![]() |
Re: What did you do to your truck today? Chapter II
I am loving the seasonal wall paper ! :lol: .
I spent some hours yesterday cleaning 292 engine covers & stuff in the solvent tank and made a serious discovery ~ the 1977 timing chest is *much* thinner steel than is the old 1964 one , there are numerous changes in how it was manufactured too so I'll be taking the extra time to de rust the 1964 one and use it on my '69 . The good thing is : the lighter '77 cover didn't leak atall so it's a good used part , maybe I'll install a new seal and re paint it correct GMC/Chevrolet Red and offer it cheaply on E-ay . I hope to get more tear down works done to - day , the sun is rising so my achy old bones and injuries might give me a break in the pain dept . Truly , these ARE ' Mistresses ' ! . Cheaper and BETTER than any modern truck I can buy . |
Re: What did you do to your truck today? Chapter II
2 Attachment(s)
Added one more to the fleet. :lol:
|
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Attachment 1338145
started putting my front clip together....also gave Mary a lil more rake.... |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
Quote:
all the repops i've seen "like mine" have an upward bow. Thanks Joe |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
ole dollor has been setting for a few weeks , next year I am going to pull the head off and do a valve job... been busy taking care of the wife after her back surgery ,and just about the time we got her staples out , my kick starter in my chest went bad , and I just got out of the hospital from having a new defb. put in wires and all. the old wires were broke and it went off 2 times this year . so it may be a while before I can enjoy working on old dollor again.
Hope every one has a Very Merry Christmas ... |
Re: What did you do to your truck today? Chapter II
A bunch of little stuff ..
1) Started chipping away at the cheap respray that's sitting on top of the OG hugger orange paint 2) Restored my gauge cluster. DEciding whether to get a new bezel or keep the sligthly patina'd one I have 3)Pulled out the rear "CHEVROLET" tailgate panel, scraped off all the old chipped/faded/cracking woodgrain decal 4) scuffed up the inner fenders for paint. The PO sprayed them gloss black with a rattle can... |
Re: What did you do to your truck today? Chapter II
Quote:
Best of the season to you, Brother. |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
3 Attachment(s)
Used tailgate installed after painting, sport bumper, and hidden hitch. Looks so much cleaner now. Will get the tailgate trim and letters on soon.
-Jeff |
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Pulled the drivetrain and front end yesterday. Today the drivetrain went to its new owner.
Attachment 1338642 |
Re: What did you do to your truck today? Chapter II
Nothing to the truck but I finally went and bought a garage heater and mounted it.. tomorrow Ill have to push the Vette out so I can get to the gas line stubbed into the wall behind it and run it to the heater and fire that bad boy up. No more freezing days and nights out there :metal:
|
Re: What did you do to your truck today? Chapter II
finished powder coating my hurricane/outlaw/turbine rims. Now the search is on for tires,after I get the kids cars fixed( home from school)
|
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Attachment 1338884
Picked me up a ghetto grandpa shell! |
Re: What did you do to your truck today? Chapter II
2 Attachment(s)
New wheels and door panels.
18x8 up front and 18x9.5 in the rear |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Finally got to put my cab on my frame....it's only been 3 years and 10 months since tear down....wire harness is next I'd say..oh ya, I got my engine started too after new forged crank and roller cam, custom TPI fuel injection. I had it started without the cab on, I just rigged up a tank and battery...sounds healthy! (406 ci).
|
Re: What did you do to your truck today? Chapter II
Just drove mine. Cleaned the windows, etc.
|
Re: What did you do to your truck today? Chapter II
Installed Porterbuilt Inner Frame Structure:
http://i131.photobucket.com/albums/p...ps8ab440b2.png http://i131.photobucket.com/albums/p...ps75aa96aa.png |
Re: What did you do to your truck today? Chapter II
still stripping paint.... so much paint.... :m6:
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
....more stripping.... Im thinking that when I get to the bed Im gonna get some paint stripper....
