Re: 198Plus build
Can you body wax the rust on the inside of the braces that you can't get to or shoot POR up in there?
|
Re: 198Plus build
Quote:
|
Re: 198Plus build
Your right, but since my grandfather bought it new and left it to my dad and then my Dad left it to me...........I'm just sayin ;)
Quote:
|
Re: 198Plus build
Quote:
|
Re: 198Plus build
Quote:
|
Re: 198Plus build
1 Attachment(s)
Here is the left floor that has been replaced prior.
|
Re: 198Plus build
:smoke: I see Alan has resorted to the Boring Electron Microscope for the last shot.
|
Re: 198Plus build
Quote:
|
Re: 198Plus build
I'm finished with my new shop logo.......I think..... :fb:
http://i88.photobucket.com/albums/k1...apes1/Like.jpg |
Re: 198Plus build
The black box and then the black oval behind the text does not seem right. Does it not stand out enough without them? Maybe if they were both the same shape? Overall I like the concept & colors.
|
Re: 198Plus build
Looks saweet!! You gonna put that logo on the door of your old truck when it gets done?
|
Re: 198Plus build
Now that I look at it, you're right........Changes in the works ;)
Quote:
|
Re: 198Plus build
Thanks Allan.........Only thing going on my doors will be wax ;)
Quote:
|
Re: 198Plus build
Nice shot Alan
As we know,when the support rots out (and/or the floor) the small tube that surrounds the mounting bolt is usually rotted too. That piece doesn't come with the replacement support nor the floor section. Can you post up some dimensions on this tube,ie length, diameter and wall thickness,also I assume it's welded to the support? I have never seen this part in any calalogs Thanks T |
Re: 198Plus build
Looks great. Have a magnet sign made so you can take it off your truck when you don't want it. Just use it when your parked in front of your shop. Should be an attention getter.
|
Re: 198Plus build
1 Attachment(s)
Quote:
More updates coming in just a few minutes........... |
Re: 198Plus build
I advised Ronnie that we should go ahead and cut out the metal that had already been replaced. That was a good idea. Because the drivers side wasn't welded to the cab support.
Here it the driver side patch that was removed. Notice the spot welds, not good. http://i88.photobucket.com/albums/k1...b/DSC03190.jpg Here's the double floor on the drivers side. http://i88.photobucket.com/albums/k1...b/DSC03192.jpg Still something going on on the Left kick panel to fire wall. http://i88.photobucket.com/albums/k1...b/DSC03195.jpg Did some more digging and found this. http://i88.photobucket.com/albums/k1...b/DSC03198.jpg http://i88.photobucket.com/albums/k1...b/DSC03196.jpg The passenger side was welded better. http://i88.photobucket.com/albums/k1...b/DSC03187.jpg http://i88.photobucket.com/albums/k1...b/DSC03188.jpg I believe I got all the patch work out on the passenger side. The sand blaster might reveal something on the pinch weld. It is loaded with filler. http://i88.photobucket.com/albums/k1...b/DSC03189.jpg I ground some of the filler on the A post gutter. I knew there would be issues after seeing it covered up. They need to be drilled off and replaced. I have to look to see if they are available. Both side are the same. http://i88.photobucket.com/albums/k1...b/DSC03199.jpg http://i88.photobucket.com/albums/k1...b/DSC03200.jpg More decisions to be made in the next post........... |
Re: 198Plus build
Firewall decisions................Need to determine which holes to weld up. Here are some pics for Ronnie to edit and circle which ones he wants filled.
Rt side http://i88.photobucket.com/albums/k1...b/DSC03173.jpg Lt side http://i88.photobucket.com/albums/k1...b/DSC03172.jpg What about these extra holes somebody added? http://i88.photobucket.com/albums/k1...b/DSC03203.jpg I know the clutch rod goes thru one of these but what is the other? Maybe the speedometer cable goes in the smaller one. http://i88.photobucket.com/albums/k1...b/DSC03202.jpg Here are some of my recommendations. Double check me Ronnie. http://i88.photobucket.com/albums/k1...b/DSC03201.jpg Referrence pics of mine. http://i88.photobucket.com/albums/k1...b/DSC03178.jpg http://i88.photobucket.com/albums/k1...b/DSC03177.jpg http://i88.photobucket.com/albums/k1...b/DSC03176.jpg http://i88.photobucket.com/albums/k1...b/DSC03175.jpg |
Re: 198Plus build
Well it's got to get better :lol:
|
Re: 198Plus build
Ronnie wanted the tar removed from the bottom of the cab. It's a good idea to remove this stuff before the blaster. The blaster won't remove it.
Before http://i88.photobucket.com/albums/k1...b/DSC03204.jpg Driver side after http://i88.photobucket.com/albums/k1...b/DSC03207.jpg Passenger side had more on it. http://i88.photobucket.com/albums/k1...b/DSC03206.jpg |
Re: 198Plus build
Firewall on your truck rocks.:metal:
|
Re: 198Plus build
Thank you Alan
I have my floor piece and support so shouldn't be too hard to get the right length. as for wall thickness I'll just go overkill, 1"x .125w T |
Re: 198Plus build
Quote:
|
Re: 198Plus build
Quote:
Quote:
|
Re: 198Plus build
Parts on the way Alan ;) Since there's nothing going on with my build thought I would share some pic's of my shops next few projects.
Our first total repaint.......More pic's when finished http://i88.photobucket.com/albums/k1...DSC_0609-1.jpg Total restoration starting soon. http://i88.photobucket.com/albums/k1...1/DSC_0594.jpg http://i88.photobucket.com/albums/k1...1/DSC_0590.jpg http://i88.photobucket.com/albums/k1...1/DSC_0592.jpg New shop bike :lol: http://i88.photobucket.com/albums/k1...1/DSC_0599.jpg My office if I ever get done http://i88.photobucket.com/albums/k1...1/DSC_0603.jpg |
All times are GMT -4. The time now is 01:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com