Re: 2003 LSx swap thread...here we go
LS1 wiring did it. I thought that was right but wanted to check before I said anything.;):chevy:
http://lt1swap.com/wiringharness.htm |
Re: 2003 LSx swap thread...here we go
Great job Andy. Now that truck will be even that much harder to keep up with on the '14 tour. Looking forward to meeting up with you all in June to make that trip to the Dells. Have you been in touch with Big Dave and the group from last year? I have not been on bangshift. Was a rough summer health wise for me but I'm back.
|
Re: 2003 LSx swap thread...here we go
Quote:
Talked to Bruce this morning. Looks like it's going to be done on time and should have it ready for our jan 25th local meeting at Twin Peaks in Greenville SC.;):chevy: |
Re: 2003 LSx swap thread...here we go
Went by Hawks today and dropped off the parts they needed. The motor is in and they are doing final prep work. Had to redo the cooling though the motor fan is gone and they put dual electric fans instead. The other way wasn't going to allow enough room for the air intake hose and mass senor.
They built the headers for it and tweeked the fram a little on the passenger side. They did a great job on the frame because I couldn't even tell where they tweeked it at. Had to cut 1 1/2" off the drive shaft and put new yoke on it. The computer is back inside the glove box like before so I'm happy about that not being out on the front fender well. They have the AC compressor mount but are waiting on a serpinten pully for the compressor. Thats it except for hooking all the connectors up. They drilled the water pump for the steam line. They said hope to have it running by Friday, keeping my fingers crossed!;):chevy: www.hawksthirdgencamaro.com http://67-72chevytrucks.com/gallery/.../DSCF03551.JPG http://67-72chevytrucks.com/gallery/.../DSCF03561.JPG http://67-72chevytrucks.com/gallery/...m/DSCF0357.JPG http://67-72chevytrucks.com/gallery/.../DSCF03581.JPG |
Re: 2003 LSx swap thread...here we go
Nice progress!!
|
Re: 2003 LSx swap thread...here we go
I hope he can get the AC compressor clutch swapped out and have it running by Friday. I'm off again Friday so I plan to go by and check on it. Keeping my fingers crossed.;):chevy:
|
Re: 2003 LSx swap thread...here we go
Did a plug & wire tune up on my 08 Tahoe this past weekend and the back side plug on the passenger side was a pain in the ass. I had to remove the front tire and cut part of the plastic out of the wheel well to get that sucker out. Had a 10" extension with sweval joint on it to reach up to the plug.
The 71 will be much easier to do with this kind of room.:chevy: http://i1233.photobucket.com/albums/...ps13b68018.jpg |
Re: 2003 LSx swap thread...here we go
Well another week. The AC compressor was on back order! They said it should be here this Tuesday. 1-22-14 so hope by Friday it's running. They did crank it up and it ran very shortly but it ran! Ya!
I hope I can drive it to the SC meet Saturday in Greenville then the shack down ride to Myrtle Beach SC in March for the Run to the Sun show.;):chevy: |
Re: 2003 LSx swap thread...here we go
You don't need no stinkin AC... I guess the compressor in the pictures is bad?
So they built custom headers for you that's cool, Looking good Andy. |
Re: 2003 LSx swap thread...here we go
Quote:
|
Re: 2003 LSx swap thread...here we go
Andy, will you have your truck for the club meeting Sat? Shon and I should be there
|
Re: 2003 LSx swap thread...here we go
Quote:
I was sure hoping to but it's not looking to good right now. I called today and Bruce was gone. Never herd back from him. |
Re: 2003 LSx swap thread...here we go
It's been a long day. Just got home about 1 hr ago! But I drove the truck HOME!!!!! Yeeeeeha!
I have to take it back but from what I drove it it seems to be good. I think they will need to rebalance the drive shaft though. It has a noticable viberation around 50MPH. I also have to get the AC finished up and Dino it after I get the new 2.5" eshaust done. But it seems to be running good. They had to swap water pumps out and that threw them behind but they stayed until they got it done for now. It took awhile to get all the air out of the system. I'll post some pictures tomorrow in the light. ;):chevy: |
Re: 2003 LSx swap thread...here we go
Come on, don't be smug...how much power does it have?? :lol:
|
Re: 2003 LSx swap thread...here we go
Looking forward to seeing it tomorrow
|
Re: 2003 LSx swap thread...here we go
2 Attachment(s)
As far as HP it's all stock for now. I say this though! I like how it responds to the pedal! It has a good smooth response. I was driving it easy to listen for noises so I didn't get on it + it was all in town driving for the most part. Tomorrow it will be going up I-85 to the local board meet so I should get a better idea of how it runs. + I hooked the scan gauge up when I got home!
-T- looking forward to meeting you and seeing the trucks.;):chevy: |
Re: 2003 LSx swap thread...here we go
Glad you got it back, will wait for you update tomorrow...Jim
|
Re: 2003 LSx swap thread...here we go
Well I drove the truck over to Greenville today for our little local meet. Ended up with about 12 trucks. That's pretty good turnout for being so cold.
The truck ran fine with no problems. Have a few things to have fixed when I take it back for the final tune but over all it's nice having some power under the hood for a change!;):chevy: |
Re: 2003 LSx swap thread...here we go
1 Attachment(s)
I was just looking over the motor and noticed this. The vacum port isn't connected to anything. Where should it go are should I just cap it off. Seems like it would suck dirt in it when th motor is running.:chevy:
|
Re: 2003 LSx swap thread...here we go
Quote:
http://i1233.photobucket.com/albums/...psbb3a5c8f.jpg |
Re: 2003 LSx swap thread...here we go
I guess in them trying to get it ready for me Friday he forgot. I should have some vacum hose. I'll go out and put it on.
The trottle body was capped off. I'm just going to cap it for now. I'm making notes for the things they have to do to it.;):chevy: |
Re: 2003 LSx swap thread...here we go
5 Attachment(s)
Some more pictures I just took of it.
Would a shroud on the fans help keep it coolier you think? They cut my orignal shroud up to see if the motor fan would work so I have it to cover them with.;):chevy: |
Re: 2003 LSx swap thread...here we go
Very nice Andy4639. Enjoy it. Everyone feels that they need 9000 HP and 9000 ft. Lbs, but those 5.3 are more than capable. Smooth ride, A/C, and a drive train that you'll enjoy on the hot rod power tour. You get my thumbs up.
|
Re: 2003 LSx swap thread...here we go
Quote:
|
All times are GMT -4. The time now is 08:09 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com