The cab is completely stripped except under it and Ill get that when we lift it off the frame. The right front fender is ordered. Once I get my "after Christmas bonus Ill order the cab corners and inner rocker patches and the lower inner left side door patch along with the bed front. Still deciding on doing the wood bed floor or not. |
Re: What did you do to your truck today? Chapter II
I realized it's unlikely I'll get my 292 overhaul finished before the paint Jail needs a drive line to install so I hoisted the old 250 CID i6 onto an engine stand and began stripping it down and cleaning the engine and all those ding dang brackets.....
Whew , I'm tired and still have lots to do plus I need to find a pair of those side plates that fit 194/230/250 engines ~ this engine has chrome covers and i want stock . |
Re: What did you do to your truck today? Chapter II
3 Attachment(s)
1. get the bbc up and running.:metal:
2. get the truck to move under its own power:metal: 3. more important...got it too stop:lol: 4. putted through the back roads with the lil' guy riding shotgun. all went great on its maiden voyage after 2 yrs & 2 months of being torn down. you can see the big kid just had to follow me around in his 67 swb;). I'm building this truck for the lil' guy he was super thrilled when i took him out and showed him it starts and drives on christmas afternoon. pretending to be fiddling with something I asked him too turn the key (he had no idea it was gonna start) and when it crackled to life you all should've seen the biggest suprized smile i got from him:metal: the granddaughter was waiting her turn for a ride. unfortunately very much sanding and body work to do yet....ugh |
Re: What did you do to your truck today? Chapter II
2 Attachment(s)
Got the frame back from being water blasted, taking front and rear suspension, related parts off of the frame.
|
Re: What did you do to your truck today? Chapter II
.
@ midniteblues : GOOD DADDY ! you're teaching him well no matter what he goes off to do in life . . @ Teninchbluff : what is this ' water blasting ' you speak of ? . TIA , |
Re: What did you do to your truck today? Chapter II
Ill give ya 3 guess what i did today...
|
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Started pulling all the salvageable parts off of the ol' 283. Opened her up, found out she's a very dirty girl.
|
Re: What did you do to your truck today? Chapter II
working on A arms wish some one would give advice or tell me a good place to find it been along time for me doing it all on me
sandblasted them got all new hardware 1970 c 10 SWBSS 350/300 375trans |
Re: What did you do to your truck today? Chapter II
Quote:
|
Re: What did you do to your truck today? Chapter II
That 283 is *very* clean ! .
Dirty engines have packed in gooey crap you have to scrape out with a spatula . To - day I worked a bit more on my old 250 i6 ~ I found what I think are rebuilder's tags , one on the back of the cylinder head , another in a welch plug on the left side of the block . Everything was going O.K. , I was scraping off old crispy paint , then i wire brushed it a bunch then I tried to roll the engine a few feet for the next application of degreaser when CRASH ! the ding dang El Cheapo three legged engine stand tipped over , dumping my engine onto the cement driveway :mad: . The chrome rockerbox is now all bashed in , too bad but I didn't like it anyways and was going to give it away . I hoiseted the engine and stand back up and cleaned some more , this thing is going to look really spiffy when I'm done with it . |
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Put the grill and front bumper on, also took it on its maiden voyage yesterday afternoon.
|
Re: What did you do to your truck today? Chapter II
5 Attachment(s)
Got a sand blast cabinet for christmas, put it to work on blasting and coating parts. Check out the how-to I just finished to see how you can do it in your garage. http://67-72chevytrucks.com/vboard/s...d.php?t=654423
Here are some pictures. of my progress. Attachment 1341605 Attachment 1341606 Attachment 1341607 Attachment 1341608 Attachment 1341609 |
Re: What did you do to your truck today? Chapter II
1 Attachment(s)
Finishing the new door bottoms...
|
Re: What did you do to your truck today? Chapter II
Brought this home:
http://67-72chevytrucks.com/vboard/a...1&d=1419114625 Then took it apart: http://67-72chevytrucks.com/vboard/a...1&d=1419658589 http://67-72chevytrucks.com/vboard/a...1&d=1419658589 |
All times are GMT -4. The time now is 08:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com