The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   Tootsie build for my mother with cancer (https://67-72chevytrucks.com/vboard/showthread.php?t=516741)

belowme51 09-04-2012 06:40 AM

Re: Tootsie build for my mother with cancer
 
you will love those battery boxes, i put my red tops in them and super nice,sturdy and have just the right industiral look to them. love the frame. I seen it a few days ago and knew it was yours, congrats brother.

Low Elco 09-04-2012 08:19 AM

Re: Tootsie build for my mother with cancer
 
Frame is killer! Paint or powder? I wanna see the trailer! What's going on it?
Posted via Mobile Device

Lolyin58 09-04-2012 08:48 AM

Re: Tootsie build for my mother with cancer
 
Ah so nice Bro. That thing is going to unreal to drive. A ton of fun coming at you SOOOOON!!

superflysteiny 09-04-2012 10:58 AM

Re: Tootsie build for my mother with cancer
 
Quote:

Originally Posted by Chvy2NV (Post 5573241)
Uhhhhhhhhh...... I'll check back in later after I change my underwear. WOW.....
Posted via Mobile Device

:lol::lol::lol:
Quote:

Originally Posted by 67cheby (Post 5573263)
Unbelievable !!!!! Gorgeous ......!!!!'
Posted via Mobile Device

Thanks
Quote:

Originally Posted by texastrendz (Post 5573370)
Can my daughter come over and play on your new jungle jim. Just kiddin, killer as usual.

Come on over:lol::lol:
Quote:

Originally Posted by mikeleeshields (Post 5573582)
Soooo Prettty. That is amazing tube work. Cant wait till this is done.
Bye the way nice spread in street trucks.

Thanks I thought it was a cool article
Quote:

Originally Posted by belowme51 (Post 5573825)
you will love those battery boxes, i put my red tops in them and super nice,sturdy and have just the right industiral look to them. love the frame. I seen it a few days ago and knew it was yours, congrats brother.

Thanks I like the boxes should hold up nice. They are built for wheeling so I figured they would work just fine
Quote:

Originally Posted by Low Elco (Post 5573891)
Frame is killer! Paint or powder? I wanna see the trailer! What's going on it?
Posted via Mobile Device

Frame and all the parts will be painted. The trailer will be the same style as the frame with air ride fenders and billet wheels. It will have a drop member and a-arms too. Also the trailer will carry a custom 360 chopper that I have been building for a few years. Like I stated earlier this is my last truck I will build so I am going out with a Bang
Quote:

Originally Posted by Lolyin58 (Post 5573912)
Ah so nice Bro. That thing is going to unreal to drive. A ton of fun coming at you SOOOOON!!

Hope you are right brother

aggie91 09-04-2012 11:14 AM

Re: Tootsie build for my mother with cancer
 
That is going to be so cool when it all comes together. Your builds have been truely amasing. I only hope to see it in person one day...

Hope all is going well with your family and your mother is doing good.

65Pickup 09-04-2012 01:57 PM

Re: Tootsie build for my mother with cancer
 
Quote:

Originally Posted by superflysteiny (Post 5574065)
:lol::lol::lol:
Like I stated earlier this is my last truck I will build so I am going out with a Bang

You'll need a cigarette after this one;). A break well earned. Going to be a shame to cover the frame, so much depth.

Low Elco 09-04-2012 02:06 PM

Re: Tootsie build for my mother with cancer
 
Are you aiming for the Roadster Show?
Posted via Mobile Device

superflysteiny 09-04-2012 04:17 PM

Re: Tootsie build for my mother with cancer
 
Quote:

Originally Posted by aggie91 (Post 5574094)
That is going to be so cool when it all comes together. Your builds have been truely amasing. I only hope to see it in person one day...

Hope all is going well with your family and your mother is doing good.

Thank you and I hope you get to see her in person
Quote:

Originally Posted by 65Pickup (Post 5574343)
You'll need a cigarette after this one;). A break well earned. Going to be a shame to cover the frame, so much depth.

You can say that again
Quote:

Originally Posted by Low Elco (Post 5574355)
Are you aiming for the Roadster Show?
Posted via Mobile Device

Its all going to depend on money and time. If I run out of money then I will have to save more to do what I want. The thing is that I dont want to cut corners so it will depend. I wanted tohave it finished for AZ goodguys but I think I will fall short

Lolyin58 09-04-2012 05:34 PM

Re: Tootsie build for my mother with cancer
 
Eric, less dental work and More Truck work and before U know you will be in Scottsdale!
Posted via Mobile Device

superflysteiny 09-04-2012 05:37 PM

Re: Tootsie build for my mother with cancer
 
More money therefore more dental work:lol::lol::lol:

Nobaddaze 09-04-2012 10:47 PM

Re: Tootsie build for my mother with cancer
 
:jdp:That frame is RAD. is it hard to get the rear end in and out? looks like a tight squeeze. beautiful job as always

superflysteiny 09-05-2012 02:03 AM

Re: Tootsie build for my mother with cancer
 
Quote:

Originally Posted by Nobaddaze (Post 5575366)
:jdp:That frame is RAD. is it hard to get the rear end in and out? looks like a tight squeeze. beautiful job as always

Bottom bar will be removable
Posted via Mobile Device

c10seconds 09-05-2012 04:14 AM

Re: Tootsie build for my mother with cancer
 
Superfly...... my brother is d.m.d here in gilbert az and you make him look reeeal bad with all the cool stuff you put together. Lol! Im always showing him your work telling him he needs to step it up.

Your setting the bar on this stuff bro. Nice work! Can't wait to see a finished product
Posted via Mobile Device

superflysteiny 09-05-2012 10:59 AM

Re: Tootsie build for my mother with cancer
 
Quote:

Originally Posted by c10seconds (Post 5575683)
Superfly...... my brother is d.m.d here in gilbert az and you make him look reeeal bad with all the cool stuff you put together. Lol! Im always showing him your work telling him he needs to step it up.

Your setting the bar on this stuff bro. Nice work! Can't wait to see a finished product
Posted via Mobile Device

:lol::lol::lol:Nice thats great. Is he into trucks like you are ?

superflysteiny 09-05-2012 11:03 AM

Re: Tootsie build for my mother with cancer
 
More pictures coming your way today.

big_al_71 09-05-2012 05:32 PM

Re: Tootsie build for my mother with cancer
 
That frame looks awesome. Im looking forward to the next set of pictures..

superflysteiny 09-05-2012 05:38 PM

Re: Tootsie build for my mother with cancer
 
So am I Al so am I

nibs 09-05-2012 06:07 PM

Re: Tootsie build for my mother with cancer
 
HAHA, I could see how a frame like that could set you back a little! I bet all that fine work wasnt cheap. Im impatiently waiting for more :)

superflysteiny 09-05-2012 06:24 PM

Re: Tootsie build for my mother with cancer
 
I talked to nate it will be later today for the pictures. Nate treated me really fare on the frame

superflysteiny 09-05-2012 08:23 PM

Re: Tootsie build for my mother with cancer
 
Here are some more pictures it just keeps getting better. Can wait to see her in person http://i1005.photobucket.com/albums/...y/IMG_0362.jpg
http://i1005.photobucket.com/albums/...y/IMG_0361.jpg
http://i1005.photobucket.com/albums/...y/IMG_0360.jpg
http://i1005.photobucket.com/albums/...y/IMG_0359.jpg
http://i1005.photobucket.com/albums/...y/IMG_0358.jpg
http://i1005.photobucket.com/albums/...y/IMG_0357.jpg
http://i1005.photobucket.com/albums/...y/IMG_0356.jpg
http://i1005.photobucket.com/albums/...y/IMG_0355.jpg

big_al_71 09-05-2012 08:25 PM

Re: Tootsie build for my mother with cancer
 
Holy mother of !!#@#@$ it looks outrageus!!!! Love it!!

thor 09-05-2012 08:33 PM

Re: Tootsie build for my mother with cancer
 
do i see a 6L80?

nibs 09-05-2012 08:35 PM

Re: Tootsie build for my mother with cancer
 
Thats good! Im sure its HUGE advertising for him and his business.

lolife99 09-05-2012 09:00 PM

Re: Tootsie build for my mother with cancer
 
Simply AMAZING!
Is the rear suspension going to be a 4-link?

truckmanloco 09-05-2012 09:35 PM

Re: Tootsie build for my mother with cancer
 
You know how i feel about this frame from the first top secret photos i saw of it. Brother its gonna be a game changer for sure. Soon youll have a roller and a BIG pile of parts to throw at it.


All times are GMT -4. The time now is 09:10 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com