The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 39 of 44 « First 293435363738 39 4041424344
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   4x4 Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=141)
-   -   Project 68 k10 LWB..aka "The Hulk" (https://67-72chevytrucks.com/vboard/showthread.php?t=659275)

First c10 04-15-2020 01:08 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
https://youtu.be/OHi15zrb8JI
Quote:
Originally Posted by First c10 (Post 8691793)
Hey guys well trying to get back on the truck.
Built a Jig for the box to sit on while I fab up some goodies. I don't want to work on the bed while its on the frame.

I used some 3/4" Pine to mount the bed sides and use some wood and a ratchet strap to square up the bedsides to the frame rails. Next it to take a dent out of the front panel so I can get it mounted. This is mock up phase as I have a few mods I am going to do on the bedsides.
More to come!!!
Hey guys a few weeks back I said I had some custom mods I was planning to the bed.
Well this is the completed metal work phase.
I have taken a lot of pictures but figured a video would be the best.
Let me know what you think. I now have to build the inside box portion with the latch and striker.

Custom bedsides

DWilbur 04-15-2020 01:23 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
That’s really cool mod on the bed sides

landarts 04-15-2020 10:50 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Very cool and great metal work there. You have really added a nice feature to your build, cant wait to see the finished product. Very Well done!

First c10 04-15-2020 11:41 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
5 Attachment(s)
Thank you Guys, its a lot of work!!
Here are a few pictures

First c10 04-15-2020 11:42 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
5 Attachment(s)
More pictures

First c10 04-15-2020 11:43 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
2 Attachment(s)
Even more pictures!

landarts 04-15-2020 12:23 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Are the hinges from something like suicide door hinge kit?

First c10 04-15-2020 12:33 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
5 Attachment(s)
Yes the kit is an Autoloc suicide door hinge kit. I also have the Autoloc Bear Claw Latch kit.
I will install the latch kit after I build the covered box inside the bed.

Richard 04-16-2020 02:57 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Really cool bed mod. Brings back memories of The Fall Guy. One of my favorite shows in my youth. That truck had the hinged storage compartments.

First c10 04-16-2020 11:05 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Quote:
Originally Posted by Richard (Post 8717518)
Really cool bed mod. Brings back memories of The Fall Guy. One of my favorite shows in my youth. That truck had the hinged storage compartments.
10-4 Richard! That's where the idea came from.... I always loved that truck mod!

derotoreut 04-16-2020 09:42 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
This is crazy stuff. Carry on. Can't wait.

TA_C10 04-16-2020 11:56 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Your mod looks good.

Replica of fall guy truck. Built by students from a nearby college where I'm originally from. They did the truck bed doors correct.


.

First c10 04-17-2020 12:49 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Quote:
Originally Posted by TA_C10 (Post 8718153)
Your mod looks good.

Replica of fall guy truck. Built by students from a nearby college where I'm originally from. They did the truck bed doors correct.

The Fall Guy

.
Yes thank you!
5 min into the video he shows the doors. There is also a video of when they were fabricating them on YouTube.

I am going to put power actuators to open the door rather than an actual door handle or button.

Richard 04-17-2020 12:49 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Quote:
Originally Posted by TA_C10 (Post 8718153)
Your mod looks good.

Replica of fall guy truck. Built by students from a nearby college where I'm originally from. They did the truck bed doors correct.

The Fall Guy

.
Thanks for that link. Really enjoyed watching it! Wife got me season one and the European season two. Want to watch the rest of the series again! Apologize for derailing the thread.
Richard

First c10 04-17-2020 01:01 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
4 Attachment(s)
I started to build the box that the doors will open up for. I matched the inside of the bed contour and added 5/16 Nutserts to bolt the panel in. I will finish the top and bolt it in as well.

TA_C10 04-17-2020 09:43 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Fall Guy, Dukes of Hazard, Night Rider, and Chips. My favorite shows growing up. Not many know about the Fall Guy doors even if you watched the show most probably don't remember that.

Was there any documentation on that truck you found from original? Would be cool to see some of that info. I think your hinges look really good. What was your reason to put the doors in the back vs the front?

.

First c10 04-17-2020 12:42 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
2 Attachment(s)
Quote:
Originally Posted by TA_C10 (Post 8718321)
Fall Guy, Dukes of Hazard, Night Rider, and Chips. My favorite shows growing up. Not many know about the Fall Guy doors even if you watched the show most probably don't remember that.

Was there any documentation on that truck you found from original? Would be cool to see some of that info. I think your hinges look really good. What was your reason to put the doors in the back vs the front?

.
I watched them all. The doors in the bed were only in a hand full of episodes so you would have to be a true fan of the show to notice them...
these doors are basically the same as the fall guy truck. The doors open suicide to the front doors and are at the front of the bed.

First picture is from the tailgate end of the bed looking towards the cab.
Second picture(with the 1" tubing) if from the cab end looking towards the tailgate.

TA_C10 04-17-2020 01:26 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Good grief.. My eyes must have been playing tricks on me. I see that now :dohh:


.

DWilbur 04-22-2020 01:19 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
The bed is looking very cool. can't wait to see how it turns out.

First c10 04-23-2020 12:13 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
4 Attachment(s)
Quote:
Originally Posted by DWilbur (Post 8722683)
The bed is looking very cool. can't wait to see how it turns out.
Thank you

I can’t wait either. I bet I have more than 100 hours in it.

Well here are a few more pictures. I was able to get the doors adjusted and got the box complete but forgot to take pictures today. I will get some tomorrow. Looking pretty good and working good also.

First c10 04-23-2020 12:21 AM
Re: Project 68 k10 LWB..aka "The Hulk"
 
Ok here is a video of the door popping open when powered up.

https://youtu.be/oEwiRGDbiUY

First c10 04-27-2020 02:55 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
2 Attachment(s)
A little update.
I was able to get the the bed storage box built. My body guy started the body work. I did have to tighten up the door gap on the driver side.
After a few hours of work on the front head panel I decided to order a replacement. This front panel now really doesn't support anything..... the original was going to take too much work to get straight. Hopefully it will be in today or tomorrow.

First c10 04-27-2020 03:01 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
1 Attachment(s)
I had to take a break from the metal work on the bed. I polished an original '72 under rear window trim and got it installed. Looks good separating the two colors.

Next to install the side mirrors I bought from Mikes Billet Mirrors.

derotoreut 04-27-2020 04:58 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
I love watching this. Keep up the good work.

DWilbur 04-27-2020 05:04 PM
Re: Project 68 k10 LWB..aka "The Hulk"
 
The chrome trim looks good.


All times are GMT -4. The time now is 01:49 AM.
Page 39 of 44 « First 293435363738 39 4041424344
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com