photobucket.com/albums/a...project308.jpg

4-1/2 front & 4 in back

http://i848.photobucket.com/albums/a...project320.jpg

1Bad62Pro/Street 06-26-2010 03:50 PM

Re: What did you do to your truck today?
 
(((( 1Bad62Pro/Street ))))
One Bad Mamma Jamma
Project: "Full Metal Yellow Jacket"
Breathing life back in my Ole' 62 after it has sat for 4 Years......
Have not rebuit the carb yet!!!
Still out of tune!
1962 CHEVY C10 1/2 TON STEPSIDE NOSTALGIA PRO/STREET
PROJECT: "FULL METAL YELLOW JACKET"
UNDER CONSTRUCTION
http://67-72chevytrucks.com/vboard/s...d.php?t=321173

http://2tb6gq.bay.livefilestore.com/...mma.jpg?psid=1

62 Bowtie 06-26-2010 08:02 PM

Re: What did you do to your truck today?
 
Sweet, sounds good. Back in the saddle again :metal:

ranger374 06-26-2010 08:56 PM

Re: What did you do to your truck today?
 
Got my entire cab blasted today from to to bottom inside out and under:lol:

heymoe 06-26-2010 09:54 PM

Re: What did you do to your truck today?
 
5 Attachment(s)
Lets see, I finished half of my 2 1/2" polished stainless exhaust and mounted my cab. Let me know what you think.

scotts62 06-26-2010 09:55 PM

Re: What did you do to your truck today?
 
Looks awesome!!! :metal::metal:


All times are GMT -4. The time now is 02:48 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com