Re: Daverods project 66
 

Just do this [img]paste the properties of the picture here[/img]

You have to do it exactly like this.

Here's the properties.

http://67-72chevytrucks.com/vboard/i.../head_left.jpg

Now put this in front of the properties after you paste it. [img] then [/img] after it.
And you get this.
http://67-72chevytrucks.com/vboard/i.../head_left.jpg

Re: Daverods project 66
 

Man you need to clean that place up.:lol: It looks like a bomb went off in there. Can't even see any good posters from that angle. If your going to post at least post somthing of intrest. I've got a least 3 rear ends sitting in my own garage.

Re: Daverods project 66
 

:haha:
strodder is that an impala frame

Re: Daverods project 66
 

I'm working my a** off. Almost done with this one. It was a real PITA. :waah:

Re: Daverods project 66
 

[quote=Strodder;3572371]Just do this [img]paste the properties of the picture here[/img]

You have to do it exactly like this.

Here's the properties.

http://67-72chevytrucks.com/vboard/i.../head_left.jpg

Now put this in front of the properties after you paste it. [img] then [/img] after it.
And you get this.
http://67-72chevytrucks.com/vboard/i.../head_left.jpg http://67-72chevytrucks.com/vboard/i.../head_left.jpg http://67-72chevytrucks.com/vboard/c...tar51995_3.gif Cool I can post again. I learned somthing nw. My brain hurts.

Re: Daverods project 66
 

Dave, If it make you feel better, I cannot post attachments either. Strodder must be riding the special bus these days..

Re: Daverods project 66
 

Do it this way [img] enter the properties of the image then [/img] Right click on the picture properties is at the bottom, select all , then copy the address and paste between the two img things.


http://67-72chevytrucks.com/vboard/c...tar51995_3.gif

http://67-72chevytrucks.com/vboard/c...tar53061_1.gif Strodder is like a voodoo GOD.
http://photos.smugmug.com/photos/16625334_aA6U8-S.jpg My Hero. Life is good again

Re: Daverods project 66
 

http://67-72chevytrucks.com/vboard/a...1&d=1254263231 Ya now that's a rear end. Thats right I'm a posting. It says "You may not post" It lies.

Re: Daverods project 66
 

Re: Daverods project 66
 

Atta boy Dave. :thumbs::thumbs:
It was easy now that you know. But I don't have to do it that way. I still have the icon. http://67-72chevytrucks.com/vboard/i...nsertimage.gif I don't know why a lot of people don't.

Re: Daverods project 66
 

It was so funny the other night I told my wife I might be getting a trans from a guy in Star. I was like where in the hell is Star anyways? Then not five minutes later this ad comes on TV it's some guy at a golfcourse in Star ?Idaho:lol:

Re: Daverods project 66
 

i dont get it :confused:

Re: Daverods project 66
 

:uhmk:He's from Star.:smoke: I can see how it would be confusing.;)

Re: Daverods project 66
 

oh ok bubba is from star
what kinda trans

Re: Daverods project 66
 

My manual 3 speed that I'm still waiting to see how much $ to get it fixed. He said he had one that he might sell to me. I looked at a 64 GMC to day good body no engine w/ 4 speed tran. Told him I could do 600 he wanted 1000. Have'nt heard back? No rust. For an Idaho truck that's just not right. I have a 283 sitting in my garage.

Re: Daverods project 66
 

Stupid question. I was looking at dropped spindles. The modular ones from cpp 70-71 $300 say "Allows earlier years to update to larger bearings". Any ideas what they are talking about and if it matters?

Re: Daverods project 66
 

Wahoo!!!
My old tranny is sitting on the garage floor tonight. Spent all darn day learning about tilt columns. I could not get it back together where it was not loose. Finally when I found an exploded view I could see , I had a piece in backwards. Works good now. Steering wheel is on and every thing. Truck is lifted up and on jackstands now and it is Transmission time.
Dave, look out -- I'm catching up --- I would post a picture but I haven't figured out how yet!!

Re: Daverods project 66
 

Do it this way [img] enter the properties of the image then [/img] Right click on the picture properties is at the bottom, select all , then copy the address and paste between the two img things. Take lots of pictures so I'll know what to do. Good work.

Re: Daverods project 66
 

Dave--Why does your avitar say you are offline right now? Bubba

Re: Daverods project 66
 

I just set it to stealth mode. I spend some much time on here I feel guilty:lol:And because I want to be like Allan:lol:

Re: Daverods project 66
 

that e-brake teeter/totter arrangement on the back brace is different! Do both old frame braces have to come out? I have a new mount for the TH350.

Re: Daverods project 66
 

i want to be like alan too but i dont know the ancient chinese secret that he does so this is all i got http://67-72chevytrucks.com/vboard/i...er_offline.gifhttp://67-72chevytrucks.com/vboard/i...er_offline.gifhttp://67-72chevytrucks.com/vboard/i...er_offline.gif

Re: Daverods project 66
 

I don't know? Sorry;)

Re: Daverods project 66
 

daverod, When you get a chance, check this out:
http://www.67-72chevytrucks.com/vboa...d.php?t=367371
We're trying to get a new sub-forum for 60-66 Projects and Builds
thanks

Re: Daverods project 66
 

It cost $25 to learn the secret.;) It's at the top of the page under subscribe.:lol: It works out to $25/360=.069. Just round it off to 7 cents a day.:ito: