![]() |
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Nothin like a steady diet of WD40 and Coors Original to make the work go by! great looking work!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
2 Attachment(s)
Started welding the chassis in tonight heres some booger weld pics!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Nice welds!!!!!!!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Quote:
Posted via Mobile Device |
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
:lol: Nope, sure wouldn't have.
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
I applaud your outstanding vision, design and fab skills - your rig is bold and different
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Quote:
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
5 Attachment(s)
Started on the other side of the chassis...
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
1 Attachment(s)
Just a wide view pic.... Trying to make there mirror exacts once the chassis are done i will tie them together and start to build my motor and body mounts ect
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Amazing.... simply amazing.
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Quote:
Any advice from members like you is greatly appreciated (execpt for your small block theory!). A huge majority of the individuals on this forum are light years ahead of me with a wealth of knowlege that i would love and be honored to tap into as my build progresses... thanks again man Posted via Mobile Device |
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
4 Attachment(s)
Just getting the center part of the chassis together... still trying to make sure everything lines up.
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
5 Attachment(s)
Chassis almost done!!!! Time to pull the bottom one off and tack the chassis to the table to make sure its all level and get ready for full weld.
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
5 Attachment(s)
Just about there just finishing up some of the bottom
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
1 Attachment(s)
Hold Coped tube batman!!!!!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
5 Attachment(s)
Just more progress...
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
4 Attachment(s)
yay! finally done, just need to fully weld it together!!!!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
1 Attachment(s)
Has taken 77 hours to get to this point. I figure it will be another 3 or so hours to weld together depending on how much the frame wants to flex and oil can. Id love to complete it all together ready to powder coat in 90 total hours...
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Great work! There are a lot of cutting and fitting in these pics! Man you have talent and big kahones! :lol: By the way, sweet car next to the lift!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Quote:
The car if its blue is a 71 challenger rt with a 383 stroker. If its a truck then its a 59 chevy fleetside with a crate 350 regardless thanks! Posted via Mobile Device |
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
I know about take about half off other wise you end up with a pile of tubing that is worthless to anyone other than the scrap pile. :lol: Yeah, it was the Challenger. I'd love to have one some day!
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Quote:
Posted via Mobile Device |
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Needs more triangulation:uhmk:
|
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
Quote:
Posted via Mobile Device |
Re: 540 BBC 68 Burb Dually 54" Boggers on Rocks
So started welding the chassis together and its just taking a bit of time cause just want to make sure it doesnt warp real bad by heating up. So the technique is just weld a few joints then do some body work and let it cool down. When body filler is applied while waiting for it to harden weld a little bit more ect.
In the mean time i transfered the body from my house where alot of the work was done to it and brought it over to my friends shop so that i would have a bigger spot to work on it as well as making the chassis mating alot easier. |
All times are GMT -4. The time now is 09:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com